Sound Probes

Related Categories
Fluid & Gas Flow Equipment, Test & Measuring Instruments

Pump Protection System is cUL, ATEX, and IECEx approved.

February 10, 2016

Using ultrasonic probe to monitor gas inside process fluid as it passes through sealless magnetic drive pump, VapourView provides early warning of incorrect priming, venting, cavitation, or entrained process gas. Warning signal is sent to process operator when ultrasonic probe detects presence of even minute gas levels — as low as 1% per volume. Operating from -40 to 356°F, system includes non-invasive detection sensor, flameproof electronics, onboard data recording, and local visual display. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments, Vision Systems

SuperSonic Imagine Receives FDA 510k Clearance for New Musculoskeletal and Vascular Ultrasound Probes

December 4, 2014

AIX-EN-PROVENCE, France — SuperSonic Imagine (Euronext: SSI, FR0010526814), a company specializing in ultrasound medical imaging, is pleased to announce it has received 510k clearance from the FDA for two new probes used with its ultrasound machine, the Aixplorer®. The first of these newly approved devices facilitates musculoskeletal and sports medicine diagnoses. The SHL20-6 probe, a... Read More

Test & Measuring Instruments

Phased Array Wheel Probe inspects composite materials.

July 15, 2014

Replacing full 2-D encoding systems, RollerFORM facilitates immersion-like ultrasonic testing of composites and other smooth-surfaced materials that are used in aerospace industry. Wheel tire is made from material that closely matches acoustic impedance of water, permitting efficient transmission of energy to part without unwanted echoes, and obtaining 1 mm near-surface resolution in composites when using 5 MHz probe model. For thicker materials, 3.5 MHz model is available. Read More

Test & Measuring Instruments

ProbeLogic Unveils New Smart3D Tester for Use with 3D Ultrasound Probes

April 3, 2014

ProbeLogic has released the Smart3D tester. This tester is the first of its kind in the world and is capable of fully testing and diagnosing mechanical 3D probes. On-board features also include many modes that allow for a much simpler repair process when repairing 3D transducers. “We have been using and testing the Smart3D at our Perth based ultrasound probe repair facility for the last 12... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments, Green & Clean

Oscilloscope Probes measure current or voltage signals.

July 11, 2013

Designed to fit any Rigol oscilloscope, current probes RP1003C/RP1004C/RP1005C measure higher speed transient currents up to 100 MHz when used with the RP1000P external power supply. Probes RP1001C/RP1002C enable direct measurements of currents up to 1 MHz or 100 A DC. Respectively intended for 25/50/100 MHz applications, RP1025D/RP1050D/RP1100D are passive, high voltage differential probes designed for voltage measurements up to thousands of Vpp.<br /> Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Phased Array Probes offer frequencies from 1-10 MHz.

November 10, 2006

Compatible with phased array flaw detection equipment, Phased Array Ultrasonic Immersion Transducers can be supplied in flat and curved configurations and can have 32, 64, or 128 computer-controlled elements. Single probe can perform inspection tasks that normally require large numbers of conventional probes or multiple scanning passes. Real-time, sector scan imaging of phased array provides integrated, cross-sectional visualization of any area or component under inspection. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Tank Monitoring System uses ultrasonic probe.

February 1, 2006

Basing tank level readings on real-time fluid levels, Model LFC electronically manages, maintains, and verifies product delivery and inventory. System automatically provides independent verification of amount delivered. Managing up to 16 ultrasonic tank gauge probes by tracing volumes and monitoring warning levels, system uses modem to link oil company to customers. Remote transfer of data is secured with site IDs, security codes, and keypad phone numbers. Read More

Communication Systems & Equipment, Computer Hardware & Peripherals, Sensors, Monitors & Transducers, Test & Measuring Instruments

Probes use ultrasound or radar to measure fill levels.

August 20, 2004

Two-conductor, Sitrans Probes LU and LR continually measure fill level of storage tanks and process vessels, as well as flow rate in open flumes. Interference echoes are automatically filtered out to ensure reliable analysis of echo signals. Ultransonic transceiver, Model LU offers 12 m measuring range in liquids and slurries, while radar level transmitter, Model LR operates at 5.8 GHz or in North America at 6.3 GHz with measuring range of 0.3-20 m. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Ultrasonic Probes have self-cleaning transducers.

March 22, 2002

Ultrasonic Probes, with 1, 1.5 and 2 NPT mountings, are insensitive to mountings and, with transceiver and smart signal processing, eliminate echos from tank walls, standpipes, and other buildups. Built-in communication with PC allows storage of current output and temperature in data logger. Probes connect to network using RS485 with company's protocol and Modbus RTU. Read More

  • 1