Electrical Testers

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Test & Measuring Instruments

Legrand® Showcases Game-Changing Contractor Productivity and Risk Management Solutions at Neca 2013

Oct 07, 2013

WEST HARTFORD, Conn. – At this year's NECA show, Legrand, a leading provider of electrical wiring devices and home systems, will be showcasing game-changing solutions that enhance contractor productivity and facilitate job-site risk management.  To learn and see more, visit Legrand in booth #567 from October 12 – October 15, 2013, at the Walter E. Washington Convention Center in... Read More

Electrical Equipment & Systems, Green & Clean, Sensors Monitors & Transducers, Test & Measuring Instruments

Battery Charge/Discharge Test System comes in 40 V model.

Oct 03, 2013

Model 9200-4904 comprises independent 12 kW DC power modules that enable testing of smaller batteries, each with different test plan, power level, and start/stop times. Alternatively, higher-power battery can be tested by connecting power modules in parallel. GUI touch panel lets operator create, run, monitor, chart, and report unit under test profiles without writing any code. Along... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Cable Tester includes report management system.

Sep 30, 2013

Suitable for CEDIA custom install market, Cable Prowler™ provides full cable testing on any category network, coax, or telephone cable, combining length measurement using TDR technology, with ability to identify link capability and current link status. Unit displays wire map, numbered ID remotes, and any faults. Equipped with full color display and internal memory, tester also detects... Read More

Test & Measuring Instruments

ECT to Bring Compliant Connector Solutions to SMTAI 2013

Sep 19, 2013

Pomona, Calif. – Everett Charles Technologies' (ECT) today announced that it will exhibit in booth #436 at the upcoming SMTA International Exhibition, scheduled to take place October 15-16, 2013 at the Fort Worth Convention Center in Texas. Innovative solutions to be featured at the show will include: Tilt Universal Grid Prober – The tilt technology is the world's most advanced fixture... Read More

Test & Measuring Instruments

Clamp-On Resistance Testers help prevent rise in voltage.

Sep 19, 2013

Safety rated to CAT IV 600 V, DET14C and DET24C help prevent rise in voltage caused by fault current, surges, and lightning strikes in earth/ground systems. Interlocking teeth promote reliability, while flat core ends help prevent dirt build up and ensure measurement integrity. Able to measure ground resistance from 0.05–1,500Â Ω and true RMS ground leakage current up to 35 A,... Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

Charge Plate Analyzer offers one-button operation.

Sep 19, 2013

Featuring high-contrast LED display, Model 300 is used for checking effectiveness of bench-top, room, and overhead ionization-type static control systems and demonstrating charge presence. It measures, displays, and stores test data, including discharge times, peak offset voltages, and average offset voltage. Single-button operation supports manual +decay, -decay, and balance tests or automated... Read More

Computer Hardware & Peripherals, Services, Software, Test & Measuring Instruments

GOEPEL Electronic and iSYSTEM Develop Integrated Platform for Software and Hardware Validation and Test

Sep 13, 2013

At the 2013 International Test Conference, GOEPEL electronic, world-class Boundary Scan vendor and iSYSTEM, innovative tool provider for embedded software design announce the market introduction of another new development within the framework of a long-term strategic cooperation for Embedded System Access (ESA) technologies. The innovation named iTIC seamlessly integrates a complete on-chip... Read More

Computer Hardware & Peripherals, Electrical Equipment & Systems, Electronic Components & Devices, Sensors Monitors & Transducers, Software, Test & Measuring Instruments

Agilent Technologies to Demonstrate Leading-Edge Test Solutions for Memory, NVM Express, PCI Express, and SuperSpeed USB Applications at Intel Developer Forum

Sep 13, 2013

SANTA CLARA, Calif. – Agilent Technologies Inc. (NYSE: A) today announced that it will demonstrate its latest test solutions that meet the challenges of current and next-generation digital designs in memory, NVM Express, PCI Express, and SuperSpeed USB technology at the Intel Developer Forum, Sept. 10-12, at the Moscone Convention Center in San Francisco. Memory Debug and Validation Agilent... Read More

Electrical Equipment & Systems, Test & Measuring Instruments

Bender Provides The BELLAGIO HOTEL in LAS VEGAS, NV with LIFEGUARD Ground Fault Circuit Interrupters

Sep 13, 2013

BENDER provided 440 UL-Listed (UL943 - Class A) LIFEGUARD Ground Fault Circuit Interrupters for single and three-phase AC systems with variable frequency drives to the BELLAGIO Hotel in Las Vegas, NV. These state-of-the-art GFCIs are capable of detecting ground faults on AC and DC single and three-phase systems including systems with variable frequency drives. They will be used to monitor the... Read More

Software, Test & Measuring Instruments

Hierarchical System accelerates silicon testing of SoCs.

