Teseq, Inc.    Edison, NJ 08837
May 04, 2012 By using FLX 5510 with NSG 5500 Transient Immunity Test System, automotive EMC laboratories can design their own pulses as well as meet custom specifications including pulse impedance, peak voltage, pulse width, and pulse width under load. Included with each FLX 5510 are two DIY 5510 submodules, one with fully functional example circuit as well as empty one ready for use. FLX 5510 has pulse network peak current of 300 A, pulse network max voltage of 660 V, and max pulse width of 30 ms.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Apr 13, 2012 Designed for CT3 Tester, which operates in both compression and tension modes, TA-CLT Capsule Loop Tensile Test Fixture measures tensile breaking strength of hard gel capsules. Gel cap is mounted between 2 pins which pull apart, thereby measuring force required to rupture cap. Featuring guillotine type design, TA-BLS Bilayer Shear Jig measures force required to separate layers of multi-layer tablet. Tablet is placed in jig and cutting plate slices into tablet until adhesion fails.

STMicroelectronics    Lexington, MA 02421
Apr 03, 2012 Supplied in 3.5 x 6 x 1 mm package, iNemo LSM333D enables advanced movement and location-sensitive apps, location-based services, and indoor navigation on portable SFF devices. Fully integrated sensor module delivers 9-DOF (Degree of Freedom) inertial sensing by combining 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetic sensor in one package. Also included, sensor-fusion software helps designers enable indoor navigation, LBS, dead reckoning, and motion/position detection.

International Crystal Laboratories    Garfield, NJ 07026
Mar 14, 2012 Able to be heated to 200°C, Variable Path Length Cell features programmable ramp and soak temperature controller with RS-232 serial cable computer interface. Cell back plate is water-cooled and body is insulated as is vernier scale adjustment on front of cell. Path length may be continuously adjusted from 0.05-5 mm and reproduced within 0.001 mm. In addition, cell may be adjusted to provide precise intensity for exact location of both weak and strong bands.

LOC-AID Technologies, Inc.    Boca Raton, FL 33432
Mar 07, 2012 Global Cell-ID(TM) allows enterprise mobile developers to acquire carrier-certified, permission-based location on their devices in over 165 countries globally. With enhanced location APIs, location-as-a-service (LaaS) platform can deliver mobile device location, even if device has roamed out of the country. LaaS system is designed for global brands and logistics companies such as financial services, security, telematics, M2M, and logistics companies and operations.

Abbess Instruments & Systems, Inc.    Ashland, MA 01721
Jan 17, 2012 Providing for up to 80 thermocouple pairs - 16 x 5-pair subassemblies - over 10 in. dia footprint, High Density, High Count, Thermocouple Port for 1x10-10 Torr is suited for Altitude Test and Space Simulation users. Single-sensor fault is resolved by changing out one affected feedthrough subassembly, and blanked (leak tested) feedthrough subassembly positions A/R for future upgrade/refurbishing flexibility. Also standard, chamber port accepts Thermocouple Feedthrough Assembly.

Aries Electronics, Inc.    Bristol, PA 19007-6810
Dec 26, 2011 Accommodating use from -55 to +200°C, AR4HT Series incorporate low-profile (0.45 mm) contact structure that provides compliance for ATE testing and burn-in. Sockets work with various area-array devices, including BGA, LGA, QFN, DFN, CSP, MLCC, and POP, as well as bumped die with full and partial arrays. With life expectancy of 10,000+ actuations, products can accommodate IC devices with pitch of 0.4 mm or greater as well as mixed pitch environments.

Webtec Products Ltd    Milwaukee, WI 53235
Dec 08, 2011 Designed for testing mobile machinery with max theoretical power of over 1,500 hp, DHCR1500R Test Kit enables operator to measure flow, pressure, and temperature while simultaneously loading system using pressure loading valve. HV1500 valve, featuring built-in burst disc safety mechanism, allows operator to simulate machine circuit under normal conditions by restricting flow. With code 62 2-in. fittings, kit is rated to max of 400 gpm and 6,000 psi.

HD Electric Co.    Waukegan, IL 60085
Nov 17, 2011 Supplied in soft-sided, multi-functional carrying bag with built-in bucket hooks, Model DVM-80UVK is designed to perform voltmeter and phasing operations for virtually all overhead and underground applications. Kit includes dual stick phasing voltmeter with overhead hook probes for use up to 40 kV, as well as add-on resistor sticks for measurements up to 80 kV. Kit also contains underground bushing probes, cable fault tester, and shotgun hotstick adapters.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Nov 15, 2011 Designed for testing 0.5 mm pitch, 14 x 18 mm eMMC BGA device, SG-BGA-7219 connects all pins with 10 GHz bandwidth and operates with less than 1 dB insertion loss. Contact resistance is 20 mohm per I/O (typ), and mounting is accomplished via supplied hardware on target PCB without any soldering. Quick insertion method, using shoulder screws and swivel socket lid, accelerates IC change-out, while floating compression mechanism accommodates package manufacturing variations.

