Torque Meters

Portable Tools, Sensors, Monitors & Transducers, Test & Measuring Instruments

Torque Measurement Equipment enables full data traceability.

March 4, 2016

Suitable for auditing and calibrating assembly tools, Torque Measurement Equipment certifies that tools are within tolerance. Full product offering includes simple tool checks featuring CM/CMK or SPC test results, to complete standalone Mobile systems. For optimized system accuracy and data communication, all transducers feature full digital communication to PC or analyzer. Torque wrenches can be used as production device or quality check device to check residual torque on fasteners.  Read More

Mechanical Power Transmission, Test & Measuring Instruments, Transportation Industry Products

MHI-MME Exhibits at Sea Japan 2014 Welcomes Maritime Participants at Its Luxurious Bar Counter

April 1, 2014

Tokyo, Japan – Mitsubishi Heavy Industries Marine Machinery & Engine Co., Ltd. (MHI-MME) will exhibit at Sea Japan 2014 to be held at Tokyo Big Sight from April 9th to 11th. MHI-MME will co-exhibit with Mitsubishi Heavy Industries, Ltd., MHI Marine Engineering, Ltd. and Calnetix Technologies, LLC* (Calnetix) from the USA. Sea Japan is one of the largest marine exhibitions in the world, and... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Digital Torque Tool Tester stores up to 1,000 readings.

September 13, 2012

Suitable for production environments, Series TT02 tests manual and electric torque screwdrivers, wrenches, and other tools. Product captures peak torque in both measurement directions and also calculates first and second peaks. Sampling rate of 7,000 Hz and accuracy of ±0.3% lend to reliable, consistent test results. Available with 12, 50, and 100 lb-in. torque capacities, tool has universal 3/8 in. square receptacle that accepts common bits and attachments. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Rotary Torque Measurement System uses digital telemetry technology.

September 14, 2011

Featuring non-contact design, TMS 9250 eliminates mechanical interference by measuring torque wirelessly. Modular design enables it to be adapted or customized to fit into different types of test stands to meet specific application requirements. Quick-attach wiring connectors accelerate installation, while parameters readily accessible via software system facilitate setup and adjustments. Mechanical configurations include DIN, SAE, integral coupling, shaft-to-shaft, and custom mounting. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Torque Testers accept expanded variety of torque tools.

October 11, 2010

Designed to test hand-operated torque screwdrivers, wrenches, and other tools, STA Torque Tool Testers feature solid aluminum housing for years of service in production or laboratory use. Universal receptacle with square drive and grooves accepts common bits and attachments. Available in 12, 50, and 100 lb-in. capacities, testers provide ±0.5% ±1 digit FS accuracy. Units capture peak torque in both clockwise and counterclockwise directions and offer selectable units of measurement. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Digital Force Gauge suits QC, manufacturing, and R/D areas.

October 7, 2010

Designed for tension and compression force testing, Series 4 includes capacity ranges from 0.12-500 lb and is accurate to better than ±0.2% FS. Sampling rate of 3,000 Hz produces accurate results, even for quick-action tests; backlit LCD displays legible characters; and menu navigation accelerates access to gauge features and configurable parameters. Along with data output via USB, RS-232, Mitutoyo (Digimatic), or analog, gauge offers on-board data memory for up to 50 readings. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Solid Flanged Reaction Torquemeters are NIST-calibrated.

September 6, 2010

Models 2206 and 2207 solid flanged reaction torquemeters are stationary instruments that measure static and dynamic torque of rotating and non-rotating drivelines. Available torque ranges are from 300,000-750,000 lbf-in., with either ±2 mV/V or ±10 V output, and all units are calibrated CW and CCW to rated load. They are suited for industrial torque measurement and control applications including valve actuators, servo valves, hydraulic motors, and stepper motors. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Ultrasonic Moscow Gold for Norbar

June 23, 2010

The USM-3 ultrasonic bolt meter, manufactured by Norbar Torque Tools has won a gold medal* at the recent MetrolExpo show in Moscow. This is a leading event for metrology, the science of measurement, and the award was presented "for high quality accuracy of measurement, ease of use, storage and retrieval of data."<4444>The portable USM-3 provides precise measurements for the elongation and load... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Digital Torquemeters replace two sensors.

May 26, 2010

Featuring 2 ranges with independent outputs, MCRT® 79700V Series accurately measures torque, even if ratio of peak to average torque is high. Three simultaneous analog outputs can be individually set to 5 or 10 V at each range full scale. Overrange is 150-300% and mechanical overload is 200% of High range and 1,000% of Low range. With RS232 serial port, units can provide digital output of torque, speed, and power. Included software interfaces with Windows PC for data display and collection. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Test Stand facilitates torque measurement.

