Rheometers

Test & Measuring Instruments, Laboratory and Research Supplies & Equipment

Touchscreen Rheometers operate in controlled stress/rate modes.

March 6, 2014

Used for making rheological measurements, whether it is single point viscosity for QC or complete flow curve analysis for R&D, RST Series operates in both controlled stress and controlled rate modes. Products can perform all viscoelastic modulus, yield stress, viscosity vs. shear rate profile, thixotropy calculation, creep behavior, recovery after flow, and temperature sensitivity tests. Models include RST-CPS Cone Plate, RST-CC Coaxial Cylinder, and RST-SST Soft Solids Tester Rheometers. Read More

Test & Measuring Instruments, Laboratory and Research Supplies & Equipment

Rugged Touchscreen Rheometers support 21 CFR compliance option.

February 28, 2014

Used for making rheological measurements, whether it’s single-point viscosity for QC or complete flow curve analysis for R&D, RST Series can perform viscoelastic modulus, yield stress, viscosity vs. shear rate profile, thixotropy calculation, creep behavior, recovery after flow, and temperature sensitivity tests. RST-CPS Cone Plate Rheometer, RST-CC Coaxial Cylinder Rheometer, and RST-SST Soft Solids Tester Rheometer operate in both controlled stress and controlled rate modes. Read More

Test & Measuring Instruments

Rotational Rheometers use optimized air bearing technology.

November 4, 2013

With optimized air bearing technology that reduces inherent torque bias, Kinexus pro+ and Kinexus ultra+ minimize data corrections and offer extended torque range. Instruments deliver characterization of dispersions, complex fluids, and soft solids in industries ranging from pharmaceutical drug development to food quality testing. Dual-action capabilities support advanced shear and vertical testing that enable detailed investigation of structural characteristics of dispersed systems. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers

Rheometer offers straight-forward, single-point operation.

March 27, 2013

Along with math models such as Power Law that can analyze data for flow index and other selectable variables, DV3T features 7 in. full color touchscreen that displays all test parameters along with measured values for yield stress, viscosity, and temperature. On screen graphing shows real-time test data, which can be captured in stand-alone mode, recorded on printer, or sent to PC. PG Flash Software, also included, is used for creating repeatable custom tests. Read More

Test & Measuring Instruments

Shear Rheometer works with low volumes, small surfaces.

October 24, 2012

Leveraging capabilities of Low Volume Measurement Cell, KSV NIMA Interfacial Shear Rheometer can measure shear properties of films with as little as 4.7 ml subphase. Instrument offers sensitive method with which to measure shear properties of films at fluid interfaces (gas/liquid and liquid/liquid) and is capable of simultaneously measuring viscoelastic properties and surface pressure. Low Volume Measurement Cell helps conserve time and expense when working with compounds and subphases. Read More

Test & Measuring Instruments

Pressurized Foam Rheometer meets oil and gas industry needs.

July 6, 2012

Used for studying foam rheology over range of qualities, shear rates, and shear stresses, Model 8500 incorporates pulse-free positive displacement metering pump, DP transducers, and coriolis mass flow meter. Fully automated closed loop system, capable of assessing foam rheology under extended pressure and temperature conditions, also includes software that lets operator automate system using schedules that define shear rates, sample test temperatures, and test segment durations. Read More

Test & Measuring Instruments, Laboratory and Research Supplies & Equipment

Thermorheograph is designed for food laboratories.

April 5, 2011

Farinograph®-AT incorporates 2 L, temperature controlled water tank and automatic water dosing system. Latter eliminates potential for operator error during addition of water to flour in mixer measuring head. Instrument records temperature of dosing water in water tank as well as temperature of dough in mixing bowl. Up to 20 Nm torque is suited when investigating speed profiles up to 200 rpm and calculating mixing energy for various applications. Read More

Test & Measuring Instruments

Powder Rheometer leverages uniaxial testing accessory.

December 21, 2010

When equipped with uniaxial powder tester, FT4 Powder Rheometer measures properties that directly correlate with powder's in-process behavior. Uniaxial testing specifically complements existing test methodologies for shear, bulk, and dynamic powder measurement. Integration of accessory and main unit results in production of homogeneous, uniform powder column for testing. Measuring normal stress required to fracture column directly identifies unconfined yield strength. Read More

Test & Measuring Instruments

USB-Enabled Rheometer operates stand-alone or via PC.

December 21, 2010

Featuring USB connectivity recognized by integrated Rheocalc and Rheoloader applications software, DV-III(TM) Ultra combines features of rheometer with yield stress measurement capability. All-in-one tool lets operator predict material's complete flow behavior. In stand-alone mode, operator enters test parameters, temperature control requirements, and starts program; results are displayed on built-in display. Also, built-in math models are provided for data analysis. Read More

Test & Measuring Instruments

USB-Enabled Rheometer offers yield stress measurement.

November 19, 2010

Featuring USB connectivity recognized by Rheocalc(TM) and Rheoloader software, DV-III(TM) Ultra lets operator predict material's complete flow behavior. All-in-one tool includes yield stress measurement capability as well as built-in math models for data analysis. In stand-alone mode, instrument requires operator to enter test parameters and temperature control requirements. Results are shown on built-in display, and optional software allows control of all rheological testing aspects from PC. Read More

Test & Measuring Instruments

Rheometer is suited for lab and field use.

