Textile Industry Products

Textile Industry Products, Materials & Material Processing

Architectural Mesh features circular patterns.

October 22, 2013

Unlike circle patterns created by perforated metal, Circle Mesh woven metal fabric delivers optimized sustainability and visual characteristics while producing minimal scrap. Circle Mesh is woven with same wire as traditional architectural mesh, but is instead crimped by spiral machine around fixed point. Since fixed point is adjustable, process allows for different sizes and different percentages of open area. Finished wires are then woven together by loom operator, creating final pattern. Read More

Textile Industry Products, Materials & Material Processing

High-Performance Hybrid Yarns enhance composite applications.

October 3, 2013

Used in reinforcement and composite manufacturing processes, Innegra™ H series is engineered to meet industry demand for lightweight, damage- and impact-resistant solutions. Product consists of high-performance olefin yarn co-mingled with other high-performance composite fibers, including aramid, basalt, carbon, and glass, to increase durability and avoid shattering effect associated with lightweight composites. Hybridization is done at filament level, allowing more homogeneous final part. Read More

Textile Industry Products, Chemical Processing & Waste Management, Materials & Material Processing

Low Lead Polyester is engineered for industrial use.

June 21, 2013

Developed with low lead formulation, 600 X 300 Denier PVC Backed Polyester features 0.55 mm vinyl embossed backing. It is engineered for industrial applications including use in bags, luggage, indoor covers, and custom cases. Product is available in CPSIA Compliant options. Read More

Textile Industry Products, Green & Clean, Materials & Material Processing, Non-Industrial Products

PFOA-free Water/Oil Repellent enhances textiles, nonwovens.

June 19, 2013

AsahiGuard AG-E550D, free of perfluorooctanoic acid (PFOA) at or above detection limits, offers safe and effective alternative to C8-based products. When formulated into nonwoven textiles and textile finishes for outdoor and work clothing, fluorinated finishing agent provides water and oil repellency and stain resistance – even after multiple wash cycles. Nonflammable, C6 fluorinated polymer-based solution is also compatible with residual materials from preceding production processes. Read More

Safety & Security Equipment, Textile Industry Products, Agricultural and Farming Products, Materials & Material Processing

Recycled Nonwoven Fabric acts as long-term weed killer.

June 18, 2013

Made with repurposed materials, GGT W.K WEED KILLER is landscaping weed control fabric that delivers 20+ years of weed-free flower beds and gardens. This nonwoven weed barrier, commonly used under walkways and driveways, is also used in walkways and retaining wall projects for materials separation and soil retention. Read More

Adhesives & Sealants, Textile Industry Products, Paints & Coatings, Materials & Material Processing, Architectural and Civil Engineering Products

Metal Roofing Products extend commercial/industrial roof life.

June 14, 2013

Using elastomeric roof coating technology formulated with 100% acrylic polymer for optimal adhesion, water protection, and durability, Fluid Applied Metal Roofing Systems comprise metal top coats, primers, and patching; skylight restoration; as well as seam tape and fabrics. ENERGY STAR®-approved products protect building envelope from harsh weather, airborne pollutants, and emissions. They can also reduce roof surface temperature up to 100°F and minimize buildings' cooling demands. Read More

Textile Industry Products, Material Handling & Storage, Cleaning Products & Equipment, Materials & Material Processing

Cotton Pads have multipurpose design and come in 2 sizes.

June 12, 2013

Multi-purpose, bulk-packed cotton pads, gentle enough to use for removing makeup as well as applying astringents, toners, or lotions, cater to spas, salons, and beauty counters with high usage rates. While Part No. 93310 measures 3.25 x 3.75 in. and comes in bag with 200 pieces, Part No. 93311 measures 2 x 2 in. and comes in bag with 500 pieces. Read More

Textile Industry Products, Printing & Duplicating Equipment, Cleaning Products & Equipment

Central Impression (CI Press Cleaner) Drum Cleaner targets wide web flexographic printing industry.

June 3, 2013

Featuring selectable multi-wiping functions, MX Central Impression Printing Press Drum Cleaner enables operator to select smooth pad or bristle brush for cleaning inks and slip that has accumulated on drum surface. System also offers multi-function controls for maximum wiping effectiveness. It can provide full drum wipe, wipe from center of drum out to each edge of product, or just product edges. In addition, cleaner can wipe in single spot location dialed in on HMI by operator. Read More

Safety & Security Equipment, Textile Industry Products, Materials & Material Processing, Non-Industrial Products

High Heat Garments feature non-aluminized design.

May 9, 2013

Designed for workers in high heat environments, Stealth line features silicone coated outer shell that allows molten metal splash to slide off. Lightweight material offers flexibility and high range of motion. In addition to providing comfort, Stealth garments are inherently flame resistant, meaning FR properties will not wear out with use over time. Standard version is available in 8 or 10 oz fabric weights, while deluxe version features ventilated back and reflective striping for visibility. Read More

Textile Industry Products, HVAC, Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Machinery & Machining Tools, Cleaning Products & Equipment

Air Blower/Dryer comes in stand-alone and stackable versions.

April 10, 2013

Used to dry carpets, upholstery, and other surfaces, Windshear™ Storm is offered as stand-alone system for drying carpets in small to medium-sized rooms or another version that allows stacking of multiple units for increased power and performance. This 120 V, 22 x 16.5 x 11.5 in. unit runs on 2.4 A max, weighs 17.75 lb, and has rated air velocity of 3,400 fpm. Suited for disaster and restoration cleanup operations, dryer provides 0°/30°/90° airflow direction and has 24 ft power cord. Read More

Textile Industry Products, Controls & Controllers

Open Loop Tension Controller incorporates advanced features.

