Permabond    Somerset, NJ 08873
Nov 07, 2002 Series 790 fast cure adhesives range in viscosity from 1 to 6,000 cP. Depending on viscosity, set time ranges from 1-12 sec. All are clear to slightly yellow in color, and when stored at 35-45°F, have shelf life of 12 months. Adhesives provide extremely fast cure on most substrates including wood, plastics, metals, and elastomers. They are suitable for rapid assembly operations. Sizes include 3 g, 1 oz, 1 lb, 4.4 lb, 10 Kg, 25 Kg, and 125 lb containers.

Double E Co., Inc.    West Bridgewater, MA 02379
Nov 05, 2002 Model RK31 remote web guide controller is equipped to control up to 10 web guides at same time. It connects to web guide driver(s) using single Serial BUS RS485 cable to facilitate electrical installation requirements. Controller can receive signals from ultrasonic, infrared, and camera sensors for line, center, or edge guiding. RK31 includes LCD display that communicates instructions for initial calibration and for setting web guide parameters.

Naugahyde    Stoughton, WI 53589-2481
Oct 14, 2002 NaugaTrans meets DOT Federal Railroad Administration 49 CFR Part 216 Federal Register Vol 64, No 91 Rules and Regulations for flammability and smoke emission requirements. Intended for use in subway cars, buses, and train cars, material is offered in most colors used by public transporation. It meets low smoke, low flame requirements (2-200 specification) and passes accelerated weather resistance testing. Seating vinyl is available in 54 in. width rolls.

Balluff, Inc.    Florence, KY 41042-0937
Sep 27, 2002 One-piece BGL sensors for part location, height verification, and edge detection have pre-aligned optics integrated into metal fork-style body, allowing for plug-and-play installation. Resolution is 0.3 mm, repeatability is 0.02 mm, and hysteresis is less than 0.1 mm. Sensors are available in sensing gap slot sizes from 5 to 120 mm, are protected against short circuits/reverse polarity, and are user-selectable for NO or NC operation.

Balluff, Inc.    Florence, KY 41042-0937
Sep 27, 2002 HyperPROX 4X long-range proximity sensor incorporates on-board temperature compensation ICs that eliminate impact of temperature on sensing distance. Sensor may be mounted farther away from target, minimizing risk of mechanical damage. Applications include controlling, regulating, automating, positioning, and monitoring work processes in machine-tool, plastics, textile, and automotive industries (or anywhere processes must be automated).

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Sep 27, 2002 SpectraLight® Jr provides multiple light sources for color matching and evaluation of color quality/uniformity. It uses filtered tungsten halogen daylight technology. Unit is equipped with 5 selectable light sources for various color evaluations and metamerism testing. Interior is made from low gloss, neutral-gray material. It includes push button membrane keypad, removable diffuser, and separate on/off control for UV source.

Invensys    Foxboro, MA 02035
Sep 27, 2002 Real-time, in-process Inspection Accelerator, designed to accelerate material processing, offers high-speed image capturing, processing, and analysis for defect and anomaly detection. It also provides classification, visualization, enunciation, tracking, and marking for unpatterned, continuous sheet and web materials. System inspects web speeds of more than 3000 fpm, web widths of more than 30 ft, and defect resolutions of less than 0.5 mm.

Dover Flexo Electronics, Inc.    Rochester, NH 03867
Sep 26, 2002 MAC MultiAmplifier Card and IMUX Tension Multiplexer provide multi-point tension monitoring. MAC amplifies signals from up to 8 tension transducers or load cells, and supplies corresponding number of 0 to 10 Vdc signals. Signals may be used as inputs to drives, PLCs, or other control devices. Additional 0 to 1 mA or 0 to l00 microA signal is supplied as meter output. IMUX can select and display up to 32 inputs from MACs or other tension amplifier devices.

LMI Technologies Inc.    Southfield, MI 48075
Sep 26, 2002 Non-contact, laser-based, industrial gauging sensor, based on shadow measurement principle, is suitable for non-stationary, rubber, metalworking, aluminum, paper, textiles, and plastics applications. Class II Laser Beam Sensor (LBS) consists of emitter and receiver, and allows up to 3.3 ft distances between them. Measurement range varies from 0.02 to 1 in., accuracy is better than 0.5 percent at 10 kHz, and resolution is less than 0.1 percent of measurement range.

