Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Jul 27, 2005 Featuring analog output, FieldMaxIIâ„¢ is available in power-only, energy-only, or power and energy configurations. Thermopile, pyroelectric, and semiconductor sensors enable unit to measure UV, visible, and IR laser output from nW to kW range, and to work with CW and pulsed lasers with repetition rates up to 300 Hz. LabVIEW Instrument driver and ActiveX DLL Server component facilitate development of custom testing routines and integration with other test equipment.

Mine Safety Appliances Co.
Pittsburgh, PA 15230
Jun 03, 2005 Hand-held Orion Plus IR Detector utilizes over 20 different sensors, including chemical, catalytic, and IR types. Functioning as personal monitor and pre-entry check device, unit detects combustible gases in atmospheric and inert applications. Backlit graphic display shows all gas readings at a glance, while text messages, LEDs, and audible alarm serve as additional alerts. Electrical Perma-Check function continuously controls built-in pump.

Spiricon, Inc.
Logan, UT 84341 5740
Jan 25, 2005 MPE-2500 universal, portable, dual channel meter interfaces to thermopile, pyroelectric, semiconductor, and temperature probes. Unit features digital readout, analog bar, and dynamic graphs on high-resolution backlit LCD screen. Interfaces include SD card slot for logging stability data and USB interface for remote virtual instrumentation via LabVIEW on Windows, Mac, and Linux. Probe selection includes 36 thermopile models, including 600 W air-cooled version.

MSA
Pittsburgh, PA 15230 0426
Oct 14, 2004 FlameGard® UV/IR Flame Detector detects UV and IR radiation emitted by hydrocarbon-fueled fires and responds by activating relay, which can be part of fire alarm loop or connected to digital control system. Enclosed in heavy duty, copper-free, explosionproof aluminum housing, unit provides stand-alone operation or can be connected to standard 4-wire fire control panels. Optional Air Purge Kit keeps viewing glass clear in dusty environments.

Ophir Optronics, Inc.
Danvers, MA 01923
Oct 12, 2004 Featuring conical probe design for maximum high damage threshold, Comet 10K-HD measures outputs from CO₂, YAG, and diode industrial laser sources. It provides absolute calibration accuracy of ±5% and repeatability of ±1% for same initial temperature. Linearity with power is ±2% from 1–10 kW. Equipped with swivel mount that rotates ±90°, Comet 10K-HD can measure laser using automatic or manual measurement mode.

Ophir Optronics, Inc.
Danvers, MA 01923
Sep 09, 2004 Model 30(150) A-SV volume-absorbing detector head measures beam power up to 30 W continuously and 150 W intermittently. It has 100 KW/cm² damage threshold for power density and 1 J/cm² damage threshold for energy density of nanosecond pulses. Spectral range is 0.19–12 µm, power range is 50 mW to 150 W, and energy range is 50 mJ to 200 J.

Ophir Optronics, Inc.
Danvers, MA 01923
Sep 09, 2004 Comet 1K Power Probe measures laser power from 20 W to 1 KW. Users set laser to 10 sec timed exposure, press ready button, and place probe in path of laser beam, where product senses temperature rise and measures it automatically. Specifications include 0.2–20 µm spectral range, ±5% absolute calibration accuracy, and ±1% repeatability for same initial temperature. Unit comes with 2x8 character LCD and swivel mount that rotates ±90°.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Mar 25, 2004 General-purpose FieldMaxâ„¢-TO and FieldMaxâ„¢-P, suited for field-service and production test applications, feature direct button-driven interface, smart-sensor compatibility, and backlit statistical display that shows mean, min, max, and standard deviation. FieldMax-P works with pyroelectric sensor for energy readings from nJ to J at repetition rates to 300 Hz. FieldMax-TO power meter works with thermopile or optical sensors for measurements from nW to kW.

Ophir Optronics, Inc.
Danvers, MA 01923
Feb 18, 2004 Compatible with thermal, pyroelectric, and photodiode heads, Nova II measures power or energy from pJ and pW to hundreds of Joules and thousands of Watts. It provides laser tuning, graphing, normalize, power or energy density units, attenuation scaling, and max/min limits. Unit offers non-volatile data storage of up to 50,000 points and includes USB and RS232 outputs. NIST traceable and CE marked, meter can be operated by battery or AC source.

Lambda Solutions, Inc.
Waltham, MA 02452
Dec 31, 2003 Model NIR-H is a 10 cm probe with gun-handle grip. Model NIR-HT includes gun-handle grip, built-in trigger, LEDs, and serial port interface for connection to computer. Model NIR-MB offers probe head lengths up to 30 cm and features torpedo-shaped barrel grip. All are stainless steel with sapphire windows and solvent-resistant fittings. Standard fiber length is 2 m. Probes interface with most existing FTIR, AOTF, and Dispersive Spectrometers.

