Temperature Testers

Test & Measuring Instruments

Stainless Steel Data Loggers employ 2 remote, flexible probes.

November 12, 2015

OM-CP-HITEMP140X2-FP Series uses 2 probes that can measure up to 662°F with ±0.18°F accuracy. Offered in combination of flexible PFA insulation and bendable stainless steel, dual probes allow for simultaneous monitoring and can be used for oven mapping, surface temperature monitoring, autoclave validation, and sterilization processes. Flexible probes are maneuverable and suited for temperature monitoring inside small vials, test tubes, and other small-diameter or delicate applications. Read More

Sensors, Monitors & Transducers, HVAC, Test & Measuring Instruments

Intrinsically Safe Level Sensor incorporates HLS technology.

November 11, 2015

Providing direct measurement of level and temperature, hazardous location-certified Model 2100 Digital Level Sensor (DLS) with High Level Shut-In (HLS) helps operators with production storage tanks meet Category 3, API STD 2350 requirements while mitigating risk of environmental exposure to petrochemicals. Sensing technology ensures measurement of up to 2 levels and 8 temperature measurements in same tank, and dedicated safety circuit ensures high and high-high level overfill protection.
Read More

Test & Measuring Instruments

Stand-Alone Datalogger supports remote monitoring via LTE.

November 4, 2015

Utilizing FPGA technology, Expert Logger can process up to 46 analog input channels. Measurement data is acquired, independently stored, and transmitted to Internet or PC via USB, LAN, WLAN, or LTE. Able to communicate via CanBus, ModBus, and PROFIBUS, instrument stores up to 400 million measurements with time stamps. Inputs measure voltages, currents, and temperature sensors at high resolution via 24-bit ADCs. Sampling rates reach up to 50 measurements/sec/channel. Read More

Sensors, Monitors & Transducers, HVAC, Test & Measuring Instruments

Foil Strain Gage Diaphragm Sensors offer resistance to 5 kOhm.

November 2, 2015

Available in various sizes and tab configurations, Advanced Sensors strain gages can be installed using automated pick-and-place technologies. Design offers optimized grid-to-grid temperature matching, various pattern selections, resistances to 5 kΩ with tight tolerance of ±0.2% per grid, and grid lengths down to 0.5 mm. Latter increases output, because active portion of grid is better matched to peak strain areas on diaphragm.
Read More

Test & Measuring Instruments

Portable Circular Chart Recorders come in Pelican case.

November 2, 2015

Available with any combination of up to 3 pressure (10 in. of water up to 30,000 psi) or temperature (0 to +1,100°F) systems, Portable Pressure and Temperature Recorders come in Pelican™ cases with plexiglass window or solid door and pressure equalization valve. Watertight, crushproof, dustproof enclosure also features heavy-duty deflector ribs and stainless steel padlock protectors. Feet are adjustable for placement on uneven surfaces and rubberized to prevent slippage. Read More

Test & Measuring Instruments

Temperature Measurement Instrument accepts variety of sensors.

November 2, 2015

Supporting thermal evaluation and testing applications, self-contained Model TMM-100 has 8 channels for measuring diode voltage used in temperature measurements as well as 2 integrated Type-T thermocouple measurement circuits and two 10 KΩ NTC thermistor measurement circuits. USB-connected instrument is supplied with Windows™ 7, 8, and 10 compatible software that provides for sensor measurement on cyclic basis and for data logging of all measured values. Read More

Sensors, Monitors & Transducers, Optics & Photonics, Vision Systems, Test & Measuring Instruments

Temperature Monitoring System supports wallboard production.

October 28, 2015

Featuring dustproof, Ethernet-enabled design, TIP900 Non-Contact Infrared System creates highly detailed thermal images of wallboards as they leave dryer. Analyzing these, software detects moisture and density variations and identifies any faults. Thermal images and any flaws are instantly displayed on touchscreen, allowing line operator to adjust dryer for maximum board quality. Tolerances for rejects, alarm settings, and report generation are user-configurable. Read More

Test & Measuring Instruments

Temperature Data Logger features USB connectivity.

October 15, 2015

Utilizing thermistor technology, edl-USB™ is suitable for monitoring temperatures down to -40°F in stationary applications without probe. Palm-sized, laboratory-grade unit offers accuracy to ±0.1°C, provides 32 K memory, and is traceable to NIST standards. Users can simultaneously view up to 16 temperature profiles and download data without stopping original program. Should temperature reach levels outside user-programmed limits, onboard red LED will light until reset by user. Read More

Test & Measuring Instruments, Automatic ID, Labels, Tags, Signage & Equipment

RFID Data Loggers ensure cold chain validation.

October 8, 2015

With temperature range of -40 to +70°C, Easy2log© RFID Temperature Data Loggers offer temperature monitoring solution that allows users to track and trace food and beverage products for complete cold chain validation. IP67-rated loggers can each store up to 8,000 samples in internal memory. Using EPC C1G2 RFID interface, semi-passive tags have read range of 10 m in air (2.5 m on metal) at 2W ERP, allowing them to automatically read temperature data without opening product boxes. Read More

Electrical Equipment & Systems, Optics & Photonics, Sensors, Monitors & Transducers, Test & Measuring Instruments, HVAC

Temperature Transmitter targets functional safety products.

October 8, 2015

Intended for Safety Instrumented Systems (SIS), STZ Functional Safety Smart HART Temperature Transmitter conforms with IEC 61508:2010 for safety-related applications and provides dual sensor input that reduces process interruptions. Backup and fail-over protection allows either sensors or inputs to be designated as primary measurement; secondary input acts as backup. Also, dual sensor input allows for Average and Differential measurements along with High-Select and Low-Select options. Read More

HVAC, Test & Measuring Instruments

High-Temperature Ratio Pyrometers offer 150:1 resolution.