Sep 12, 2013

Offering automated solution for testing analog/mixed-signal IP, digital logic blocks, memory, and interface IP, DesignWare® STAR Hierarchical System creates user-configurable IEEE 1500 interfaces in RTL for each IP and logic block in SoC and integrates them with top-level control module or server while maintaining standard interface at every design hierarchy level. Automatic creation of... Read More

Software, Test & Measuring Instruments

ASSET ScanWorks Demonstrates Compatibility with New IJTAG Standard for Embedded Instruments

Sep 11, 2013

Anaheim, CA – International Test Conference, Booth 110 – Full compatibility with the soon-to-be-ratified IEEE P1687 Internal JTAG (IJTAG) standard for ASSET® InterTech's ScanWorks® platform for embedded instruments will mean that developers and test engineers will have a powerful suite of IJTAG tools to ensure the standard's rapid adoption in the industry. ASSET (Read More

Test & Measuring Instruments

Circuit Testers support diverse range of technologies.

Sep 10, 2013

Comprising V8, M4, L4, and H4 testers, Pilot 4D integrates hardware and software capabilities suited for testing miniaturized circuits with high component density. Design ensures accessibility, even to hard-to reach nets, and leaves no visible marks on tested circuit. Offered with VIVA v3.0 software, solutions enable application of multiple test and inspection techniques. Platform... Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Test & Measuring Instruments

Teseq Expands CDN Line to Include Testing of USB 3.0, HDMI Cables, Coaxial Cables, and 8-Line Unshielded Cables

Sep 09, 2013

New CDNs in compliance with IEC/EN 61000-4-6 Edison, N.J. – Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, has expanded its extensive line of over 60 CDNs (coupling/decoupling networks) for EMC RF conducted immunity testing, according to IEC/EN 61000-4-6, with several new models.  The latest models include CDN USB 3.0, CDN HDMI,... Read More

Software, Test & Measuring Instruments

SiliconAid Solutions, PLX Technology Partner on IEEE P1687-, IEEE 1149.1-2013-Based Test Development

Sep 09, 2013

AUSTIN, Texas – SiliconAid Solutions (http://www.siliconaid.com/), a privately held corporation and leader in chip-focused IEEE JTAG solutions and design for test (DFT) services, and PLX Technology, Inc. (http://www.plxtech.com.com), the global leader in PCI Express® (PCIe®) silicon and software connectivity... Read More

Test & Measuring Instruments

Digital Ohmmeters provide micro ohm measurements.

Aug 23, 2013

For repetitive testing applications such as manufacturing production line use, fully automatic Models DLRO10 and DLRO10X can be powered from mains/line power supply using DLRO10PLU in place of standard battery pack. Both can measure resistance from 0.1 嵽 to 2,000 Ω on 1 of 7 ranges and are protected to 600 V. Model DLRO10HD, measuring up to 250 嵽 at 10 A or 2.5 Ω at 1 A, is suited for... Read More

Display & Presentation Equipment, Electrical Equipment & Systems, Electronic Components & Devices, Sensors Monitors & Transducers, Test & Measuring Instruments

First SMD UVTOP® LEDs Roll off Sensor Electronic Technology's New High Volume Production Line, New Pricing Structure Announced

Aug 22, 2013

New volume pricing offered, making UVTOP LEDs commercially viable in consumer type applications. Columbia, SC – Sensor Electronic Technology, Inc. (www.s-et.com) today announced that it has completed product qualification and shipped the first SMD packaged UVTOP® devices from its new high volume manufacturing line. This milestone is the result of the... Read More

Controls & Controllers, Sensors Monitors & Transducers, Test & Measuring Instruments

Cooper Instruments & Systems Introduces the Model 7i Advanced Force/Torque Indicator

Aug 21, 2013

Warrenton, VA Cooper Instruments Systems announced on Wednesday that they will add the new Model 7i Advanced Force/Torque Indicator to their line of Electronic Force Gauges. Cooper has been a long-time distributor of Mark-10 products, the manufacturer of the Model 7i. Cooper Instruments’ President, Rex Cooper, says “Mark-10 has introduced a great new gauge that will serve the needs of many of... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Auto Ranging Multimeter features waterproof case.

Aug 20, 2013

Designed for verifying and troubleshooting electrical circuits, Model MM500 measures up to 750 Vac/Vdc as well as resistance and continuity. Unit features totally sealed IP67-rated dust and waterproof case, 10 ft drop protection, and CAT IV 600 V safety rating. Meter offers 3-button functionality, detects AC or DC voltage automatically, and includes both visual and audible continuity... Read More

Communication Systems & Equipment, Test & Measuring Instruments

Source Measure Unit features interactive touchscreen display.

Aug 20, 2013

Featuring 5 in. color  touchscreen and icon-based control, Model 2450 SourceMeter® SMU combines functionality of power supply, true current source, 6 ½ digit multimeter, electronic load, and trigger controller in half-rack unit, providing capabilities of I-V systems, curve tracers, and semiconductor analyzers. Unit features low current (100 nA, 10 nA) and voltage (20 mV) ranges as... Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Testing Kit allows remote cable diagnostics.

Aug 16, 2013

By eliminating need to walk back and forth to test sites, Smart Remote Kit for VDV MapMaster™ v2.0 voice, data, and video tester helps installers and technicians make efficient use of time. This kit, when combined with T129 VDV MapMaster v2.0, can be used to test and map/ID up to 8 drops/locations simultaneously. Remotes 2–8 work on UTP/STP cables (remote no. 1 is included with VDV MapMaster... Read More