Pomona Electronics
Pomona, CA 91766 3835
Aug 08, 2006 SMD Multi-Use Test Kit provides 16 tools designed for attachment to SMD (surface mount device) chips with pitches down to 0.008 in. Kit includes 2 Micro and 2 Mini SMD Grabber test clips, 2 clip leads, and bench-top DMM Modular test leads. Multi-stacking 2 mm safety-sheathed patch cords, 2 SMD test probes, two 4 mm banana plug to 2 mm sheathed banana jack adapters, 2 mini-alligator clips, and folding pouch are also included.

JNJ Industries Inc.
Franklin, MA 02038
Jul 05, 2006 Lead Detector Kit offers 2 test methods that instantly reveal presence of lead, even when it exists as invisible residue on work surfaces, enabling manufacturers to help maintain healthy, safe work environment. Lead Detector wipes and swabs indicate presence of lead by displaying pink to red color, showing that further hand washing or surface cleaning is necessary. Color intensity denotes degree of lead concentration.

Ramtron International Corp.
Colorado Springs, CO 80921
Jun 15, 2006 VersaKit-20xx evaluation platform facilitates system prototyping and design development with VRS51L2070 system-on-chip. Kit features development board to support microcontroller, Versa-JTAG programming/debugging interface, DB25 Parallel Cable, and power supply. Development board incorporates set of probe vias and header footprints for access to chip peripherals and I/Os, RS-232 transceiver and 2 DB9 connectors for UART access, and 2 tact switches for manual reset/interrupt triggering.

EYE Lighting International of North America, Inc.
Mentor, OH 44060
May 26, 2006 Fixture Analyzer Kit helps maintenance personnel identify in less than 1 min. HID (High Intensity Discharge) fixtures that are past their useful life. It features Test Socket Adapter with safety lead connectors that screws into fixture socket, allowing maintenance personnel to safely perform test without reaching into wiring box with test probes while fixture is energized. Hard-shell carrying case protects meter and serves as storage container.

Schroeder Industries LLC
Leetsdale, PA 15056-1025
May 16, 2006 Compatible with hydraulic and lubrication oils, Patch Test Kit includes vacuum pump that draws fluid sample through membrane patch into mixing vessel with reagents. Exposure to reagents causes increase in pressure within vessel, which is measured and converted into water content and displayed on screen in ppm or percentage by volume. Residual dirt on patch is viewed under microscope and compared with photos of known contaminants included in Contamination Handbook.

Lincoln Industrial
St. Louis, MO 63120 1578
Feb 01, 2006 Available in gasoline and diesel models, Digital Compression Test Kits feature backlit LCDs that show measurements in psi, Bar, or kPa. They provide memory storage of peak readings on up to 12 cylinders, and values are retrieved by scrolling through cylinder numbers. Construction features grease- and oil-resistant gauge face as well as buttons that are sealed from elements. Timed automatic shutoff feature helps extend life of 9 V battery.

Ahwahnee Technology
San Jose, CA 95138
Jan 05, 2006 Carbon Nanotube (CNT) Innovation Kit(TM) development toolbox includes 4 containers of CNT material: one pair Bundled Multi-Walled CNTs and one pair Un-Bundled. All have as grown structural purity exceeding 90%, and one container of each pair features 99% chemically-pure CNTs. Sufficient quantities are provided, 20 g of each type, to conduct evaluation and development projects. Kit also provides CNT reference books, documents, and software tools for product commercialization.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Oct 25, 2005 Designed to reduce development time in wireless infrastructure (WI) applications, TSW3000 evaluation module combines 16-bit, 500 MSPS interpolating DAC; clock synthesizer and jitter cleaner; direct quadrature modulator; and monolithic PLL frequency synthesizer. RF transmit signal chain demonstration kit provides complete RF transmitter from digital baseband to analog RF, addressing the RF transmission needs of wireless base station or fixed wireless access equipment.

Fluke Corp.
Everett, WA 98203
Sep 27, 2005 Fluke 1587/ET Advanced Electrical Troubleshooting Kit includes insulation multimeter, current clamp, and infrared thermometer. Model 1587 true-rms digital multimeter provides insulation resistance testing up to 2 GW with 5 output voltages ranging from 50-1,000 V. Current Clamp Model i400 measures current from 1-400 A ac without breaking circuit, and Fluke 62 mini non-contact thermometer finds hot spots in temperature range -20° to 932°F with accuracy of +1% of reading.

Fieldbus Foundation
Austin, TX 78731
Aug 12, 2005 Interoperability Test Kit v4.61 verifies functionality of device with FOUNDATION fieldbus Function Block specifications. Suited for troubleshooting and debugging devices, kit includes test engine, communication stack, and Function Block interface card. Test engine executes over 400 test cases that exercise device implementation. Tester also includes conformance test procedure for physical layer, and viewer that allows examination and verification of device description.

