Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Apr 13, 2012 Designed for CT3 Tester, which operates in both compression and tension modes, TA-CLT Capsule Loop Tensile Test Fixture measures tensile breaking strength of hard gel capsules. Gel cap is mounted between 2 pins which pull apart, thereby measuring force required to rupture cap. Featuring guillotine type design, TA-BLS Bilayer Shear Jig measures force required to separate layers of multi-layer tablet. Tablet is placed in jig and cutting plate slices into tablet until adhesion fails.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Dec 23, 2010 Designed to measure rate of decay of orally disintegrating tablets (ODTs), spring loaded probe adapter utilizes natural force linearity of its internal spring to relate decrease in force to shrinking size of tablet. Operator touches ODT with adapter, pressing until spring is compressed distance equal to length of tablet. Appropriate liquid is then added, and spring relaxes as tablet disintegrates. Product is compatible with CT3 Texture Analyzer.

GOEPEL electronics LLC    Austin, TX 78759
Jun 17, 2010 Compatible with Advanced Mezzanin Cards (AMC) for ATCA systems, CION Fixture(TM)/AMC interface test fixture comes with preset AMC slot in which card is inserted and connected to TAP (Test Access Port) at same time. Integrated IEEE 1149.1 and IEEE1149.6 test channels allow structural test of all high- and low-speed signal pins. Solution supports compact, mid-size, and full-size modules with AMC B+ interface and is compatible with PICMG AMC.0 R2.0 standard.

Touch International    Austin, TX 78758
Mar 19, 2010 Projected Capacitive Test Fixture allows use of sampling method to verify integrity of touchscreens. Selected screens are individually connected to testing unit which outputs digital reading of sensor's touch levels and provides result of pass/fail. Fixture includes projected capacitive controller, 2 FPC adapter cables, power adapter, RS232 cable, as well as projected capacitive testing software. Each device is designed according to customer specifications.

Robson Technologies, Inc.    Morgan Hill, CA 95037
Jan 25, 2010 The Phoenix maintains internal ambient temperature around 98.6°F ±0.5°F for testing implantable medical devices, and use of conduction and convection allow it to go as high as 110°F. Chassis uses 3 separate compartments to isolate driving circuitry, heating element, and device under test, and integrated temperature controller provides way to set and monitor internal temperature during test. Unit accommodates high voltages, includes RF shielding, and supports multi-site testing.

Lloyd Instruments Ltd. Forum House    Hampshire Hants  United Kingdom
Sep 10, 2009 Including upper wedge grip and lower fixture containing rollers which can be used in conjunction with low force universal materials test instruments, TG113 is designed for peel strength testing of laminated layers of standard plastic ID cards in accordance with ISO/IEC 10373-1:2006 (E). Jig allows 90° peel tests to be made at forces up to 200 N. Up to 4 test strips per card can be prepared and tested.

Micro Control Co.    Minneapolis, MN 55432
Jul 21, 2009 Featuring individual temperature control per DUT for 24 devices up to 20 W, LC-2 Logic Burn-In with Test System is suited for applications in engineering characterization, life testing, and production screening of logic devices. System accommodates up to 64 burn-in boards sized at 12.3 x 24 in. It includes 5 individually programmable power supplies per burn-in board, 16 pattern and power zones, 12 vector formats per pin per cycle, and 128 digital I/O channels per burn-in board.

Lloyd Instruments Ltd. Forum House    Hampshire Hants  United Kingdom
Jan 05, 2009 TG4975 performs 3 point bend tests on polystyrene samples measuring 11.81 x 5.91 x 1.97 in. in accordance with standard EN 12089: 1997 (Method B). Designed for use with loads up to 1,000 N, jig consists of extruded aluminium base with fixed center of 9.84 in., and 2 circular supports are fitted to base. Sample is placed centrally between 2 supports and in parallel with them. Upper loading anvil with 5/8 in. eye end is fixed to load cell and driven down onto sample midway between 2 supports.

Components Corp.    Denville, NJ 07834
Aug 04, 2008 Featuring 0.125 or 0.100 in. centers, TP-104, -105, and -106 test points can accommodate 0.062 in. thick PCBs. Provided precut to any of 30 positions, loop-style TP-104 and oval-loop style TP-106 test points feature 0.063 in. mounting holes, while TP-105 is available in up to 40 positions, has loop profile for positive loop retention, and fits into 0.035-0.042 in. hole. Devices are designed to ensure secure, non-slip grip of alligator clips, probes, J-hooks, tips, and grabbers.