April 30, 2009

Designed for use by multiple operators, rugged RS Portable Rheometer can operate in lab, on production floor using 115 or 230 V, or in field using built-in rechargeable battery pack. Coaxial cylinder rheometer is capable of viscosity, yield stress, and creep measurements and offers both controlled stress and controlled rate test modes. Unit comes with heavy duty lab stand and has convenient handle for moving instrument whenever necessary. Read More

Test & Measuring Instruments

Coaxial Cylinder Rheometer features portable design.

March 23, 2009

Capable of viscosity, yield stress, and creep measurements, RS Portable Rotational Rheometer can operate in lab, on production floor with 115 or 230 V, or in field with rechargeable battery. Built-in battery pack can be recharged by plugging instrument into power receptacle. Equipped with heavy-duty lab stand and handle, rheometer offers both controlled stress and controlled rate test modes. Cone/Plate Accessory is available for measuring small sample volumes. Read More

Test & Measuring Instruments

Capillary Rheometer features ergonomic design.

March 20, 2009

Designed to determine flow behavior and viscosity of high polymers, polymers, thermoplastics, and elastomers, single bore CR-6000 features all digital calibration and up to 50 shear stress or shear rate data points per test. It enables data collection through CPU, and is equipped with high temperature and pressure transducers coupled with servo motor and operating software. Unit's 25 piston speeds or melt pressures can be preset in either constant speed or constant pressure mode. Read More

Test & Measuring Instruments

Rotational Viscometer measures steady shear and yield stress.

November 26, 2008

With built in Peltier temperature control for all measuring systems, including cone and plate, parallel plate, and concentric cylinder systems, MERLIN viscometer performs both routine rheological tests, such as single point viscosity checks for QC, to complex rheological evaluations for R&D. Viscometer has angular velocity range from 0.01-200 rad/sec, torque range from 0.005-20 mNm, 5-85°C temperature range, and employs quick capture mounting technology. Read More

Test & Measuring Instruments

Capillary Rheometer can handle wide range of materials.

September 25, 2008

Including RheoSolve software, Model R6000 features H-Frame construction rated at 250 kN, with force drive capability of up to 100 kN and twin bores of 15 mm dia as standard. Both shear and extensional properties of specimens can be obtained, at rates representative of those encountered during normal processing, such as extrusion, injection molding, blow molding, and film blowing. Unit has backlit LCD display to show machine operating status and barrel temperature. Read More

Test & Measuring Instruments, Chemical Processing & Waste Management

Rotational Rheometer guides users through each step.

September 11, 2008

Offering sample preparation and loading, measurement set-up and operation, and data analysis and reporting, Kinexus delivers high performance measurement in complex materials such as particulate, macromolecular, and multiphase systems. It features applications-led interface, rSpace software, and rMotion drive. Kinexus pro is designed for routine and research applications, while Kinexus ultra suits low torque applications such as weakly-structured and small volume sample measurements. Read More

Test & Measuring Instruments

Rotational Rheometer offers intelligent operation.

September 11, 2008

Offered in Pro version that suits routine and research applications as well as Ultra version for demanding, low-torque applications, Kinexus has standard operating procedure-driven processes and applications-led interface that facilitats interaction. Adaptive intelligence actively guides users at every stage, and environmental controllers and geometries offer plug-and-play functionality. Other features include intelligent sample loading system and dynamically optimized motor. Read More

Test & Measuring Instruments

Rheometers are offered with tribology cell option.

September 5, 2008

Rheometers featuring normal force sensor, such as HAAKE MARS or HAAKE RheoStress 6000, and equipped with optional tribology cell are capable of analyzing bearing material tribological behavior. Cell consists of SS lower/upper measuring geometry. Lower is designed as reservoir and enables friction measurements of bearing materials with/without lubricant, while upper is equipped with flexible shaft to ensure concentric position of ball made of steel or other materials. Read More

Test & Measuring Instruments

Extensional Rheology System supports melts and semi-solids.

August 5, 2008

HAAKE RheoScope HT module features SER (Sentmanat Extension Rheometer) system that extends any conventional steady rotational rheometer into extensional rheometer, supports solid tensile testing, pear and peel testing, as well as friction testing, and covers operating temperature range from 0-250°C. Fully integrated into HAAKE MARS rheometer platform, it offers object lens, polarizor, and camera control, and online display of data, video sequences, and storage for later analysis. Read More

Test & Measuring Instruments, Materials & Material Processing

Measuring Mixer and Extruder System meets QC needs.

November 7, 2007

Available in table and floor models, HAAKE PolyLab QC enables QC staff to characterize sample's properties by gas flow, electric conductivity, or capillary viscosity measurements. Modular torque rheometer can be connected to interchangeable mixer, single-screw extruder, or conical twin-screw extruder. Offering backwards compatibility, existing measuring mixers and extruders can also be connected. System is controlled by HAAKE PolySoft software with Windows® look and feel. Read More