October 7, 2015

Designed to meet demands of harsh industrial environments, Endurance™ Series enables continuous visual process monitoring. Multiple lens, sighting, and focus options are available for different mounting distance and sighting needs. Operating with either Power over Ethernet or DC power, units feature galvanically isolated inputs/outputs as well as IP65-rated stainless steel housing able to withstand ambient temperatures up to 149°F, or up to 600°F using cooling accessories. Read More

Test & Measuring Instruments

Wireless Temp/RH Datalogger facilitates remote monitoring.

October 6, 2015

Designed for areas with limited access, Onset HOBO MX1101 measures and transmits environmental data (temperature/RH data) wirelessly to mobile device via Bluetooth Low Energy (BLE) technology. Self-contained unit works with HOBOmobile® app, which is available for iOS or Android and facilitates configuration and management. Solution offers real-time visual and audible high and low alarm thresholds, and data can be downloaded from up to 100 ft away. Read More

Test & Measuring Instruments

USB Temperature/Humidity Datalogger is 21-CFR Part 11 compliant.

September 23, 2015

With -31 to +176°F and 0%–100% RH measurement ranges, Lascar EL-21CFR-2-LCD stores 16,000+ temperature and humidity readings at resolution of 1°F and 0.5% RH. Data, including calculated dew point, can be graphed, printed, and exported for detailed analysis, and encrypted data has full audit tracking to comply with the requirements of 21CFR Part 11. In addition to LCD with 2 ½-digit display function, features include immediate, delayed, and push-to-start logging; and EasyLog 21CFR software. Read More

Test & Measuring Instruments, HVAC, Sensors, Monitors & Transducers

IR Thermometer offers real-time video capability.

September 22, 2015

With temperature range of 122–3,272°F utilizing short wavelength of 2.3 μm, PSC-SSS-Laser-3M-Video is suited for non-contact temperature measurement of metals. Sensor and software allow storage and instant integration of images into graphs that can be retrieved for later evaluation. With adjustable manual focus optics from 200 mm to infinity, close focus optics from 90–250 mm, and video and crosshair sighting for pinpointing targets as small as 0.020 in., sensor has response time from 1 ms. Read More

Test & Measuring Instruments

Portable Dataloggers record temperature and temperature/RH.

September 11, 2015

Respectively capable of logging temperature and temperature/relative humidity (RH) data, battery-operated OM-91 and OM-92 measure temperature to accuracy of ±0.3°C over 5 to 60°C range and ±2.0°C over full -30 to 80°C range. RH is measured to accuracy of ±3.0% RH over 20%–80% range and ±5.0% RH over 0%–100% range. Features immediate, delayed, or pushbutton start; real-time mode; user-configurable High and Low alarms; and USB interface for data transfer. Logging rate is software selectable. Read More

Controls & Controllers, HVAC, Test & Measuring Instruments, Health, Medical and Dental Supplies & Equipment

Homeothermic Monitoring System targets small rodents.

August 20, 2015

Offering closed loop temperature control, Homeothermic Monitoring System utilizes small, flexible rectal probe to monitor animal's core temperature and heating pad to provide heat input. LCD touchscreen allows user to set target temperature and clearly view subject’s current core body temperature as well as set temperature at all times. If animal’s core body temperature deviates 2° from set temperature, audible alarms advise user. Read More

Test & Measuring Instruments

Data Loggers record temperature and relative humidity.

August 11, 2015

Featuring portable, battery-operated design, OM-91 logs temperature, while OM-92 logs both temperature and RH. Temperature is measured to accuracy of ±0.3°C over 5–60°C range and ±2.0°C over full range of -30 to 80°C. Relative humidity is measured to accuracy of ±3.0% RH over 20–80% range and ±5.0% RH over 0–100% range. Suited for transportation applications, loggers feature user-configurable high/low alarms, LED status indicators, USB interface, and immediate, delayed, or pushbutton start. Read More

Test & Measuring Instruments

Dual-Channel Temperature Datalogger supports automated collection.

August 5, 2015

Via Ethernet LAN connection, TR-71nw supports automated, error-free data collection; remote monitoring; and alerting. Measurement range is -40 to +110°C with supplied sensor or -60 to +155°C with optional fluoropolymer-coated sensor, and resolution is 0.1°C. Along with 2 channel temperature monitoring, features include Web-based alert emails, support for Web-based and local data archiving, and automatic uploads to WebStorage Service. Power can be provided via PoE or 2 AA batteries. Read More

Test & Measuring Instruments

Data Loggers feature wired LAN connection.

July 31, 2015

Designed to provide temperature and humidity measurement, 2-channel TR-7nw Series Thermo Recorders have wired LAN connection and ability to upload data automatically to cloud storage service. Using Access Point mode, users can view recorded data directly from smartphones and tablets without network. Loggers operate from one AA alkaline battery and offer direct data download via USB. Applications include cold chain temperature monitoring, environmental monitoring, and life science/laboratory uses. Read More

HVAC, Test & Measuring Instruments, Sensors, Monitors & Transducers

Pyrometer System supports multi-point temperature monitoring.

July 15, 2015

Utilizing miniature, non-contact infrared sensors and interface modules, PyroMiniBus measures surface temperature of products and machinery in industrial processes and sends measurements via RS485 Modbus to touchscreen display. System offers choice of two temperature sensors for measuring small or large targets, 6-channel touchscreen for configuration and data logging, and junction box to connect them together. Sensors can operate in conditions up to 120°C with no need for cooling. Read More