Test & Measuring Instruments

Electronic Micrometer offers 0.00016 in. accuracy.

May 7, 2015

Suited for general purpose measuring, Fowler Xtra-Value II features choice of measuring range and large LCD with inch/metric switchable resolution of 0.00005 in. and 0.001 mm. Unit is equipped with direct RS 232 output, absolute and incremental modes, and carbide measuring faces for wear resistance. For repeatability between users, ratchet thimble applies consistent force. Read More

Test & Measuring Instruments, Material Handling & Storage

Film Applicator utilizes digital micrometer heads.

May 14, 2014

With digital micrometer head, Digital Microm II Film Applicator provides 0.00005 in. digital graduations. Head features single value LCD with inch and metric readout, spindle lock to hold measurements in place, and satin chrome finish on thimble sleeve that helps resist rust. SPC output transmits results to computer or external device through interface cable. Read More

Test & Measuring Instruments

Compact Laser Micrometer has 46 mm measuring range.

April 9, 2014

Along with integrated controller, optoCONTROL 2520 features variable mounting distances from 100 mm to 2 m between transmitter and receiver. Measurement object can be placed anywhere within light curtain, up to 8 segments can be measured and output simultaneously, and smallest detectable object diameter is 0.5 mm. Ethernet/EtherCAT and RS422 interfaces are available, and real-time measurement chart displays diverse values. Averaging and filter methods and statistics features are standard. Read More

Test & Measuring Instruments

Multi-Axis Optical Micrometer supports high-speed operation.

February 19, 2014

With standard sampling rate of 16,000 Hz that virtually eliminates effects of target vibration on measurement value, LS-9000 series is designed to keep up with any production line while maintaining repeatability of 0.03 μm. Vibration isolation system within head protects against damage from vibration and impact, and design has no moving parts. Target monitor and tilt correction function lets users see position of target in measurement axis in real-time via integrated CMOS camera. Read More

Test & Measuring Instruments, Services

Biuret Micrometer helps monitor and maintain DEF quality.

February 13, 2014

Part of ACUSTRIP QA On the Spot program, Biuret Micrometer and process measures presence of Biuret in DEF. Users extract 1 ML sample of DEF, place it into meter, insert test strip into reservoir and move it back and forth for 10 seconds. After user presses read, meter displays 0, .1, .2, .3, .4, .5 or greater % showing that service is needed above .3% per ISO 22241. Field testing supported with laboratory analysis helps users maintain quality of DEF in supply chain and identify issues early. Read More

Test & Measuring Instruments, Vision Systems

In-line 2D Optical Micrometer offers multi-point measurement.

December 6, 2011

Combining functionality of laser scan micrometer, machine vision system, and optical comparator in single device, Model TM-3000 is available in 3 sensor head sizes and can utilize 2 transmitter-receiver pairs simultaneously. Because system works in 2 dimensions, it can measure up to 16 points within measurement area. In addition to 15 measurement modes and 8 auxiliary modes, device includes position correction function, which automatically orients test part prior to measurement. Read More

Test & Measuring Instruments

Inline, 2D Optical Micrometer delivers multipoint measurement.

December 1, 2011

Combining laser scan micrometer, machine vision system, and optical comparator, TM-3000 is compatible with 100% automated high-speed, in-line or off-line measurement and inspection applications. It is available in 3 sensor head sizes and can utilize 2 transmitter-receiver pairs simultaneously. System works in 2 dimensions, measuring up to 16 points within given area, and optimizes speed and precision via sub-pixel processing only in areas or points designated for measurement. Read More

Test & Measuring Instruments

Three-Axis Laser Micrometer features 30 mm measurement window.

October 13, 2010

Suitable for flaw detection, Triton331(TM) offers standard measurement rate of 4,800/sec with 12,000 measurements/sec available as option. Unit can accurately measure hexagonal or other product shapes that incur oscillation as well as non-constant diameter products, such as corrugated tubing. Via TLAser400(TM) micrometer interface card, device links to PC running Total Vu(TM) software, which provides in-process tolerance checking, trending, SPC, feedback control, data logging, and recipes. Read More

Test & Measuring Instruments

Electronic Micrometers measure from 0-4 inches.

September 23, 2010

Featuring IP67 level of protection against coolant, water, chips, and dirt, Series 795/796 includes LCD digital readout, tapered frame for accurate measuring, and no-glare satin chrome finish on thimble and sleeve. Series 795 additionally features RS232 output port for data transmission. Operating on two 3 V batteries, both provide automatic shut-off after 20 min, micro-lapped carbide measuring faces, inch/millimeter conversion, and ability to zero tool at any position. Read More

Test & Measuring Instruments

OTDRs certify LAN, campus, and WAN fiber networks.

September 4, 2008

Designed for installation/troubleshooting of fiber networks, 33-960 Series of Micro OTDRs have 33-962-1 video inspection probe, 1 button autotest function, and short attenuation and Event Dead Zones. They offer accurate characterization of connectors and splices. With 33-962-5 certifying OTDR option, units provide full certifying instrument with clear PASS/FAIL indications for every link. They are available as 850/1,300 nm (multimode) or 850/1,300/1,310/1,550 nm (multimode and single mode). Read More

Test & Measuring Instruments

Optical Micrometer System uses GaN LED and linear CCD.

