Honeywell International    Freehold, NJ 07728
May 25, 2012 Experion® MX Quality Control System (QCS) is capable of making Transmission Infrared (TRIR) Fiber Weight and Moisture Measurements via sensor that simplifies overall operations in tissue production industry. Sensor provides measurement of both dry weight and moisture while decreasing sensitivity to environmental factors such as temperature and head alignment. Solution can also be retrofitted to replace older systems containing nuclear source betagauges.

ThermoWorks    Lindon, UT 84042
May 24, 2012 With BlueTherm(TM), users can measure, record, and download temperature data to HACCP and food safety compliance systems with Bluetooth-enabled device, eliminating need for paper logs. Unit utilizes type K thermocouple with temperature range of -58 to 572°F and reach up to 65 ft. Readings are displayed in 4 seconds with accuracy to ±0.7°F. Equipped with dual LED for power status and communication transfer, probe uses HACCP-Mobile(TM) software for Windows®, which syncs with iPhone and Android.

National Instruments Corp.    Austin, TX 78759-3504
May 09, 2012 With full support on LabVIEW Real-Time, NI PXIe-4357 resistance temperature detector (RTD) module is optimized for temperature measurements with Pt100 RTD sensors for thermal monitoring applications. Module integrates sensor-specific signal conditioning with 24-bit delta-sigma ADCs with antialiasing and low-pass filters to sample all 20 channels at 100 S/s/ch and offers typical accuracies of up to 0.09°C. Additional modules can be added to systems to add complementary sensor inputs.

Electronic Development Laboratories, Inc.    Danville, VA 24540
Apr 16, 2012 Providing instantaneous readings in 5° increments, KIT-EZK-CR E-Z Probe Pyrometer Kit includes LCD with backlight, input jacks on top and bottom, belt clip and sensor holder for access and storage, and ability to switch between °F and °C. Also included is Reinforced Fine Hypodermic Sharp Needle sensor specifically for tire and rubber industry, and both low battery and open sensor indicators.

Tel-Tru Mfg. Co., Inc.    Rochester, NY 14605
Feb 10, 2012 Integrating thin film PT100 platinum RTD sensing element and programmable microprocessor-based transmitters in all-welded 316L SS housing, RTD Probe Assemblies eliminate chance of wiring disconnections between transmitter and sensor. Probes are available in .187 and .250 in. diameters with choice of lengths ranging up to 12 in. Protected against vibration, shock, and moisture, probes feature -103 to 392°F range, which can be scaled in field or at factory to all common requirements.

Maxim Integrated Products    Sunnyvale, CA 94086
Jan 09, 2012 Housed in 2 x 2 x 0.6 mm package, Model MAX44000 combines digital ambient-light and infrared proximity sensors. Device consumes 5 µA when ambient sensor is enabled, and 7 µA when both sensors are activated, extending application's battery life. BiCMOS technology enables integration of 2 photodiodes and optical filter to reject UV and IR light, enabling IC to replicate optical response of human eye. Applications include smartphones, portable devices, industrial sensors, and presence detection.

Control Co.    Houston, TX 77258 8307
Dec 30, 2011 Supplied in chemical-resistant ABS case, Traceable® RTD -100.0 Platinum Freezer Thermometer monitors temperatures in freezers, water baths, heating blocks, incubators, and refrigerators. Unit features temperature range of -99.9 to 199.9°C with 0.1° resolution and ±2°C accuracy. Measuring 1/8 x 5 in., 100 W RTD platinum probe operates with liquids, air/gas, and frozen material. Adjustable probe holder, Velcro®, and magnetic strips are provided for mounting.

Fire Fighting Enterprises    Corinth, TX 76210
Nov 21, 2011 In addition to wide open indoor spaces, FIRERAY 3000 is suited for situations where ceiling mounting is difficult, where line of sight for IR beam path is narrow, or where building structure uses reflective surfaces. Visible targeting laser housed in receiver head aids initial placement and setup. Both detector heads have integrated alignment thumbwheels for repeatable targeting adjustment, with up to 10° of motion available on horizontal and vertical axes.

Sierra Monitor Corp.    Milpitas, CA 95035 6825
Jun 29, 2011 Available with HART, 4-20 mA, Modbus RS-485, or Sentry bus interface options, Model 5100-28-IT is network enabled in order to communicate with any plant-wide control and monitoring system. Standalone module, FM approved for performance and area safety requirements, including Group B, integrates scrolling LED with magnet operated menu for display of gas status and non-intrusive calibration. Alarm relays may be supplemented by higher amperage control relays in same enclosure.

Melexis Inc.    Concord, NH 03301
Jun 29, 2011 Suited for automotive, medical, industrial, and consumer applications, MLX90614 series incorporates compensation technology that minimizes error induced by fast temperature variations and/or thermal gradients. Models MLX90614ESF-DCH/-DCI integrate refractive silicon lens to achieve fields of view down to 5°, enabling measurement of small objects. Able to measure human body temperature with accuracy of 0.2°C, plug-and-play sensors are factory calibrated and occupy TO-39 footprint.

