Lion Precision Inc.
St. Paul, MN 55126 7014
Sep 05, 2008 Available in 0.020-0.6 in. ranges, Model ECL202 eddy-current displacement/position sensor offers thermal stability and immunity to EMI. Internal calibration tables of tens of thousands of points assure precise linearity. Housed in DIN rail mount package, sensor offers user-selectable bandwidth of 100 Hz, 1 kHz, 10 kHz, and 15 kHz, plus resolution as low as 0.008% at 10 kHz. Digital circuitry is immune to drift associated with analog circuitry.

Magnetic Analysis, Corp.
Mount Vernon, NY 10550-4403
Feb 20, 2008 MultiMac(TM) operates with encircling/sector test coils for detecting short-surface defects and/or rotary test probes for identifying long, seam-type surface defects. Test Screen displays single channel, and Multi-Screen provides simultaneous display of 1-8 channels. Each channel can be individually configured with different frequencies and channel modes. Along with end-suppression circuitry, systems offer recording capability and remote access via in-plant network or Internet.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
Jul 07, 2005 Vector 22 provides in-line and off-line operation in applications from manual inspection to integration in systems with robotic manipulation of product and probes. Suitable for rack- or bench-mounting, mains-operated unit can operate in dual-frequency mode through single input as well as drive 2 probes at 2 separate frequencies and in 2 different modes. Users can save up to 50 traces and 50 settings, and 6 analog outputs enable information download to data logger or PC.

Uson L.P.
Houston, TX 77041
May 16, 2005 Combining eddy current technology with custom fixturing, Sorter provides 100% on-line inspection and sorting of small metal parts. Zetec MIZ23 eddy current tester compares electromagnetic properties of sample with results obtained from testing known good parts. Input/output of Zetec MIZ23 operates flippers on sorter according to test results, which divert defective parts to reject bin. Accuracy is unaffected by orientation of parts entering sorting station.

GE Inspection Technologies, GmbH
Huerth 50354  Germany
Apr 01, 2005 Dual-frequency Vector 2d offers single-page set-up menu and 6 soft keys for programming of parameters. Filter prevents long-term spot drift caused by changes in parameters and eliminates interference. During crack detection or hardness sorting, output of unit can activate paint marking system, alarm signal, or accept/reject gate. Vector 2d provides real-time display of all inspections, and can save up to 50 traces and 50 settings internally.

Uson L.P.
Houston, TX 77041
Feb 07, 2005 Zetec InSight CT Eddy Current Crack Tester provides non-destructive detection of cracks or imperfections in critical components at production line speeds. It supports up to 8 dual frequency probes working from 5–10 MHz with sampling rate up to 10,000 samples/sec. Unit can communicate with other machinery via built-in industrial I/O. Data can be downloaded via RS232 serial port, Ethernet connection, or to USB media storage devices, all standard features.

Uson L.P.
Houston, TX 77041
Sep 02, 2004 Offered in 2, 4, and 8 coil versions, multi-channel InSite-HT verifies hardness of metal parts and detects flaws such as cracks or defective threads in automotive and industrial applications. Multi-frequency tester performs non-destructive testing at production line speeds, while menu-driven display guides users through programming stage. Product has one tolerance zone for signals on each test channel, and up to 64 alarm channels can be active.

Uniwest
Pasco, WA 99301
Oct 31, 2003 Model US-454M multi-channel, eddy current inspection instrument can be configured as 1 channel with 4 frequencies, 2 channels with 2 frequencies per channel, or 4 channels with 1 frequency per channel. Encoder knob enables technician to scroll through menus and select testing parameters. Four function keys allow set up of repetitive inspection criteria such as gain, frequency, rotation, and filters. Internal memory stores up to 100 test setups.

Uniwest
Pasco, WA 99301
Sep 17, 2003 MicroOptical Instrument Viewer connects directly to video input, allowing technicians to see part they are inspecting and eddy current screen simultaneously. Small monitor attaches to safety or standard glasses for hands-free capabilities, enabling inspectors work comfortably without turning their heads. Applications include aerospace, power generation, NDT inspection, and manufacturing.

Zetec, Inc.
Issaquah, WA 98027 0140
Sep 11, 2003 Eddynet Inspection Management System - Balance of Plant (EIMS-BOP) organizes, tracks, and creates reports of eddy-current inspections of heat exchangers in balance-of-plant applications. Software, with tubesheet builder, aids users in building maps of tubesheets, planning their inspection, and managing analysis results. Single relational database stores all inspection information from test plans to analysis results. Software handles unlimited individual test plans.

