EDAX, Inc.
Mahwah, NJ 07430
Sep 02, 2008 Genesis Apex system combines X-ray detector, digital pulse processing electronics, and Genesis 6 analytical software to generate solid foundation needed for accurate X-ray microanalysis. Digital pulse processor, DPP III, employs pulse pile-up to provide clean spectrum for analysis as well as processing times capable of handling over 1,000,000 cps. Employing physics and rules-based algorithm, EXpert ID provides element identification in one step.

Cecil Instruments Ltd
Cambridge   United Kingdom
Aug 27, 2008 Including quaternary and binary low pressure mixing pumps, Q-Adept HPLC systems can accommodate different low drift detectors such as variable wavelength UV/Visible, WaveQuest UV/Visible, electrochemical, refractive index, conductivity, and fluorescence, depending on analytical requirements. Space saving plug and play units incorporate PowerStream software that ensures 21 CFR part 11 compliance.

Paul N. Gardner Co., Inc.
Pompano Beach, FL 33060 6608
Aug 22, 2008 Designed to measure air temperature, surface temperature, and air humidity dew point, DewCheck IV calculates difference between surface and dew point temperature, indicating optimum climate conditions for painting. All parameters, including time and date, are stored in memory and can be retrieved at later time. Suitable for 1-hand operation, instrument includes illuminated graphic display, menu-driven interface, acoustic and visual alarms, and automatic trend indicator.

Xilinx, Inc.
San Jose, CA 95124 3400
Aug 22, 2008 With Embedded Development HW/SW Kit, hardware and software designers can architect, develop, and debug embedded processing systems based on PowerPC® 440 and MicroBlaze(TM) Processors. In addition to Xilinx Platform Studio and ISE® Design Suite design environments, kit includes Virtex-5 FX70T FPGA development board, Model ML507, to accelerate system design; Linux reference designs; library of processing IP cores; and USB JTAG download/debug cable.

Measurement Specialties, Inc.
Hampton, VA 23666
Aug 21, 2008 Available in rugged stainless steel package for stud mounting, Model 4801A offers amplified signal conditioned output in ranges from ±2 to ±500 g, and features ASIC that offers temperature compensation from -55 to +125°C. MEMS sensing element is gas dampened for optimum frequency response and includes mechanical over-range stop that offers shock protection up to 10,000 g. Hermetically sealed accelerometer can be used by test engineers preferring detachable cable assembly.

Gao Tek
Toronto M1B2K4  Canada
Aug 20, 2008 Model GAOAV3620 RF Integrated Vector Network Analyzer performs accurate measurement of amplitude, phase, and group delay in RF networks, and can also measure time domain and frequency conversion components. Features include configurable upper and lower limits measurement, LCD display, and simultaneous display of 4 channels (maximum 8 testing curves).

Sunrise Telecom Inc.
San Jose, CA 95119
Aug 19, 2008 SunLite GigE(TM) tester offers multi-stream, multi-service testing ability for installation and maintenance of differentiated Ethernet and triple-play services. It helps field technicians verify end-to-end transport of GbE/IP traffic, transmit and analyze 8 independent streams, and run test methodology based on RFC2544, as well as determine throughput, link utilization, latency, and IP connectivity. Unit's 10/100/1000BASE-T and 1000BASE-X interfaces enable copper and fiber GigE testing.

CAST, Inc.
Woodcliff Lake, NJ 07677
Aug 18, 2008 Compatible with various 32-bit processor cores, PiP-AMBA system infrastructure library provides all basics needed for systems built around de facto standard AMBA bus. It includes bus and peripherals IP cores plus drivers and other essential software, pre-integrated and pre-verified. Designers add memory, processor core, and any additional functions of their own to implement complete system. Basic software functions in C or Assembly code are also provided.

SOASTA, Inc.
Mountain View, CA 94043
Aug 18, 2008 Providing turnkey web application testing environment inside firewall, SOASTA CloudTest(TM) Appliances enable access to SOASTA CloudTest Lab(TM) for load testing in cloud computing environments. UI Test Appliance offers functional/light load testing of up to 100 virtual users, while Load Test Appliance offers AJAX UI and load testing of up to 2,500 virtual users. Power User Test Appliance supports load testing of up to 5,000 virtual users and Production Test Appliance offers 7 x 24 load testing.

Timbercon, Inc.
Lake Oswego, OR 97035
Aug 18, 2008 Featuring transmit, receive, computer interface, reference clock, and power supply ports, XFP Host Test Board enables programming and testing of XFP Electric Loopbacks and XFP transceivers prior to incorporation into equipment. Users can also analyze design changes or system modifications made to existing equipment. Electrically transparent board uses Rogers 3003 PC board material and single-ended micro-strip transmission lines.