Aehr Test Systems    Fremont, CA 94539
Nov 05, 2007 Contacting every die on each wafer simultaneously, FOX-15 provides parallel testing and burning-in of up to 15 wafers at a time. System includes general-purpose memory and logic pattern generator as well as individual die power channels to isolate shorted die. Providing up to 1,000 W power dissipation per wafer, FOX-15 features liquid temperature control that maintains chuck temperature ±3°C.

DPS Telecom    Fresno, CA 93727
Oct 17, 2007 With NetGuardian 3288 Test Fixture, network technicians can self-diagnose problems within their own network monitoring. Unit allows for testing of complete monitoring system: remote, transport, and alarm master. Tool has 32 discrete alarm toggles, 8 analog knobs, and 8 control relay LEDs. While discrete alarms indicate only alarm or clear states, analog inputs allow detailed monitoring of temperature, humidity, battery levels, and other analog values.

Micro Control Co.    Minneapolis, MN 55432
Jun 11, 2007 Providing 16 user-defined pattern and power zones, LC-1 Logic Burn-In with Test System accommodates 64 burn-in boards up to 24 x 12.5 in. and 128 I/O or 32 burn-in boards up to 24 x 24 in. and 256 I/O. Offering programmable temperature control up to 150°C, system features 4M vector memory depth and provides per pin timing, testing, and formatting of pattern data. Applications include engineering characterization, life testing, and production screening of low-power logic devices.

Micro Control Co.    Minneapolis, MN 55432
Mar 07, 2007 Useful for meeting JTAG requirements, LC-1 Logic Burn-In with Test System accommodates 64 burn-in boards at up to 24 x 12.5 in. and 128 I/O, or 32 burn-in boards at up to 24 x 24 in. and 256 I/O. It offers 16 user-defined pattern and power zones, 16 M vector memory depth, and scan mode vector memory up to 2 G deep. Featuring programmable temperature control up to 150°C, system provides per-pin timing, testing, and formatting of pattern data.

Micro Control Co.    Minneapolis, MN 55432
Jun 13, 2006 LM-1 Logic and Memory Burn-In System has system capacity of 1,536 devices when individual temperature control is required or 6,400 device capacity when conventional burn-in cycle is run. Burn-in-with-test system features 300 A current per burn-in board, programmable temperature control up to 150ºC, and scan mode vector memory up to 1 G deep. Handling up to 32 burn-in boards, system can be customized to burn-in different device types during same cycle.

Agilent Technologies, Inc.    Santa Clara, CA 95051
May 08, 2006 With measurement bandwidth beyond 6 GHz and rise times below 100 ps, N1020A fixture is used in conjunction with Infiniium Oscilloscopes and HDMI Transmitter Compliance Test solution for consumer electronics. Available in K12 and K13 options, it supports test needs for HDMI as specified in HDMI Compliance Test Specification 1.2a. Product is available in Plug-End or Receptacle-End models.

Instron    Norwood, MA 02062-2643
Apr 11, 2006 Designed for static bend/flexure testing on wood and timber products, 2820-04x Series bend fixtures come in 10 and 50 kN capacities with 800 and 1,200 mm max span lower beams. Shear fixture 2820-060, featuring specimen clamp and interchangeable shims, measures compressive shear strength of wood and adhesive products. Incorporating self-aligning coupling and rotatable lower grip, 2820-061 internal bond fixture measures force needed to separate internal wood fibers in chipboard and fiberboard.

Witte L.P. USA    Tucker, GA 30084
Sep 13, 2004 Alugrip enables users to build stable measuring and checking fixtures that can be integrated and used together with existing Alufix material. Profiles that run lengthwise on bars enable teeth on connection elements to have firm hold and tight grip in any position on bar. Bars are constructed from high-tensile aluminum.

Magtrol, Inc.    Buffalo, NY 14224-1322
Mar 12, 2004 Adjustable Motor Fixture locates and holds motor in place for running any test, while maintaining center height required for coupling to company's HD-106 through HD-715 Hysteresis Short Base Plate Dynamometer. Lead screw adjustment provides centering for motor while T-Slot Base supplies multiple position options for various motor lengths. Adjustable bridge provides clamping anywhere along axis of motor and thumbscrew protects against vibration.