Optek Technology, Inc.
Carrollton, TX 75006-6905
Nov 06, 2007 Available with axial, gull wing, or right angle lead configurations, Series OPB609 sensors consist of 940 nm infrared LED that has maximum forward voltage of 1.7 V and reverse dc voltage of 5 V and NPN silicon phototransistor mounted side-by-side on parallel axes. Units feature 50 mA forward dc current with maximum reverse current of 10 µA and peak forward current of 1 A, 75 mW power dissipation rating, and -25 to +85°C operating temperature range.

ifm efector, Inc.
Exton, PA 19341
Aug 06, 2007 Suited for production control applications, efector dualis object sensor detects and compares defined shapes and provides up to 5 configurable outputs. Compact 24 Vdc sensor measures 42 x 45 x 54 mm and incorporates 640 x 480 CMOS image processor, image sensor, evaluation electronics, LED display, and infrared LED lighting in die-cast housing. It uses industrial M12 cable assembly for electrical connection and Ethernet cable for software connection.

Rense Instruments
Danbury, CT 06810
Jun 26, 2007 Intended for applications up to 300°F where 5/16 in. diameter stainless steel probe is required, Model HT-748 offers 0-1 Vdc output corresponding to 0-100% RH, as well as separate 0-1 Vdc temperature signal. Unit is available with straight probe, or with 1/8 in. NPT thread or flange for mounting. Remotely mounted in DB25 Sub-D connector at end of cable, electronics are accessible, allowing for recalibration of sensor when required.

PAR Technology Corp.
New Hartford, NY 13413
Jun 21, 2007 To address need for safe food handling practices among restaurant operators, iQuality(TM) delivers proactive support and enterprise control of HACCP programs. Combination of software, temperature probe, and waterproof handheld device automate capture of checklist data and transmit it to enterprise database. Restaurants can collect critical food safety information across business, streamline regulatory reporting, and reinforce best practices when unsafe conditions are detected.

PerkinElmer, Inc., Optoelectronics Headquarters
Fremont, CA 94538-3180
Jun 12, 2007 Featuring quad-element design, triple-channel DigiPyro(TM) PYQ 2898 has 2 pairs of elements representing 2 channels and additional temperature reference channel. Housed in 3-pin TO-5 package, unit offers 42-bit output direct link. It can be utilized in range of home and industrial motion detection applications including intrusion alarms, motion-activated light switches, and door openers.

Trident Systems Incorporated
Fairfax, VA 22030
May 30, 2007 Sentry Node is designed to meet hand-emplaced unattended sensor needs for tactical C4ISR and force protection requirements. While node's organic passive infrared sensors can be used in trip-wire mode for detection and warning functions, node can also relay data for external seismic, acoustic, or imagery sensors. Solution features active GPS, integrated anti-tamper, and encryption features; sets up in as little as 5 min; and is sensor- and Common Operational Picture-agnostic.

KTA-Tator, Inc.
Pittsburgh, PA 15275
May 02, 2007 When inserted into concrete slab, Rapid RH(TM) allows flooring professionals and inspectors to acquire floor moisture and temperature readings. Disposable unit combines moisture sensor, power supply, and display in one device that can be left in testing area. Product fits level with testing area, preventing damage to probe, and offers pushbutton operation. Available kit includes 5 probes, 2 custom drill bits, cleaning brush, and proline concrete C575 moisture meter.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Mar 30, 2007 ILA Series Infrared Temperature Sensor features 2-wire signal compatible with almost any indicator, controller, recorder, or data logger. Providing linear 4-20 mA, 0-5 Vdc, or thermocouple output, non-contact sensor is suited for materials such as food, paper, textiles, plastics, leather, tobacco, pharmaceuticals, chemicals, rubber, coal, and asphalt.

Van Putten Instruments BV
  Netherlands
Mar 20, 2007 Utilizing 300, 400, or 600 mm long probe, VPFlowScope simultaneously measures mass flow from 80-150 mn/s, temperature up to 60°C, and pressure from 0-16 bar. Blue LCD display provides real-time information on all 3 parameters, while built-in datalogger enables user to store data. Mounted in pipe via 0.5 in. compression fitting, instrument provides 4-20 mA and RS485 outputs with accuracy of 2% of reading.

DeltaTRAK
Pleasanton, CA 94566
Feb 21, 2007 Exceeding specifications required for commercial and industrial use, FlashCheck® 11001 Pocket Probe Thermometer is IP56-waterproof rated with dual-scale, 1.5 x 0.5 in. LCD display. Smooth membrane surface and Touch-Pad(TM) seals against water, dirt, grease, and other intrusions. Magnet attaches thermometer to vent, allowing hands-free measurement of air temperature. RoHS-compliant and NIST traceable, unit includes pocket clip with integrated screwdriver for field calibration.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Feb 12, 2007 Covering bandwidth of 30-455 kHz, Model TSOP98200 features photo diode and wide-band amplifier mounted within 3-pin epoxy-encapsulated module with integrated semi-cylindrical lens. Device is ac-coupled to prevent activation from constant light sources such as tungsten bulbs or sunlight. Specified for operation with supply voltages from 2.7-5.5 V, sensor provides TTL- and CMOS-compatible output that can be directly connected to digital circuitry.

