|
|
Advertisement
|
|
Test & Measuring Instruments ->
Other
Other
(Showing headlines 21 - 40) << 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 ...
|
 Sensor Systems aid in solar panel production.Capacitec, Inc.
Ayer, MA 01432
Sep 28, 2009
Noncontact capacitive gap and parallelism sensor systems measure precise distance between liquid, anti-reflective, and CVD coating head-to-media during solar panel production. Systems enable manufacturers to maintain thin-film coating uniformity and to optimize yield and efficiency.
|
Ultrasound Reference Design fosters SAM1600 ADC integration.Samplify Systems, Inc.
Santa Clara, CA 95051
Sep 28, 2009
Based on SAM1600 ADCs and Prism(TM) compression technology, reference design for ultrasound market includes entire ultrasound receive chain and consumes 100 mW per channel. LVDS outputs allow for simultaneous capture of data from all 32 channels by standard FPGA development boards using provided GUI. Solution aids design-in process for SAM1600 ADCs, which reduce data bottlenecks in ultrasound machines and facilitate accelerated development of both black/white and color equipment.
|
DSP Development Tool integrates emulation capabilities, IDE.Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Sep 23, 2009
Used to aid in portable application creation, TMS320VC5505 eZdsp(TM) USB stick minimizes time and effort required to set up development tools when evaluating new DSP platforms. It utilizes 16-bit C5505 DSP and requires no other components or cables; entire development tool is powered by USB port. Along with complete Code Composer Studio(TM) v4 IDE, product integrates XDS100 emulator that offers debug capabilities and visibility inside processor for algorithm optimization and benchmarking.
|
 Zirconium Fork Density Meter takes accurate measurements.Emerson Process Management, Rosemount Div.
Chanhassen, MN 55317
Sep 18, 2009
Designed to monitor inorganic chemicals such as hydrochloric, nitric, and sulphuric acid, Micro Motion® 7826 insertion-style liquid density and concentration meter uses vibrating fork and is suited for continuous, real-time measurement and control. Corrosion-resistant instrument, suited for use in pipelines, bypass loops, and tanks, is insensitive to vibration, temperature, and pressure variations. Measurement accuracy is rated to ±0.001 g/cm³ for density and ±0.1% for concentration.
|
Development Board enables prototyping of electronic designs.Altium USA
Lyme, CT 06371
Sep 18, 2009
Offering programmable design environment, NanoBoard 3000 is supplied with Xilinx Spartan 3AN FPGA, hardware, software, IP, and dedicated Altium Designer Soft Design license. Using NanoBoard 3000, designers can construct, test, and implement FPGA-based embedded systems. IP libraries and intuitive graphical editors enable users to add processors, memory controllers, peripheral blocks, and software stacks. Designers also have option to deploy designs in modular commercial enclosures.
|
Hardware Development Kit promotes adoption of DOCSIS 3.0.Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Sep 16, 2009
Puma 5 DOCSIS® (Data Over Cable Service Interface Specification) 3.0 HDK, TNETC958, suits applications requiring scalable and flexible RF front-end solutions, such as video gateways. Included Puma 5 DOCSIS 3.0 SoC and MaxLinear MPEG tuners allow end-equipment to leverage frequency agility to select content from anywhere in cable RF spectrum. Along with up to 4 additional downstream channels via MxL241SF MPEG tuners, kit offers multiple DOCSIS 3.0 channel bonding configuration options.
|
Modular Test Platform is preconfigured and application-ready.Geotest - Marvin Test Systems, Inc.
Irvine, CA 92614-5846
Sep 15, 2009
Addressing range of analog, digital, mixed-signal, and avionics test needs, GBATS TS-700 family offers compact, 3U/6U PXI systems that include all required resources to support wide range of functional test applications, including system self-test and high pin count mass interconnect tester interface. Platform is also available with ATEasy test executive and development environment or can be preconfigured with other software development platforms.
|
 Source Measure Unit allows semiconductor parametric testing.Agilent Technologies, Inc
Santa Clara, CA 95051
Sep 10, 2009
Featuring compact size, U2723A USB modular three-channel instrument performs parametric testing of diodes, LEDs, and CMOS integrated circuits. By supplying voltage (±20 V) and current (120 mA) on all 3 channels, it can operate in four-quadrant mode and also provides current measurements down to nanoamp levels. With 15 msec rise time, unit improves throughput during mass testing of semiconductor devices and also simplifies automated testing with up to 2 embedded test scripts/channel.
|
VDSL Reference Design provides crosstalk cancellation.Broadcom Corp.
Irvine, CA 92618
Sep 10, 2009
Providing crosstalk cancellation to groups of 24 pairs of DSL lines, BCM96438v7 DSM3 Vectorized VDSL Reference Design can scale to groups of 48 pairs or more on same line termination board. Vectoring or far end crosstalk cancellation increases line performance by minimizing interference that originates from subscriber lines located in same cable binder. Combined with multiple line bonding technologies, vectorized VDSL can contribute to accelerating availability of mobile broadband services.
|
Color Control System facilitates accurate calibration.Datacolor
Lawrenceville, NJ 08648
Sep 09, 2009
Spyder3Studio SR(TM) offers calibration solution for each stage of photographic process - image capture, digital desktop image manipulation, and print output - to help create, view, and share photographs as they were envisioned. Suited for photographers and other creative artists, solution offers SpyderCube(TM) RAW calibration device, Spyder3Elite(TM) monitor calibration tool, and Spyder3Print SR(TM) (Strip Reader) spectrocolorimeter.
|
 Starter Kit enables evaluation of 8-bit microcontrollers.Microchip Technology, Inc.