Magnetic Analysis, Corp.
Mount Vernon, NY 10550-4403
Aug 25, 2003 Varimac V tests metal parts, bar, wire, and tubing for variations in physical characteristics such as alloy, hardness, case depth, and heat treatment. Selective circuits optimize differentiation between signals for wanted and unwanted conditions. Frequency range of 100 Hz to 2 MHz enhances selectivity, while 20 GB hard drive handles all data storage for setups and reporting. Testing can be observed on remote monitor without going out to plant floor.

Zetec, Inc.
Issaquah, WA 98027 0140
Aug 13, 2003 By combining features of PM-3A Controller, HS MRPC® Controller, and two 10D Probe Pusher Power Supplies, modular Dual Probe Control System streamlines eddy current testing for cracks and flaws. Product supports up to 2 MRPC Motor Units at 2,400 rpm. Tubular Drive Unit System is designed to extend through square bends in steam generator tubing. Drive shaft resides within solid nylon, pushable extension shaft.

Staveley Instruments, Inc.
Kennewick, WA 99336
Aug 01, 2003 Weighing less than 4 lb, 1000S+ Series is offered in 3 NDT disciplines: ultrasonic (Sonic), eddy current (Nortec), and composite testing (BondMaster). Each device is offered with VGA output that provides for external remote display capability and allows for addition of customer-interchangeable color LCD. Additional interchangeable displays consist of monochrome liquid crystal or hi-brite electroluminescent.

Lion Precision Div. Of AQT Inc.
St. Paul, MN 55126 7014
Jul 10, 2003 Suitable for ferrous and nonferrous targets, ECA100 non-contact displacement measurement system utilizes driver that provides 0–10 Vdc, repeatable, analog output voltage with user-adjustable zero and gain. Installation and setup are achieved via multi-color LED probe position indicator. Specifications, based on 4140 target, include 10 kHz frequency response and 0.005% FS resolution. Unit measures 2.95 x 0.89 x 4.23 in.

Uniwest
Pasco, WA 99301
Jun 10, 2003 Built with proprietary US-454 EddyView™ eddy current inspection instrument, product uses transport system that allows different diameter roller bearings to be inspected by changing hoppers and chutes. Bearings are individually selected in hopper and transported by gravity to inspection station. Assembly continuously rotates bearing while eddy current probe indexes its length. After inspection, assembly arm transports bearings to appropriate defective/defect-free bin.

Magnetic Analysis, Corp.
Mount Vernon, NY 10550-4403
Jun 04, 2003 ROTOMAC® 9 rotary test system detects long, seam-type defects in wire, tubing, and bar stock. Real-time, flat-panel color display shows waveforms, reflecting true phase and amplitude. Oscillating frequency range of 50 KHz to 1 MHz, combined with high-frequency capacity rotary mechanism and test probes, allows detection of defects as shallow as .001 in. deep. Digital electronics and flaw-verify feature permit differentiation between defect signals and unwanted signals.

Lion Precision Div. Of AQT Inc.
St. Paul, MN 55126 7014
Mar 12, 2003 With selectable frequency response to 80 kHz, ECL100 driver's linear voltage and current outputs provide precision measurement throughout probe's calibrated range. Low noise circuit design yields static resolution of 0.004% FS output. Multi-color LED probe position indicator and local/remote zeroing capability facilitates installation and setup. It is offered with 3, 5, 8, and 12 mm Modular Inductive Probes.

Uniwest
Pasco, WA 99301
Feb 27, 2003 Automated Model ETC-2000 includes capabilities for inspection of turbofan components such as bores, webs, broach slots, boltholes, blades, and scallops. Using proven scan plans, inspection capabilities include Edge Neglect, Auto Calibration, Return-to-Indication, and Find X, which locates specific surfaces and stops. Software Enabling allows off-line personnel training and analysis of data, while Windowing provides defect isolation and identification.

Zetec, Inc.
Issaquah, WA 98027 0140
Nov 15, 2002 Model MIZ®-70 Eddy Current Instrument supports up to 32 frequencies during data acquisition and offers sample rates up to 16,000 samples/sec. Comprised of CPU, frequency synthesizer, and analog processor, it performs all necessary testing functions, including frequency generation from 10 Hz to 10 MHz. Its 10/100BaseT network interface provides data communication between the MIZ-70 and HP workstation, while software provides simultaneous control of up to 4 probes.

Zetec, Inc.
Issaquah, WA 98027 0140
Aug 08, 2002 MIZ®-21SR Multimode Tester combines eddy current and bond testing in single unit. It detects fatigue cracking, corrosion, and heat damage. MIZ®-21B Eddy Current Tester can store and recall up to 50 test configurations. User can choose 1 or 2 of 7 different eddy current display modes for clear analysis of inspected area. S-21R Bond Tester offers sondicator and resonance modes. Sondicator mode tests for disbonds or delaminations. Resonance mode provides thickness checks.