Lambda Solutions, Inc.
Waltham, MA 02452
Oct 02, 2003 Model LSI-NIR-VT Near Infrared Vector Probe is for Diffuse Reflectance Spectroscopy and will interface with FTIR, AOTF and Dispersive Spectrometers. Design allows for low internal light reflection and high light collection efficiency ensuring high signal-to-noise characteristics. Probe is stainless steel, PVC and polyamide with 2 m cable. It is suited for process and quality control applications in chemical, agricultural, food, and pharmaceutical industries.

Ophir Optronics, Inc.
Danvers, MA 01923
Aug 22, 2003 Comet handheld, laser power probe provides absolute accuracy of ±5% at calibrated wavelengths. It is calibrated for CO₂, YAG, and Diode lasers with spectral range of 10.6 µm for CO₂ and 800-1064 nm for YAG type lasers. Linearity with power is ±2% from 1–10 kW. Probe handle swivels ±90° with regards to absorber head. Several measurements can be taken before probe needs to be cooled. LCD display in handle is 2 x 8 with 5 mm characters.

C Technologies Inc.
Cedar Knolls, NJ 07927
Jun 25, 2003 Versaprobe offers cuvette precision, is useable in virtually any solution, and eliminates carryover between measurements. Disposable quartz sleeve eliminates need for cleaning while permitting measurements down to UV range. Probe enables use of fiber optics with corrosive or difficult-to-clean samples encountered in biotech, petrochemical, lab, and medical diagnostic applications.

Ophir Optronics, Inc.
Danvers, MA 01923
May 02, 2003 Model PE50-DIF-U Pyroelectric head provides high damage threshold and repetition rate of millions of pulses with no change in calibration. Product measures pulse energy from 40 µJ to 10 J, up to 3,000 Hz. Linearity is specified at 1% for >10% FS, while max pulse width is 30 µs. Max pulse rate is 3,000 Hz, and calibration accuracy is ±3% at 308 nm. Average power (max) is 20 W with average power density (max) of 25 W/cm².

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Mar 05, 2003 Multi-kilowatt, water-cooled Models PM1K-100, PM3K-100, and PM5K-100, with 100 mm diameter surface area, and Model PM5K-200, with 200 mm diameter surface area, measure energy output of diode laser bars, large cross-section laser beams, diode laser arrays, and high-divergence laser beams. Probes measure output of lasers ranging from 0.19–11 µm with 1 W power resolution. Devices feature maximum average power density of 26 kW/cm² and maximum pulse energy density of 0.6 J/cm².

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Feb 27, 2003 LaserGage LG100 and LG500 are portable, microprocessor-controlled meters that exhibit ±3% accuracy and ±5% repeatability. Model LG100 features 10–100 W power range with 0.1 W resolution, while Model LG500 features 50–500 W range with 0.5 W resolution. Two line x 12 character display provides measurements. Meters can be set to automatically trigger to laser beam and self-time 5 sec power measurement. They are battery-operated and include AUTO-OFF feature.

Coherent Inc., Laser Group
Santa Clara, CA 95054-1112
Feb 24, 2003 MaxBlack laser energy probes, J25LP-MB and J45LP-MB, measure laser pulse energy from 200 µJ to 2J at rep rates to 1,000 pps from 0.19 to 11 µm. Probes perform at fluency levels up to 265 mJ/cm² at 1064 nm. Proprietary coating offers significant improvements over large-area, black-painted probes. Probes are more resistant to scratches and laser damage yet maintain features such as flat spectral response and low reflectance.

Directed Light, Inc.
San Jose, CA 95134
Feb 20, 2003 LaserPoint Fit 10 mW automatic, handheld power probe calculates laser power by microprocessor-based measurement of temperature dynamics and provides ±1% repeatability and ±3% accuracy. Two models are offered, covering multiple wavelengths with powers from 500 mW to 200 W. Multifunction LCD simultaneously displays power and wavelength of calibration. Two AA batteries provide enough power for more than 4000 measurements.

Ophir Optronics, Inc.
Danvers, MA 01923
Jan 28, 2003 Volume Absorbing Head, Model 30(150)A-HE-DIF offers average power measurements up to 30 W, continuous or 150 W, intermittent. Energy density rating is 5 J/cm² for 1064 nm, and max average power density is 500 W/cm². Unit provides 3 digital power scales of 3, 30, and 150 W and response time of 4 sec. Information is stored in EEPROM of absorber head and downloaded when display is attached and turned on, making all heads plug-and-play ready.

Ophir Optronics, Inc.
Danvers, MA 01923
Nov 21, 2002 Model PE50HD Pyroelectric head provides energy measurement of high-energy Excimer lasers. It is calibrated for 157 nm and 10.6 µm. Linearity is specified at 1% for 0–400 µS pulse widths, with pulse width measurement capability up to 1 mS. Energy scales include 10 J, 1 J, 100 mJ, and 10 mJ. Max pulse rate is 100 Hz, while calibration accuracy is ±3 % at 193 nm. Max average power is 15 W with max average power density of 10 W/cm².