Chandler, AZ 85224 6199
Sep 01, 2009
Powered by USB, MPLAB Starter Kit contains all components, documentation, schematics, debugging, and programming capabilities needed to evaluate PIC18 microcontrollers in low-power USB and touch-sensing applications. Kit includes development board featuring 44-pin PIC18F46J50 MCU with nanoWatt XLP technology, mTouch(TM) capacitive touch sensing, Bosch Sensortec BMA150 accelerometer, and 64 KB Flash memory. Pre-programmed touch-sensing code and USB application stack eliminate need to develop code.
|
Managed Service enables end-to-end triple-play WiMAX test.Epitiro Ltd
Cardiff CF10 4LN United Kingdom
Aug 31, 2009
ISP-I WiMAX Drive Test delivers mobile functionality that links WiMAX network test results with critical GPS location information to provide understanding of overall performance throughout geographical areas. Designed for network operators and government regulators, product may be used for planning mast placement and identifying not-spots in target areas. Relayed data includes real-time RF information, IP-based service delivery metrics, and voice quality scores.
|
Integrated System hastens Ethernet connectivity development.Freescale Semiconductor
AUSTIN, TX 78735-8598
Aug 31, 2009
Combining 32-bit ColdFire® V1 MCU, Freescale MQX(TM) software, and Tower System, solution gives developers customizable design environment that expedites development time via rapid prototyping and tool reuse. Supported MCF51CN MCU integrates ColdFire V1 core with on-chip Ethernet connectivity and flexible external bus. Software includes Freescale MQX RTOS and real-time TCP/IP communication suite, while modular Tower System provides open-source demonstration and evaluation platform.
|
EMI Test Receiver is CISPR 16-1-1 compliant.Rohde & Schwarz GmbH & Co
Germany
Aug 31, 2009
Compliant with CISPR 16-1-1 standard for information technology equipment, R&S ESCI7, EMI test receiver can detect and analyze radiated disturbances between 9 kHz and 7 GHz. Receiver can measure phase noise, occupied bandwidth and adjacent channel power, or determine third-order intercept point. Product has displayed average noise level between typ. -153 dBm at 1 GHz and 10 Hz bandwidth and dynamic range of 1 dB compression point of +5 dBm.
|
Signal Experiment Instrument features JTAG interface.GAO Embedded Inc.
Toronto 12345 Canada
Aug 26, 2009
Designed for signal and system experiments, Model SSP2500 provides variety of digital signal sources controlled by DSP and output waveforms. Unit can be connected to computer via serial port to form virtual oscilloscope, allowing waveforms and spectrum of both original signals and processed signals to be displayed on screen. Equipped with JTAG interface, instrument can carry out DSP experiments such as mathematics operations, FFT, task scheduling, and thread management of DSP/BIOS.
|
 Reference Design Kit facilitates DVR development.COMMELL
Taipei Hsien Taiwan
Aug 25, 2009
Designed to promote system integration, MP-840 RDK includes mini PCI add-in card based on AH-840 processor with H.264 hardware encode. Video capture card includes 4 NTSC/PAL video decoders that convert analog composite video signals to digital data as well as four 10 bit ADCs, proprietary clamp, gain controllers, and 4H comb filters for separating luminance and chrominance to reduce cross noise artifacts. Four audio ADCs and 4 channels of ADPCM audio encode are also included.
|
 Machine offers automatic form and roughness measurement.Detroit Precision Hommel
Rochester Hills, MI 48309
Aug 25, 2009
Featuring dual-tip scanning system and ±1,500 µm measuring stroke, Hommel-Etamic Roundscan permits automatic measurement of form and roughness in one pass. System can handle parts up to 540 mm dia, 900 mm in height, and up to 100 kg. Positioning probe tip anywhere on workpiece, CNC-controlled rotation and tilt module guarantees measurements can be made automatically at any measurement position. Low friction guides on measuring axes also enable profile and waviness parameters to be evaluated.
|
 WiMAX Test Software configures PXI RF measurement systems.National Instruments Corp.
Austin, TX 78759-3504
Aug 20, 2009
NI Measurement Suite for Fixed WiMAX can be used to configure software-defined PXI RF measurement systems. With it, engineers can test WiMAX base stations and mobile subscriber stations as well as components such as transceivers, PAs, and other RFICs. Specific tools allow use of same equipment used for testing WiMAX devices to test hardware that complies with other standards such as WLAN, GPS, GSM/EDGE/WCDMA, and others. System provides access to raw I/Q data and measurement result.
|
 FPGA Development Kit accelerates 3 Gbps evaluations.Altera Corporation
San Jose, CA 95134
Aug 19, 2009
Offering complete system of pre-verified components and supporting hardware reference designs, Arria® II GX FPGA Development Kit provides hardware and software resources needed to evaluate and adopt Arria II GX 40 nm FPGAs. Entire PCIe Gen1 end-point design package features PCI-SIG-compliant Arria II GX FPGA-based development board with embedded PCIe Gen1 hard IP core. Users also get one-year license for Quartus® II Design Software and access to MegaCore® IP library.
|
 Break Out Box tests and diagnoses electronic systems.SEICA Inc.
Salem, NH 03079
Aug 19, 2009
Designed for 1st level functional test with stimuli/measurement capabilities, Model PTE-100 combines features of voltage generator, current generator, waveform generator, voltmeter, amperometer, frequency meter, and oscilloscope, with features of automatic test system. Unit also includes mid-range power relay matrix with switching and interrupt functions of up to 256 I/O channels. Portable device is suited for identifying faults in electronic systems aboard helicopters, trains, and planes.
|
(Showing headlines 21 - 40) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45
|
|
|
|
 |
ThomasNet News Advertisers
|
 |
|