Reemay Inc.    Old Hickory, TN 37138 3651
Sep 26, 2002 Typar® Super Scrimâ„¢ spunbonded polypropylene media offers high airflow, and can be electrostatically charged. Available in weights from 1.75 to 8.0 osy, it is suitable for ASHRAE-related pleated or multi-pocket bag filters. It can be used as backing, facing, or between layers of filtration media. Super Scrim has no binders such as glue, adhesives, or acrylic to limit filtering area. It maintains physical properties when wet and is dimensionally stable.

Contech    Goddard, KS 67052
Jun 05, 2002 Non-Stop Inline Sheeter/Stacker takes material coming off production system and sheets it; sheets are then stagger-stacked onto pallets that are automatically changed out when full. Festoon-type accumulator allows on-the-fly change out. While pallets are being changed, accumulator collects web so web does not have to stop.

Krylon Diversified Brands    Cleveland, OH 44115
Apr 30, 2002 White Lightning(R) WL03100 two-sided contact trim adhesive withstands 200 deg F. It forms fast, aggressive bonds that are water resistant. WL03101 repositionable adhesive provides clear, tape-like bonds with tack range up to 3 hrs. WL03102 fast tack adhesive forms fast, permanent bonds that are water resistant. WL03103 industrial strength adhesive dries in 1 minute and is heat resistant up to 120 deg F. WL03104 foam and fabric adhesive is low misting and has variable spray pattern.

Naugahyde    Stoughton, WI 53589-2481
Apr 29, 2002 NaugaTek fabrics are designed for use in seating applications. They are available in 11 colors and meet requirements of hospitality and health care industries. Other uses include transportation, recreation, and commercial applications.

Contech    Goddard, KS 67052
Apr 22, 2002 Roll-Fed System slits and sheets rolls of material weighing up to 8,000 lb. Material is slit, accumulated through controlled gravity loops to restrict material stretch, and cut using gap shear cutter. Gripper stacker grabs sheets and stacks them for use. Operator needs only to load roll, adjust sheet length and slit width, and unload stacks of finished material for next processing operation.

Double E Co., Inc.    West Bridgewater, MA 02379
Mar 20, 2002 Double E/Re web guiding system utilizes 3-zone system with zero point centered in dead zone. Dead zone is flanked by slow and standard zones. System adjusts web if it moves away from zero point into slow or standard zones in exact proportion to problem. DC stepper motor requires little or no maintenance. Options include digital microprocessor control panels and edge, center, and line guide sensors.

Nexen Group, Inc.    Vadnais Heights, MN 55127
Mar 14, 2002 Dancer Control System includes RSD100 digital dancer position controller, EN50 electro-pneumatic transducer, DPS 30 or 60 dancer position sensor, and power supply. RSD 100 interfaces with brake, clutch or motor drive to provide stable web tension. Dancer position sensors accurately measure rotational movement of dancer arm. EN50 electro-pneumatic transducer allows RSD to interface directly with air engaged brakes/clutches.

Avery Dennison, Fastener Div.    Framingham, MA 01702
Mar 12, 2002 Portable MicroTach(TM) hand tool inserts 0.172 in. T-End fasteners through fabrics and paper or cardboard packaging, replacing thread, pins and metal staples. Fasteners can hold 2 pieces of fabric tightly together or secure fabric to packaging. Tool is made of polycarbonate material for use in factory environments. It is available with brush anvil, which can serve as firm fastening application surface.

Webex, Inc.    Neenah, WI 54957 1026
Dec 17, 2001 Air Turn bars flip web over or change its path 90 deg. Bars fit above or below other machinery, eliminating need for additional machine length. Multiple styles and configurations, including low-inertia and low-tension models, are avilable. Components are sized to meet application needs and have custom-drilled and grooved surfaces. Air turn bars, with adjustable alignment, install easily and can be built to accommodate any speed range.