Agilent Technologies, Inc.
Palo Alto, CA 94304
Jan 08, 2004 Suited for double data rate 2, synchronous dynamic random access memory buses, Agilent FSI-60075 DDR2 memory-bus analysis probe utilizes verticle, low-profile interposer design. Operating at full DDR2-533 speeds, probe can be inserted into target memory socket while accepting memory module in extender DIMM slot that supports all DIMM types. Straddle-mount DIMM slot and right-angle Samtec connectors help minimize electrical and mechanical intrusion.

Moody Tools, Inc.
East Greenwich, RI 02818 0230
Jan 07, 2004 Double Ended 25 mil Probes feature needle-sharp, stainless steel points combined with blue anodized aluminum for clean room use. Configurations include straight by double bend, single bend by triple bend, single bend by hook, and triple bend by hook.

Heidenhain Corp.
Schaumburg, IL 60173-5337
Oct 27, 2003 Model TS 640 3-D Trigger Probe features integrated blasting unit consisting of 3 nozzles at bottom of touch probe. Nozzles use blast of air or coolant to remove coarse contaminants from area being probed. Infrared LEDs and receiver modules for signal transmission are evenly arranged around circumference of probe, ensuring transmission in all directions of working plane. With 7 m area of transmission, unit is suited for use on large machines.

Dresser Instrument
Stratford, CT 06614-5145
Aug 22, 2003 The ebroâ„¢ FOM 200 consists of 316Ti stainless steel probe, and sensor comprised of gold and ceramics that measures polar parts in oil in range of 0% for fresh oil and up to 35% for used oil. Device can store several types of oils in memory. It has resolution of 1% and typical accuracy of ±5%. Oil measuring range is 68–428°F and oil temperature range is 284–392°F, typically used for deep-frying. Product comes in food-grade, ABS case rated to IP68.

PreCon National Sales Co.
Memphis, TN 38184
Aug 19, 2003 Series PL-PH utilizes corrosion-resistant brass or stainless steel housing with large wall thickness. In most applications, probe can be inserted directly into liquid being measured. Standard unit includes thermistor or RTD sensor elements and wide variety of resistance curves. Applications include pool and spa heaters, food and beverage equipment, surface transportation, analytical instruments, and building controls.

Agilent Technologies, Inc.
Palo Alto, CA 94304
Jun 13, 2003 InfiniiMax E2696A 6 GHz active differential probe allows users of spectrum and network analyzers to make high-impedance measurements on differential signals and quickly validate differential signal designs. It offers low 320 fF differential input capacitance for minimal reactive loading and disturbance of signals in system under test. Variable spacing and Z-axis compliant tips make it easy to probe differential signals on variety of target configurations.

Agilent Technologies, Inc.
Palo Alto, CA 94304
Jun 09, 2003 Model E5394A soft touch probe enables direct connection from probe to targets on PCB without use of adapter. In connectorless probing applications, array of probe pads are used for validating digital designs to help streamline design process. Single-ended, 34-channel probe is compatible with all Agilent logic analyzers that use 40-pin connector interface. Product uses micro spring-pin technology to enable reliable connection to probe pads.

Huntron Instruments, Inc.
Mill Creek, WA 98012
May 27, 2003 Huntron Access, when coupled with National Instrument's Labview, can integrate with general purpose ATE measuring equipment. Open-architectured, automated probing station delivers accuracy and performance of ProTrack probers with freedom to use additional general-purpose test equipment. It is suited for applications where circuit card is in powered up state.

Silvertronic USA
Windsor, CA 95492 8125
Mar 19, 2003 Fused Probes and Test Accessories, compliant with International Safety Standard IEC61010, utilize ceramic fuses rated up to 10 A located near probe tips. With performance ratings from 1,000 V CAT III and 600 V CAT IV to 300 V CAT III, design includes flexible double insulated silicone leads that resist corrosive chemicals. Deluxe Test Probe Kits include two probes and one pair of heavy-duty insulated alligator test clips, while standard kits include paired fused probes.

Thermo Electron Corp.
Waltham, MA 02454-9046
Feb 14, 2003 Dissolved Oxygen AUTO-STIR Probe works with Model 862A DO/BOD/Temperature Meter. Built-in stirrer provides vigorous sample agitation preventing oxygen stratification. Free standing probe stand functions as air calibration beaker and can store probe when not in use. Probe includes one-touch control, dual automatic temperature compensation, and low maintenance polarographic design.

Emerson Process Management
Knoxville, TN 37932
Dec 03, 2002 Züllig COSMOS-25 provides suspended solids measurements. Able to be used in open channels or basins and pipelines, its multi-beam technology renders product less vulnerable to measurement discrepancies.

Rosemount Analytical Inc. Process Analytic Division
Orrville, OH 44667
Apr 03, 2002 Direct Replacement Oxymitter(TM) flue gas oxygen probe operates on most existing electronics and cable. It features explosion-proof housing, vibration resistance, field repairability, and 95% less power consumption than traditional electronics. When existing electronics require replacement, integral Oxymitter electronics that offer HART(R) or FOUNDATION(TM) fieldbus communications can be added.