October 13, 2009

Offering all mechanical specifications of TSTM test stand, TST-DC/TSTMH-DC Motorized Torque Test Stand provides 100 lb-in. torque capacity. Modular unit includes fixture mounting plate and enables quick engagement and disengagement of samples. Stepper motor design prevents speed variation with load. Stand works with variety of force gauges offering capacities from 50 g full scale to 1,000 lb and capturing peak force in both tension and compression. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

USM-3 Ultrasonic Bolt Meter Updates Faster for Data Recorders and Tool Controllers

August 31, 2009

Willoughby, OH - The Norbar USM-3 Ultrasonic Bolt Meter now offers the capacity for even faster updates of fastener elongation and load than previously available for users in automotive, heavy equipment, engine, chassis, engineering and production teams desiring to collect and analyze data on torque or torque+angle and the relationship to bolt load over time. USM-3 is a precision instrument... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Multifunctional System calibrates, measures, analyzes torque.

August 21, 2009

Powered by Torque Data Management System (TDMS) software, T-Box incorporates torque measurement, calibration, data archiving, and management capabilities. It analyzes torque tool performance/joint characteristics and supports connection of up to 4 SMART transducers. Set-up is accomplished through touch-screen prompts, and software can prompt return of tools at required re-calibration interval. Connectivity is fostered via 2 USB ports, one RS232 serial port, and ancillary connection. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Force Measurement Module features plug and play operation.

August 12, 2009

With rugged aluminum housing, RG smart load cell is designed for integration in to assembly systems, weighing systems, and process automation and testing automation applications. It is controlled by commands sent from PC/PLC thru its RS-232 connector. Device has ASCII command library that allows for functions including peak force recall, set points, data averaging, data filtering, and calibration. Module is offered in capacities of 2-200 lb. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Tensile Tester features self-tightening grip.

June 23, 2009

Offering capacity of 1,200 lb, Wedge Grip features hardened serrated steel jaws that are opened with ergonomic spring loaded knob and rack-and-pinion type mechanism. Jaws ride on rollers instead of sliding along surface of housing, preventing jamming. Additional features include thru slot for samples of unlimited width, and optional swivel adapter that provides proper sample alignment in pull testing applications. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Measurement Flange comes in 2 standard torque ranges.

May 5, 2009

Available with nominal torques of 5 and 10 kNom, T40 torque flange has compact design that facilitates integration in test bench and copes with impact/vibration. Data transmission between rotor and stator is digital, ensuring error-free measured value acquisition and transmission even under difficult ambient conditions involving EMI or fluctuating temperatures. Maintenance-free design employs no slip rings or bearings, and measured torque can be output via voltage or frequency output. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Combination Gage/Sensor accommodates various remote sensors.

February 20, 2009

Used to help assess and ensure product quality, BGI Force/Torque Gauge can work with unlimited number of interchangeable remote sensors. Device supports programmable default configuration for each sensor and provides RS-232, Mitutoyo, and analog outputs. Plug-and-play operation eliminates need for calibration and setup, while GCL provides full computer control. Capable of sampling at rates to 65 readings/sec, instrument offers accuracy of ±0.1% of FS ±1 digit + sensor's accuracy. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Digital Torque Tester offers one touch operation.

February 2, 2009

Suited for all types of QC/QA/R&D and production testing, TNP series provides one button data recording, zeroing, and set-up for next test. It offers clockwise and/or counterclockwise torque testing for bottles, containers, valves, solenoids, and rotary switches, and graphically displays distribution curve for peak, max, min, avg, and standard deviation on PC through USB. Product comes with software, USB interface and cable, and suits laboratory or factory use. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Digital Torquemeters operate even with misalignment.

December 24, 2008

MCRT® 86000V and 87000V Series Bearingless Digital Torquemeters tolerate rotor to stator misalignments of 1 in. axially and 0.3 in. radially. They feature antennae immune to metal components positioned as close as 1/10 in. and are immune to EMI noise, ISM emitters, and closely spaced similar devices. Offering 0.05% accuracy, 400% mechanical overload ratings, and 300% electrical overrange, they are available in full-scale ranges from 50-10,000 Nm. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Reaction Torquemeters offer installation flexibility.

January 10, 2008

RTM 2200 Series Solid Flanged Reaction Torquemeters accurately measure static and dynamic torque of rotating and non-rotating drivelines, with torque ranges from 10 oz-in. to 100,000 lb-in. Accuracies are 0.1% of transducer range, with 200% overload ratings. Using foil strain gauge technology, devices are temperature compensated and available in mV/V signal output models with conditioner dependent bandwidth and 0 to ±10 Vdc models with bandwidth of dc to 500 Hz. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Digital Torquemeters require no manual adjustments.

October 24, 2006

Offering full scale ranges from 25-10,000 lbf-in., non-contact MCRT® 48200V Series produces ±10 V or ±5 V analog output and is available with 0.2% Code N or 0.15% Code C accuracy. Units feature alloy steel shaft with 200% torque overload capacity, and provide engineering unit data via com port. In addition to storing calibration values, scaling, and units of measure in non-volatile memory, meters automatically load these values when powered up. Read More