Avago Technologies
San Jose, CA 95131
Feb 01, 2007 Incorporating AlGaAs/GaAs LED technology, ASDL Series of IR emitters and detectors operate at wavelengths of 870 and 940 nm and are available in T1, T13/4, and Side Look packaging. Units are suited for smoke detectors, IR spotlights for cameras, and remote control devices. Combining infrared LED and phototransistor in integrated module, APDS-91xx Series reflective proximity sensors provide detection range of 8-12 mm and are intended for high-speed, non-contact switching applications.

Hart Scientific, Inc.
American Fork, UT 84003 9775
Jan 24, 2007 Secondary reference thermistor, model 5611T Teflon® Probe, offers flexibility, length, and chemical resistance needed in bio-pharmaceutical and other industries with harsh chemical environments. Teflon-encapsulated tip, thickest part of thermistor, measures 3 mm in diameter. Its flexible 4-wire lead is Teflon-insulated and extends another 6 m. Calibration and construction allow ±0.01°C uncertainty readings to be taken in deep or shallow immersion.

Thermo Electron Corp.
Waltham, MA 02454
Jan 12, 2007 At less than 3 mm in diameter, ROSS Micro pH Electrode (Model 8220BNWP) can be used with Orion PerpHecT® meters to enable measurement of pH while allowing for direct temperature measurement and compensation without separate ATC probe. Used independently or in conjunction with Orion meters, Micro Automatic Temperature Compensation Probe (Model 928007MD) features SS sensing tip measuring less than 1 mm in diameter, allowing users to obtain temperature of samples as small as 10 µL.

Control Co.
Houston, TX 77258 8307
Jan 05, 2007 With range of -99.9 to 199.9°C and 0.1° resolution, Traceable® -100.0 RTD Platinum Freezer Thermometer is suitable for monitoring temperatures in freezers, water baths, heating blocks, incubators, and refrigerators. Ten foot micro-cable permits freezer doors to close on it without affecting seal. Operating on 9 V battery, thermometer is supplied with 100 W triple-purpose platinum probe for liquids, air/gas, and frozen material.

DeltaTRAK
Pleasanton, CA 94566
Dec 14, 2006 Featuring 1.5 x 0.5 in. LCD display, Flash Check® Pocket Probe Thermometer Model 11000 provides quality control temperature checking of food and non-food items. Small diameter probe is suitable for checking temperature of thin masses of food such as hamburger patties and chicken/fish fillets as recommended by FDA Food Code 4-302.12(B). Pocket-size, RoHS-compliant unit features IP67-rated waterproofing and comes with removable pocket clip with integrated calibration screwdriver.

E-Control Systems, Inc.
Chatsworth, CA 91311
Dec 11, 2006 IntelliProbe(TM) Wireless Temperature Probe features iButton(TM) reader at base for reading iButton(TM) data tags on inspection stations, which automatically brings up checklist or schedule. Bluetooth device combines with IntelliCheck(TM), which stores data in secure central location for retrieval from any computer on network. Sent over Ethernet or WiFi, data can be viewed on web browser, and alerts generated by system are sent over e-mail, cell phones, or pagers.

E-Control Systems, Inc.
Chatsworth, CA 91311
Nov 27, 2006 Handheld IntelliCheck(TM) PDA is used to take product temperature readings as well as manage and deploy HACCP inspection programs for Food Service Industry. System includes integrated corrective action system that ensures operators fix problems as soon as they are detected. Bluetooth-enabled IntelliProbe(TM) Wireless Temperature Probe features iButton(TM) reader at base for reading iButton data tags. All data is automatically uploaded to central server.

MSA
Pittsburgh, PA 15230 0426
Nov 22, 2006 ORION®plus Detector combines features of ORION® Multigas Detector with range of infrared and toxic sensor options. Infrared sensor delivers stable readings in environments with challenging temperature and humidity effects. Providing one-hand operation, detector offers standard datalogging, internal pump, and rechargeable NiMH or disposable alkaline battery packs.

Exergen Corp.
Watertown, MA 02472
Apr 05, 2006 Combining IR temperature sensor with Smart microprocessor, Smart-microIRt/c offers 4 different sensor heads. Outputs include 4-20 mA, 0-5 V, 0-10 V, and RS232, and temperature ranges are -30 to 70°C, 0-100°C, 0-250°C, and 0-500°C. Powered from 12 or 24 Vdc, sensor features stainless steel head, hermetically sealed with NEMA 4X rating. While performing complex algorithms determining output, Smart processor calibrates itself once/sec, eliminating drift or sudden changes.