Greenlee Textron, Inc.
Rockford, IL 61109
Aug 10, 2005 Electrical Kit TK-30 is comprised of DM-20 manual ranging multimeter, GT-11 voltage detector, and GT-10 polarity cube. Model DM-20 measures current of small electronic circuits, ac/dc voltage, dc amperage, resistance, and also checks 9 V batteries. Offering non-contact voltage detection, Model GT-11 provides LED and audible alarm if voltage is present. Model GT-10 troubleshoots 120 Vac grounded outlets and has light sequence that indicates correct or incorrect wiring.

esd electronics, Inc.
Hatfield, MA 01038
Jul 07, 2005 CAN-STEPCON (CANopen) starter kit enables PC users to gain experience with CANopen motion control in stepper motor applications. It contains CANopen stepper motor controller, CAN-STEPCON-1H; I/O wiring; 100-240 Vac/47–62 Hz power supply; and CAN network. Included CAN-USB-Mini interface module, with bit rate up to 1 Mbps, acts as CANopen Manager, while CAN-STEPCON-1H acts as slave. Provided with operator software for Windows, kit is fully programmable.

Altera Corp.
San Jose, CA 95134-1941
Jun 01, 2005 Based on Cyclone™ II FPGAs, development kits facilitate prototyping of Nios® II embedded processor, DSP, and PCI designs. Each kit includes Cyclone II development board, CD with documentation and reference designs, and power supply as well as necessary cables, Quartus® II design software, and suite of interface IP cores. Nios II Development Kit provides everything needed for system-on-a-programmable-chip development.

Neutronics, Inc.
Exton, PA 19341 2541
May 26, 2005 Suited for both R134A and R12 systems, QuickDetect A/C Sealant Detection Kit includes A/C coupler, hose, test cartridge, and flow meter. When connected to mobile A/C system, it mimics A/C leak. If sealant is present in system, it will quickly solidify in disposable test cartridge and cause flow meter to show no-flow. Except for test cartridges, all Quick Detect components are reusable. Additional cartridges are available separately.

Fiso Technologies Inc.
Quebec, QC G2E 5R9  Canada
May 19, 2005 Dynamic Multi-Parameter Test Kit comes with BUS Commander Software and variety of Fabry-Perot fiber optic sensors, including temperature, pressure, strain, and refractive index sensors. BUS signal conditioner and acquisition system is configured with 2 channels, offering simultaneous reading with sampling rate to 1,000 Hz. System is upgradeable to up 8 channels per chassis, can be cascaded, and can be controlled from remote computer.

Goal Semiconductor Inc.
Montreal, QC H3B 1H4  Canada
May 17, 2005 HVDAC DevKit, model UVK-HVDAC200-4, provides plug-and-play platform for evaluation and prototype development using HVDAC200-4 quad, 9-bit, serially configurable voltage/current DAC with outputs of up to 200 V. Kit comes with Windows®-based demo program and consists of Goal VERSA MIX 8051 MCU, onboard voltage reference, and 2 adjustment potentiometers. Kit also offers over-temperature and temperature-sensor-threshold adjustment, terminal block, and PLCC-44 socket.

Altera Corp.
San Jose, CA 95134-1941
Mar 09, 2005 DSP Development Kit, Cyclone™ II Edition, allows users to design, prototype, and debug digital signal processing (DSP) co-processing applications for various applications. It includes Cyclone II FPGAs, Texas Instruments' (TI) ADS5500 ADCs, and interface to TI's DSP starter kits. Platform also supplies users with development board, Mathworks' Simulink software, DSP Builder, and Quartus® II design software.

Atmel Corp.
San Jose, CA 95131
Mar 04, 2005 Supporting AT91SAM7S-series ARM7®-based Flash microcontrollers, AT91SAM7S64-IAR Development Kit includes evaluation board and J-LINK USB-to-JTAG debug interface along with suite of development tools from IAR Systems. Tools include 20-state version of visualSTATE® for SAM7S and 32 kByte code limited KickStart version of IAR Embedded Workbench® for ARM®. Kit enables users to show proof of concept when designing in AT91SAM7S.

Superior Solutions
Netanya 42140  Israel
Feb 24, 2005 Motion Control Evaluation Kit EVA-54300-D enables users to evaluate Series-5000 with software package that includes SuperiorCNC, Machine Operator Interface, Sequencer, Labview Drivers, HPGL Converter, and Experts API 32. It provides complete system sample of Series-5000 components in order to experience and understand its abilities. Kit also enables immediate integration and operation of system using pre-assembled cables between all items.

Crowcon Detection Instruments
Milford, OH 45150
Oct 12, 2004 Supplied in carry case, Wizard Gas Testing Kit applies standard 4-gas mixture to Tetra monitor to check that each sensor is working within acceptable response limits. If Tetra determines that any sensor is outside predefined limits, it displays message indicating need for calibration. Wizard includes 34 l cylinder of methane, oxygen, carbon monoxide, and hydrogen sulfide, fitted with trigger valve for switching on gas.