Avenview Corp.    Kenmore, NY 14217
Oct 13, 2011 Measuring 2.91 x 1.3 x 0.45 in., FO-DP-300-EMI DisplayPort Extender over Single SC Fiber Optic transmits up to 4 videos and 1 low-speed lane, while simultaneously receiving 1 low-speed signal, all on 1 multi-mode fiber. Device supports DPCP and HDCP by AUX channel as well as resolutions up to 2,560 x 1,600. Applications include video wall systems, large LED sign boards, medical imaging equipment, TV broadcast stations, and conference rooms.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Aug 24, 2011 Designed to test 0.4 mm pitch, 32-lead QFN devices with center ground pad, Model CBT-QFN-7008 features temperature range of -55 to +155°C. Etched spring pin contactor, with cycle life of 500,000 insertions, provides 0.95 nH self inductance, insertion loss of less than 1 dB at 7 GHz, and 0.097 pF capacitance. Current capacity of each contactor is 4.1 A at 60°C temperature rise. In addition, socket has wave spring with swivel compression plate for vertical force without distorting device position.

MRG Labs    York, PA 17404
Aug 16, 2011 With 1 g of grease, Grease Thief® Sampling Kits give users approved ASTM standard practice for sampling critical grease lubricated equipment and ensuring trendable analysis. Samplers can be used with Kittiwake's ANALEXfdMplus ferrous debris analyzer for rapid wear level determination. In Grease Thief Analyzer, sampling devices are connected to extrusion die for consistency evaluation and sample preparation to obtain insight into wear, consistency, contamination, and oxidation condition.

SKF USA, Inc.    Lansdale, PA 19446
Aug 08, 2011 With SKF Grease Test Kit, users can take samples and evaluate grease consistency, oil bleeding characteristics, and contamination in field, without training or use of harmful chemicals. Kit is equipped with instructions, methodology, relevant tools for sampling and testing, and guidelines to interpret test results. Sample size of only 0.5 g is required to perform all 3 tests and process can be conducted as frequently as necessary.

Eagle Eye Power Solutions, LLC    Milwaukee, WI 53211
Aug 08, 2011 Designed to test and maintain battery capacity, LB-Series is available in variety of voltages and loads, with or without wireless monitoring per cell. Load banks test 24-240 Vdc power units by applying load up to 300 A. Systems offer 4 settings for auto-shutdown of discharge, continued discharge features, and integrated functions for displaying, controlling, and discharging. Custom options are available for specialized discharge testing needs.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Jul 01, 2011 Suited for hand test and temperature characterization as well as debugging in femtocell development, Model CBT-BGA-6015 has stamped spring pin contactor with 19 g actuation force per ball and cycle life of 500,000 insertions. Contactor features self inductance of 0.93 nH, insertion loss of less than 1 dB at 23.2 GHz, and contact resistance of less than 16 mW. Specific configuration of package to be tested in socket is BGA, 52.5 x 52.5 mm, 1 mm pitch, 2097 position, 51 x 51 ball array.

LeCroy Corp.    Chestnut Ridge, NY 10977
Jun 17, 2011 MIPI M-PHY test suite is tailored to verification, debugging, and conformance testing of MIPI® Alliance M-PHY(SM) as well as other signal types using M-PHY physical layer standard. Suite provides all tools needed to address conformance test specifications: WaveMaster 8 Zi oscilloscope for protocol, eye diagram, and jitter/skew; PeRT(3) Eagle for Loopback mode initiation and jitter tolerance; and SPARQ-4004E for Transmitter, receiver, and cable TDR and S-Parameter tests.

Electro Standards Laboratories    Cranston, RI 02921 3403
Jun 06, 2011 Telephone and Telecom Test Kit offers 13 cables designed to facilitate test and access of high-speed data interfaces. Bantam Plug to Two Mini-Grab Test Hooks cable, Catalog No. 940322-006, consists of miniature 3-conductor nickel phone plug connected to 2 mini-grab test hooks that have one red and one black body. This 26 AWG, shielded, twisted pair cable has high-flex PVC jacket. Mini-grab test hooks enable user to spring hook onto hard-to-reach circuit points.

New Imaging Technologies (NIT)    91370 Verrières le Buisson   Canada
Jun 02, 2011 With MC1005-HBOEM Evaluation Kit, users can test and assess performance of NSC1005C 720p High Dynamic Range Color Sensor. Kit operates with standard 14 bit CAMLINK digital interface and includes CS mount lens interface. Compatible with Dalsa and ImperX frame grabbers, MAGIC View software player utilizes NIT's algorithms for debayering images in high dynamic logarithmic response mode.

Ironwood Electronics, Inc.    St. Paul, MN 55121
Jun 01, 2011 Addressing requirements for testing Amkor 24-lead QFN, CBT-QFN-7005 features stamped spring pin contactor with 26 g actuation force per ball and cycle life of 500,000 insertions. Contactor properties include 0.88 nH self inductance, less than 1 dB @ 15.7 GHz insertion loss, 0.097 pF capacitance, and 4 A @ 80°C temperature rise current capacity. Operating from -55 to +180°C, socket offers wave spring with swivel compression plate for vertical force without distorting device position.