Oki Electric Industry Co., Ltd.
Tokyo 105-8460  Japan
Aug 15, 2008 Designed for ML67Q5250 fingerprint authentication LSI, second version of Software Development Kit includes evaluation board to develop fingerprint authentication systems and software. In addition to slide sensors, with fingerprint authentication algorithm that is built-in ML67Q5250, manufacturers can provide embedded systems for touch sensors. Software interface enables customers to connect desired sensor for use in different environments.

Anritsu Co.
Richardson, TX 75081
Aug 15, 2008 Able to perform high speed radio layer measurements on IEEE 802.11 WLAN chip sets, MT8860C WLAN Test Set combines capabilities of power meter, spectrum analyzer, and vector signal generator. In network mode, standard WLAN protocol messaging is used to test both transmitter and receiver of DUT, and eliminates need for control software. In direct mode, unit creates and transmits WLAN packets to test receiver of DUT, and measures transmitter via built-in analyzer.

DAQTron Inc.
Roswell, GA 30075
Aug 14, 2008 Offered as 3U cPCI module, 3410 Packet Processor offers four 10/100/1000 Mbps ports for performing layer 1-3, throughput, and packet loss tests on 10/100/1000 Mbps devices. Use of cPCI standard allows additional test functionality to be integrated in same chassis. Although data cannot be streamed/captured across cPCI backplane at full line rates, those rates are achievable between embedded processor and unit under test. Onboard RAM can then be used to capture up to limits of RAM size.

DAQTron Inc.
Roswell, GA 30075
Aug 13, 2008 Featuring selectable noise bandwidths and center frequency placement, as well as programmable impulse noise waveforms, 3U Model 3601 takes place of several instruments in one-slot cPCI form factor. Module includes integrated additive white Gaussian noise (AWGN) and burst/impulse noise for impairment testing applications. Signals from 250 kHz to 2.2 GHz can be injected into 3601 and either pass straight through, or add programmatically controlled AWGN or impulse noise to signal.

Wells Research and Development
Lincoln, MA 01773
Aug 12, 2008 With OS200B Lens Test Bench, users can evaluate performance of commercial lenses, validate performance of custom lens prototypes, track performance of incoming batches of lenses, or diagnose imaging problems. Combining classic lens test bench with live video and MTF analysis software, it can test positive, negative, and afocal modules. Unit allows visual evaluation and quantitative tests of image quality, lens parameters measurement, and wavefront aberrations visualization.

X-Rite, Inc.
Grandville, MI 49418 2567
Aug 12, 2008 By analyzing unique, 3D mathematical models, xDNA® system helps automakers and their suppliers distinguish applied characteristics of metallic flake, pearlescent, and other effect paints. Package includes MA98® handheld 31-point spectrophotometer and X-ColorQC® software package. Functionality lets users troubleshoot shop floor problems, assess adjustability of existing equipment for new process, and predict whether person will be able to perceive difference in color and appearance.

OrthoGraph Ltd.
Budapest   Hungary
Aug 12, 2008 To support floor-plan surveying of facilities, OrthoGraph Survey can manage large data amounts, connect with databases, and support teamwork. Measurements are produced in electronic format, on the spot, using all possible data-entry equipment - on-screen or external keyboard input and laser distance meter - and provides automatic control for values. Each room (logical zone) can have its own drawing, uniquely created by sketching it into PDA and measuring distances.

Tundra Semiconductor Corp.
Kanata, ON K2K2M5  Canada
Aug 11, 2008 Multi-platform solution, centered on Tsi620(TM) multi-standard RapidIO® Switch, also uses Texas Instruments' TMS320TCI6487 multi-core 3 GHz DSP and Altera® Stratix® III FPGA. Minimizing latency while allowing access to RapidIO processor clusters from FPGA without SerDes, solution allows use of RapidIO protocol for DSP or processor aggregation and offers communication with various PCI-enabled microprocessors via PMC connector. Ethernet and antenna interfaces are available.

Cepheid
Sunnyvale, CA 94089
Aug 11, 2008 Offering fully automated random access system, GeneXpert Infinity-48 manages entire molecular testing workflow, including sample data, cartridge loading and unloading, and reporting of test results. System uses robotic cartridge handling, managed by Xpertise(TM) software package and full touch screen driven menu, to run up to 1,300 different molecular tests during any 24-hour period. System can be configured with 16, 24, 32, 40, or 48 modules.

Aeroflex Laboratories
Plainview, NY 11803
Aug 11, 2008 Able to perform high-speed fixtureless test in stand-alone platform, Model 4520 flying probe system is intended for low to medium-volume PCB manufacturing environment that does not require in-line test. Flexible solution features device programming, boundary scan, and functional test capability, and is also suited for prototype applications.