ADLINK Technology Inc.
Irvine, CA 92618
Jun 13, 2008 Consisting of EC-8560 ExpressCard® and PXI-8565 PXI card, EC-8560/PXI-8565 extends more PXI slots from ExpressCard®-based laptop computer via shielded cable connection up to 23 ft in length. ExpressCard®-to-PXI extension system expands I/O capability of measurement and automation systems from mobile device and offers isolation to minimize effect of high frequency interference from CPU, memory, or chipset of host system on PXI cards. Kit withstands high temperature and harsh vibration.

Xsens Sports Technologies B.V.
  Netherlands
May 29, 2008 Suited for applications relying on data output for orientation, stabilization, or navigation, MTi trackers are available with software and firmware that contains predefined settings for optimized orientation output in specific areas. Firmware of MTi and MTi-G includes algorithms for increased performance under various conditions, and SDK contains MT Manager software tool for configuring, recording, and displaying IMU/AHRS/GPS outputs in real-time.

Colibrys, Inc.
Stafford, TX 77477
Mar 27, 2008 Designed for safety critical applications, inertial accelerometer Model MS9000 is available in variety of G ranges from ±2 to ±250 G. Sensor operates over extended temperature ranges with milli G bias stability over extended lifetime. It is enclosed in LCC20 ceramic package measuring 8.9 x 8.9 mm and conforms to MIL-STD-883-E standards required by aerospace and military markets.

Beckman Coulter, Inc.
Fullerton, CA 92834-3100
Mar 13, 2008 Consolidating chemistry and immunoassay testing targeted to high-volume laboratories, UniCel DxC 880i Synchron® Access® clinical system offers menu of more than 150 different chemistry and immunoassay tests, with 120 onboard. System can process up to 1,440 chemistry and 400 immunoassay tests/hr, respectively. It features closed-tube sampling and closed-tube aliquotting capabilities to eliminate de-capping and re-capping steps in laboratory process.

Elma Electronic Inc.
Fremont, CA 94538
Feb 27, 2008 Offered as passive extender module, AMC extender card supports all fabric connectors as defined in AMC.x and MicroTCA specifications. It extends all fabric signals and 3 clock lines out of card cage area so Advanced Mezzanine Card (AMC) can be tested or debugged. Plugged into AMC slot, solution features metal frame that holds board under test securely in place. Management and payload power can be individually switch isolated.

Siemens Medical Solutions USA
Malvern, PA 19333
Jan 09, 2008 Suited for mid- and high-volume clinical diagnostic microbiology laboratories, MicroScan® WalkAway® plus Systems offer simultaneous automation of overnight, rapid, and specialty panels that test for both gram negative and gram positive bacteria. Both systems combine minimum inhibitory concentration testing with automated features, including automated maintenance and dial-up system diagnostic capability.

Elma Bustronic
Fremont, CA 94538
Jun 12, 2007 Designed to provide access to both sides of test board, VXS Payload Extender Boards bring circuit card completely out of card cage or enclosure so that it can be tested or debugged. There are test points for all of lines on each 160-pin connector and MultiGig P0 connector. Offered 10-layer stripline design for rigid PCB and microstrip design for flex circuit portion, boards include ampmeter and feature digital indicator on front panel showing status.

Burke E. Porter Machinery Co.
Grand Rapids, MI 49505
Feb 15, 2007 HOST Cell Control System (CCS) features single computer test CCS consisting of fan-less processor, flash storage, and real-time operating system, and software to control dynamometer, fan, robot, and data acquisition. Software provides tools to create displays, sequences, drive curves, grade profiles, test monitors, and data acquisition schemes. Auto complete typing, library to check solutions in and out, and detachable tool pallets are also included.

Elma Bustronic
Fremont, CA 94538
Feb 03, 2006 VXS Extender Boards utilize right angle pin connector that plugs into backplane, connected to flex circuit that wires to straight receptacle to receive plug-in board. Units bring circuit card completely out of card cage or enclosure so that it can be tested and debugged. There are test points for all differential pairs on MultiGig fabric connector for hub slots. Boards come in 10-layer stripline design for rigid PCB and microstrip design for flex circuit portion.

Elma Bustronic
Fremont, CA 94538
Dec 23, 2005 AdvancedTCA (ATCA) test extender board, which features metal frame with latching handles, brings circuit card completely out of card cage or enclosure for testing/debugging. Providing access to both sides of board under test, product extends power and IPMB signals. It has 10-layer stripline design and is designed for full populated fabric slot and power connector J10. Zone 3 section has flexible design that allows for customization.