Measurement Specialties, Inc.    Hampton, VA 23666
Jun 16, 2011 Operating over -40 to +125°C range, RoHS-compliant Boiler Probe with Integrated Connector contains NTC thermistor soldered to 2.5 mm connector. Brass housing provides British Standard Pipe Fitting (1/8 BSPF) to facilitate installation and replacement, and optional threads are available for custom designs. Typical resistance is 10,000 Ohms at 25°C, and ±1°C tolerance is held over 25 to 85°C range. Users can expect beta value of 3976K (25/85), with variance of ±1%.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Jun 09, 2011 With Model TMP006, manufacturers can accurately measure case temperature of mobile devices, such as smartphones, tablets, and notebooks. Sensor can also measure temperature outside device, extending features and user apps. Housed in 1.6 x 1.6 mm package, chip integrates MEMS thermopile sensor, signal conditioning, 16-bit ADC, local temperature sensor, and voltage references. Device supports temperature range of -40 to +125°C, while using 240 µA quiescent current and 1 µA in shutdown mode.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Jun 08, 2011 Measuring 4.7 x 4.7 x 2.4 mm, dual and quad type Models IRS-B210ST01, IRS-B340ST02, and IRS-B345ST03 offer optimum sensitivity and SNR and are stable against temperature changes. Units wake up consumer appliances, such as televisions, photo frames, or room lighting, from energy saving mode to normal operation once human movement has been detected. Model IRS-B345ST03 also has capability of detecting minor motion such as waving hand or head.

Omega Engineering, Inc.    Stamford, CT 06907
Jun 02, 2011 Combining remote IR sensor and radio wireless transmitter in weather-resistant NEMA 4X enclosure, Model UWIR-2-NEMA transmits process temperature, ambient temperature, signal strength, and battery status. Non-contact unit measures temperature from 0-1,000°F and features adjustable emissivity from .10-1.0. Included software converts user's PC into multi-channel chart recorder or data logger. To extend battery life, Model UWIR-2-NEMA includes sleep mode.

Cal Sensors, Inc.    Santa Rosa, CA 95403
Apr 26, 2011 With sensitivity of 1.5 x 10¹⁰ Jones in 1-5 µm wavelength region, Lead Selenide Position Detectors can identify and track location of infrared sources. Multi-channel format allows technology to zoom in on hot spots or other IR emissions, making detectors suitable for weapons targeting, security and defense counter-measures, and hot spot detection for fire fighting. Integrated software provides real-time streaming data on target position relative to detector location.

Omega Engineering, Inc.    Stamford, CT 06907
Mar 30, 2011 Intended for PC-based, non-contact temperature monitoring, IR-USB series features IR sensor/signal conditioner installation with direct USB connection. Included software converts PC into temperature meter, chart recorder, or data logger. Taking measurements from 0 to +1,000°F, sensor offers adjustable emissivity from 0.10-1.0. Typical applications include jobs where object to be measured is moving, is surrounded by EM field, or is contained in vacuum or other controlled atmosphere.

Cal Sensors, Inc.    Santa Rosa, CA 95403
Mar 22, 2011 LMA (Linear Multiplexed Array) series features 256-element array, comprised of 6 compensation elements and 250 active elements, that provides real-time measurement compensation for environmental changes. Available in PbS and PbSe material, 256-element array provides sensitivity in 1.0-5.5 µm wavelength region. Stability enhancing features include system noise reducing design, built-in shielding, and optional cooler controller. Rectangular and square configurations are available.

ROHM Semiconductor USA LLC    San Diego, CA 92121
Feb 01, 2011 Surface mount SIM-030/031ST and SIM-040/041ST IR LEDs feature wavelength technology that provides peak output of 850/870 nm, which is close to peak wave sensitivity of phototransistors, enabling high efficiency proximity sensing and energy savings. SIM-030/031ST measures 2.3 x 1.95 x 0.9 mm and with forward current of 100 mA delivers typical emission strength of 30 mW/sr, while SIM-040/041ST measures 3.1 x 2.25 x 1.6 mm and provides 40 mW/sr typical emission strength.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Jan 12, 2011 Along with integrated controller, thermoMETER CSlaser features double sighting laser that precisely follows IR optical path and marks real spot size at any distance. Smallest spot size of 0.05 mm (M2 version) is reached at crosspoint of both laser beams at 150 mm. While SF version (8-14 µm) has -50 to +975°C measuring range and 50:1 optical resolution, M-2 version (1.6 µm) measures temperatures from 385 to 1,600°C and has 300:1 optical resolution.

Micro-Epsilon UK Ltd    Cheshire   United Kingdom
Dec 13, 2010 Featuring integrated controller, thermoMETER CSlaser is available as 8-14 µm SF version with measuring range from -50 to 975°C for general tasks, and as 1.6 µm M-2 model with range of 385-1,600°C for applications in metalworking industry. Two-beam laser aiming feature marks actual spot size at any distance, eliminating faulty measurements on small objects. Capable of measuring at distances up to 150 mm, sensor has scalable 4-20 mA 2-wire analog output and alarm output.