November 10, 2004

With resolution of 0.01 µm and repeatability of ±0.06 µm, LS-7010 utilizes GaN LED light source with green 520 nm wavelength to produce continuous 6 mm wide beam with no gaps in target detection. Combined with high speed linear CCD, technology enables unit to sample targets at rates to 2,400 S/sec. Telecentric Optical System uses parallel light to form image, and CMOS camera mounted in receiver head provides image of target on controller. Read More

Test & Measuring Instruments

Laser Scan Micrometer performs up to 1,600 scans/sec.

September 17, 2004

Using multi-face polygonal mirrors, LSM-544 Series is available in models for use in applications from measurement of ultra-fine wires (0.005 mm dia) at resolutions to 0.01 µm to measurement of cylindrical workpieces as large as 120 mm. Available with integrated or remote displays, series comes standard with RS-232C interface and SPC output on most models. Dust- and splash-proof IP64-rated models are also available. Read More

Test & Measuring Instruments

Digital Micrometer is protected to IP65.

September 17, 2004

Suited for demanding manufacturing environments, Coolant Proof Micrometer features dust-tight, waterproof, sealed housing. Chip-proof unit can operate anywhere on production floor with accuracy to ±.00005 in. instrument error. LCD readout is visible even under difficult shop lighting conditions. Depending on model, product is equipped with SPC-output ratchet stop-, ratchet-friction thimble-, or friction thimble-adjusters. Read More

Test & Measuring Instruments

Digital Calipers/Micrometers offer water resistance.

September 16, 2004

Rated IP67, MarCal(TM) EW Digital Calipers feature resistant materials in casing and keyboard, and fluid protection system to safeguard electronic components. Offered in ranges from 6, 8, and 12 in., units include dirt wipers, lapped guide ways, and hardened stainless steel slide, beam, and measuring blades. Rated IP65, Digital Micrometer Models 16 and 40 EW feature satin chromed steel frames with heat-insulated holders, lapped carbide tipped anvils, rapid drives, and integrated ratchets. Read More

Test & Measuring Instruments

Micrometer measures depth of surface features.

June 4, 2004

Digital Optical Micrometer, Model 8400K evaluates severity of mechanical damage such as scratches, corrosion pits, or blemishes that are difficult to observe by other methods. User focuses on good surface near scratch or pit, sets display to 0.0000 in., then focuses into bottom of scratch or pit and reads depth on digital display. RS232 serial port allows data export to included processor/printer. Sealed, non-magnetic case is dustproof and shock-resistant. Read More

Test & Measuring Instruments

Thread Gages are suited for deep holes.

April 7, 2004

Able to be used at depths that exceed hole diameter, Multi-Ball(TM) products inspect screw threads for size, location, concentricity, or runout. Thread micrometer measures size, taper, and out-of-roundness of threaded holes for most sizes up to 1 in. dia. Location gage determines location/orientation of threaded hole axis using expanding pattern of balls that come into contact with thread flanks and automatically adjusts to hole size. Read More

Test & Measuring Instruments

Laser Micrometer System measures easily damaged parts.

November 29, 2002

LaserMicro100 measures outside diameters and dimensions of shafts, rubber rolls, and cylindrical parts. Able to be used as stand-alone measuring device or fully integrated into automated manufacturing line, unit has repeatability of ±0.2 µ at linearity of better than ±1 µ over its 0.02-4 in. measuring range. Non-contact, single-focused beam system is virtually unaffected by part surface variations. Unit accommodates serial port interface or Ethernet card. Read More

Test & Measuring Instruments

Measuring Heads suit tube, pipe, and profile production lines.

November 25, 2002

Using non-contact measuring technology, ODAC® measuring heads monitor OD, Out of Round Condition 24/7, and provide continuous information on overall performance of mill. Product diameters from .004-11.81 in. can be measured with repeatability up to ±.000008 in. Gauges are available in single plane or integrated dual-plane X-Y versions. Air curtains, cooling blowers, and enclosures protect units, hardening them to withstand adverse mill conditions. Read More

Test & Measuring Instruments

Optical Micrometer uses built-in CMOS camera.

November 13, 2002

LS-7030M Optical Micrometer makes high-speed measurements of fast moving targets on production and assembly lines via high-intensity, low-noise GaN LED light source. It generates continuous 30 mm wide beam with no gaps in detection due to scanning. CMOS camera in receiver head of Optical Micrometer provides image of target on Controller Monitor. Unit provides 2400 samples/sec, display resolution of 0.01 microns and repeatability of 0.15 microns. Read More

Test & Measuring Instruments

Gages simplify threaded hole inspection.

October 31, 2002

Multi-Ball(TM) thread-inspection products allow hardened balls to be used as thread-flank contact elements. Free-floating balls can be positioned at any location on thread. Turning of knurled thimble or pin expands balls into contact with thread flanks. Multi-Ball(TM) micrometers measure size, taper, and out-of-roundness of threaded holes. Multi-Ball(TM) location gages determine location and orientation of threaded hole axes and automatically adjusts to varying hole sizes. Read More