April 10, 2013

Compatible with various inputs, U4 provides such features as soft start, anti-coast, taper tension, inertia compensation, and diameter alarms as standard. Functionality ensures accurate tension control from full roll to core without requiring additional idler rollers. Able to be used as unwind or rewind controller, this panel- or surface-mounted unit can save up to 9 groups of tension parameters for immediate recall and offers both 0–10 V or 4–20 mA outputs. Read More

Textile Industry Products, Materials & Material Processing

Ultra-Fine Yarns are designed for use in PCB substrates.

March 22, 2013

Used as reinforcement and dielectric, BC2250 and BC3000 allow PCB suppliers to create thinner laminates for higher layer counts and greater circuit density. Yarns are woven into fabric and then laminated with epoxy resin and copper foil to produce copper clad laminate. E-Glass composition contributes to electrical insulation and provides thermo-mechanical stability, and reinforcement with glass fiber fabrics promotes dimensional stability. BC3000 consists of 50 filaments of 4 micron dia. Read More

Textile Industry Products, Materials & Material Processing, Architectural and Civil Engineering Products

Shade Fabric provides exterior sun control.

March 5, 2013

Intended for exterior roller shade applications, SunTex® 95 vinyl-coated polyester fabric is full basketweave with 5% openness factor. Fabric promotes cooler outdoor environment by stopping ~95% of sun's hot rays for heat and glare control. Available in 126 in. width in 6 neutral colors, this mildew and fade resistant product is infused with Microban® antimicrobial product protection and is also GREENGUARD® and GREENGUARD Children and Schools Certified. Read More

Textile Industry Products, Materials & Material Processing

Glass Fiber features tensile modulus of 14,359 ksi.

November 20, 2012

Developed using Modular Direct Melt production technology, S-3 UHM™ utilizes unique formulation of S-Glass raw materials to develop mechanical properties. Material is available in range of different formats including yarns, rovings, and chopped fibers. With S-3 UHM, designers and manufacturers will be able to use glass fiber reinforcement in areas previously limited to other types of fibers. Read More

Textile Industry Products, Machinery & Machining Tools

Sheeting and Cutting Equipment targets high-speed applications.

July 20, 2012

Used with film, foil, paper, non-woven, laminate, composite, or other flexible material, FGW-1000 Sheeter is modular system with take-away conveyor. Integrated SUR-SIZE(TM) Cut-to-Length assembly indexes and cuts material to predetermined length, and features servo-motor drive for cutting materials up to 39.4 in. wide. Motorized unwind stand, with optional edge guide, and cut-to-length assembly with optional slitter are included. Sheeter suits any converting or material handling environment. Read More

Safety & Security Equipment, Textile Industry Products, Materials & Material Processing

Multilayer Aluminized Fabric protects firefighters.

May 9, 2012

Z-Flex® Silver(TM) multilayer aluminized fabric system combines Z-Flex Multilayer Aluminization (MLA(TM)) technology with 3D Mock Knit(TM) fabric featuring PBI flame resistant fibers. By reflecting back heat and protecting firefighters from high energy, radiant heat, Z-Flex® Silver(TM) 5-layer outer shell composite allows close flame proximity while reducing rate of heat absorption that can lead to thermal fatigue. Product meets/exceeds all current UL certifications, including NFPA 1971 and OSHA requirements. Read More

Textile Industry Products, Machinery & Machining Tools

Automatic Butt Splicer accommodates rolls up to 48 in. dia.

March 28, 2012

Featuring heavy-duty cantilevered unwind design, Model S-900AB-ACV is suitable for splicing variety of materials, including tag, label, board, film stocks, and other thick or double ply materials. Web accumulator is separate, and can be placed at left or right side of splicer, allowing machine to work in either direction with diversion roller change. Automatic gapless butt splicing of web with 2 pieces of tape, 1 applied to each side, is standard. Read More

Textile Industry Products

Web Converting System handles 18-24 in. web widths.

March 8, 2012

Custom-designed based on specific needs, High Capacity Delta Crusader® provides modular platform for manufacturing and finishing of wide webs and large parts. Expanded web width also offers solid inline or offline converting and finishing solution for digitally printed web. Variety of process modules may be incorporated into system, such as full rotary and semi-rotary diecutting, over and under laminating, coating, precise part placement, slitting, sheeting, and pouching. Read More

Textile Industry Products, Health, Medical and Dental Supplies & Equipment, Materials & Material Processing

Medical Fabric can be RF welded, heat and sonic sealed.

February 17, 2012

Available in 54 and 60 in. rolls, Medical Fabrics are suited for fabricating inflatable medical products. These soft, non-stretch, thermoplastic polyurethane-coated nylon fabrics hold air, water, and gels and can be manufactured using RF welding as well as heat and sonic sealing technologies. Flame-retardant, fluid-proof, cleanable, stain-resistant, anti-bacterial, and anti-fungal fabrics, offered in blue, black, and maroon, come in various fabric deniers, including 70d, 210d, and 420d. Read More

Textile Industry Products, Machinery & Machining Tools, Materials & Material Processing

Extrusion and Calendering Line handles pharmaceutical substances.

February 1, 2012

Featuring modular, customizable design, Pharmaceutical Melt Extrusion and Calendering Line includes Pharma Extruder WCF 0040PH, which continually processes substrate with active ingredients through melting, mixing, kneading, aerating, tempering, and forming stages. Mass is extruded to Pharma Calender BPK 0050, ensuring accurate forming of tablets by using dual rollers with forming cavities. Pharma Cooling Tunnel BCK 0050 cools by means of contact cooling from below transport belt. Read More