New Wave Research
Fremont, CA 94539
May 17, 2005 Used to provides aerosol washout and transient signal analysis, SuperCell™ features 18.5 cm² work area that accommodates multiple samples and standards simultaneously. When analyzing single-pulse, transient signals, design reduces aerosol dispersion, compressing and amplifying analytical information. For steady-state acquisitions, when sample is continuously ablated, unit displays typical signal rise times and rinse times of less than few seconds each.

Emerson Process Management
Austin, TX 78754
Mar 28, 2005 Foundation fieldbus Model CSI 9210 acquires vibration, temperature, motor flux, and machine speed on ac motor-pump machine trains, analyzes measured data, calculates machinery health, issues alerts if necessary, and recommends action to be taken. Analysis engine identifies damaging conditions such as pump cavitation, bearing degradation, excessive synchronous vibration, and motor overloading and overheating. Results are communicated into process automation systems.

Computer Age Engineering Inc.
Marion, IN 46953
Oct 07, 2004 With max cycle time of 6 sec, Dial Automated Swage Cell performs deflashing, gauging, testing, and sizing operations on vibration control bushings. Cell, requiring 80 ft² of floor space, is assembled in modular arrangement and comprised of sub-assemblies. Dual dial, precision-synchronized indexing tables transfer bushings from station to station, and standard bushing size ranges from 1 in. dia x 1 in. tall to 3½ in. dia x 4 in. tall.

Malvern Instruments Inc.
Southborough, MA 01772
Aug 24, 2004 Comprising cup and bob assembly in fully-enclosed environment, Model HPC 300 mounts directly onto CVO, C-VOR, and Gemini rheometers, enabling measurement under conditions that simulate fluid processing. All wetted parts are Hastelloy C, allowing use with chemically aggressive samples. Integrated electrical heater achieves temperatures up to 300°C with operating range of 40–300°C. Pressurization is from external source or from vapor pressure generated by sample under test.

BEI Systron Donner Inertial Div.
Concord, CA 94518
Jun 17, 2004 Model MMQ50 utilizes solid-state quartz MEMS inertial rate sensors and silicon MEMS accelerometers. Powered by ±8 Vdc supplies and consuming 4 W, unit features full 6° of freedom sensing capability and internal microprocessor that thermally compensates sensors. Suited for stabilization or guidance and control applications, device outputs serial RS-644 digital signal data stream comprising angular velocities and linear accelerations about 3 orthogonal axes.

Sakor Technologies, Inc.
Okemos, MI 48864
Apr 20, 2004 DynoLAB™ PT v4.1 offers Ethernet support, providing bandwidth for data acquisition and enabling high level of remote monitoring. Wireless Ethernet offers potential to eliminate all physical connections between test cell devices and control room. Test system employs DynoLAB Test Executive™ software based on National Instrument's LabVIEW architecture. It supports gas analyzers, function generators, oscilloscopes, and electric motor drivers.

Atlas Material Testing Technology LLC
Chicago, IL 60613 1831
Jan 20, 2004 Model CCX Advanced Cyclic Corrosion Cabinet with 90°C option features temperature-resistant materials for dispersion towers and connectors, temperature-resistant fiberglass shell and gel coat, fiberglass cover with tempered-glass viewing window, and insulation around exposure zone. Unit replicates stresses that result in degradation including salt-saturated air and salt spray, high humidity, condensation, sunlight, and temperature variations.

Cal Test Electronics
Yorba Linda, CA 92887-4604
Aug 19, 2003 Model CT3116 DMM Kit includes 2 fused probe bodies, 2 highly-flexible silicone jacketed leads, and 2 fully-insulated alligator clips. Leads are not affected by cold weather or hot soldering iron. Probes feature 4 mm contact tip and utilize internal ceramic fuses rated at 10 A. Alligator clips have IP2X connection covers which, when plugged into fused probes, maintain overall safety. All components are compliant with IEC61010-031 International Safety Specification.

Silvertronic USA
Windsor, CA 95492 8125
Aug 06, 2003 Ten-piece Professional Series DMM Test Lead Kit includes test leads, 2 modular probe sets, crocodile clips, and sprung hooks. One probe set features sharp stainless steel tip for electronic and electrical test applications. Second probe set is configured with flat blade tip for hands-free testing of AC outlet receptacles. Test leads have over 250 fine strands of flexible, double insulated silicone wire, which is resistant to solder iron damage.

BEI Systron Donner Inertial Div.
Concord, CA 94518
Feb 24, 2003 MEMS-based Digital Quartz Inertial Measurement Unit utilizes GyroChip® technology consisting of dual-ended quartz tuning fork rate sensor and vibrating quartz accelerometer. It provides delta theta and delta velocity output at 100 Hz in 6 axes, with linear acceleration and angular rate output at 600 Hz in RS-422 AMRAAM output format. Miniature unit is suited for guidance, navigation, and control for commercial, aerospace, and defense applications.