Extech Instruments Corp.
Waltham, MA 02451 1020
May 06, 2008 Including Models EX612, EX613, EX622, and EX623, EX600 Series True RMS Clamp Meters feature IR thermometer for locating hot spots and NCV and dual thermocouple inputs for T1, T2, and T1-T2 differential temperature measurement. With 1.4 in. jaw opening for conductors up to 500 MCM, units provide 40,000 count clamp meter functions for dc voltage, resistance, capacitance and frequency, and can measure motor capacitors to 40,000 µF. Models EX613 and EX623 also provide dc current function.

Omega Engineering, Inc.
Stamford, CT 06907
Apr 29, 2008 Including front keypad for input and speech mode selections as well as volume control, OMEGASAYS® UV1000 measures 0-10 Vdc voltage, 0-20 mA current, and Type K thermocouple inputs, and verbalizes them in any range with over 100 built-in engineering units. Battery powered and CE compliant unit can be configured for input range, engineering units, and high/low alarm set points. Multimeter is suited for chemical, automotive, HVAC, and paper industries.

Murata Power Solutions, Inc.
Mansfield, MA 02048
Apr 17, 2008 Available in 5 models, ACA-20RM Series provides direct measurement of true-RMS values of non-sinusoidal ac currents from 2-50 A. Self-powered, single-board modules offer choice of either 120 or 220 V nominal operation. Consuming less than 50 mA and operating from 0-60°C, meters include red LED displays with 0.37 in. high characters, precision auto-zeroing circuitry, RMS-to-DC converter circuit, and built-in bezel/filter assembly with metal fasteners.

Fluke Corp.
Everett, WA 98203
Apr 08, 2008 Fluke 113 Utility Multimeter includes VCHEK(TM) LoZ low impedance measurement function that allows users to simultaneously test for voltage or continuity. Min/Max function lets operator record signal fluctuation. Device can also perform diode tests and provides both auto and manual ranging capabilities. It is compliant with CAT III 600 V and CAT IV 300 V standards and includes backlit display, holster with probe holders, TL75 test leads, and 9 V battery.

Krohne, Inc.
Peabody, MA 01960-3803
Mar 11, 2008 Intended for heavy industrial and hazardous environments, OPTISONIC 6300 covers entire pipe diameter range from ½-160 in. It includes integrated display that allows signal quality to be shown in real-time during calibration of signal transducer. Protective casing withstands everything from aggressive vapor and dust to mechanical damage and solar radiation. Casing also helps minimize maintenance by protecting grease that allows signal transducer to cling to tube wall.

Ideal Industries, Inc.
Sycamore, IL 60178
Oct 12, 2007 Equipped with Inrush feature, TightSight(TM) Clamp Meters can measure starting current on motor. Units include backlight for all functions, selectable audible Hi-Voltage warning feature, and data hold button guard, which minimizes accidental depressing of button while clamping onto conductor. Display stabilizes close to zero before taking measurement as meter defaults to 0.0 V resolution.

Yokogawa Corp. Of America, Meter & Instrument Div.
Newnan, GA 30265
Aug 23, 2007 Contained in NEMA4x 1/8 DIN package, Y800plus meters measure AC/DC voltage and current, RTD, thermocouple, load cell, and process signals. Products can also be used as controllers via modular dual-channel relay and analog output option boards. Along with universal power supply, features include auxiliary excitation outputs and digital inputs. Accuracy on DC voltage and current meters is ±0.01% FS ±2 counts, and AC units feature true RMS measurements with accuracy of ±0.15% FS.

Extech Instruments Corp.
Waltham, MA 02451 1020
Apr 30, 2007 Suited for installation and repair of electrical systems, HVAC equipment, and large appliances, Model TK430-IR Industrial Troubleshooting Kit measures 9.5 x 6.8 x 2.8 in. It comes with Model EX430 True RMS autoranging digital multimeter, Model MA200 400A AC clamp meter, 42510 mini IR thermometer, 40130 non-contact voltage detector, set of CAT III-1000V test leads, Type K thermocouple bead probe, Type K banana input adaptor, multimeter hanging strap, and batteries.

Red Lion Controls
York, PA 17402 9428
Oct 27, 2006 Offering 0.46 in. digits and user-selectable bright red or green LED backlighting, CUB5 Series operate on 10-28 Vdc power supply. CUB5ID dc current meter offers 4 current ranges and maximum input of 199.99 mA, while CUB5VD dc volt meter has 4 V ranges and maximum input of 199.99 Vdc. CUB5P process meter accepts processing signals and displays them in desired display readout, and CUB5RT and CUB5TC accept inputs from RTD and thermocouple sensors, respectively.

Megger
Dallas, TX 75237-1017
Oct 25, 2006 Intended for power utilities, Series MDP provides information to evaluate loading on feeders/overhead lines and to identify needed upgrades. Customers can record currents up to 1,000 A, with additional 200 A over-range. All 3 models offer wide range of data retrieval options and virtually unlimited data recording. Software provides waveform capture and harmonic analysis up to 32nd order, individual harmonics, THD, frequency and imbalance charting, and variety of analysis reports.

Laurel Electronics, Inc.
Costa Mesa, CA 92626
Oct 02, 2006 Laureate Model RMS 4½ digit meter provides 0.15% full scale accuracy for ac voltage or current signals from 10 Hz to 10 kHz. It offers 5 ac RMS voltage ranges from 200 mV to 300 V full scale and 4 ac RMS current ranges from 2 mA to 5 A full scale. High common mode rejection allows stable readings with current shunts located on high side of line, while 5 A input capability with 10 mW current shunt allows output of 5 A current transformers to be applied directly to meter.

Flow Technology, Inc.
Phoenix, AZ 85040
Sep 25, 2006 Designed with solid-state technology, Model SLF-500 Ultrasonic Liquid Flow Meter measures flows through metal, plastic, and lined pipes without intruding into process line. It employs DSP techniques for accuracy and ±0.2% repeatability, and can be used on line sizes from 1-12 in. without recalibration. With no pressure drop and no moving parts, clamp-on unit finds applications in corrosive chemicals in process industry and fluids in sanitary industry.

Fluke Corp.
Everett, WA 98203
Aug 01, 2006 Designed to measure ac voltage and current, Fluke 902 HVAC Meter also incorporates 80BK DMM temperature probe. Meter clamps to 750 MCM dia wire and has integrated low pass filter to detect voltage output of variable frequency drives. Allowing technicians to troubleshoot and repair heating, ventilation and air conditioning systems, meter can be used to capture flue gas temperature, conduct flame rod testing, and measure start and run motor capacitors.

Hoyt Electrical Instrument Works, Inc.
Penacook, NH 03303 8798
Apr 06, 2006 Suited for use in harsh environments, 5000 Series monitors from PLC or transducer and requires no power. Gasket sealing design allows for quick modification and scale changes while maintaining instrument integrity. Made with UL 94V material, series is available in custom scales and features dustproof Lexan® construction. Accuracy on all dc and ac versions is ±2% of FS. All meters are 2,600 V RMS with 90° rotation and meet ANSI Specifications C39.1.

Aphel Technologies
Hubbardston, MA 01452
Jan 25, 2006 Featuring 8-channel, auto-scrolling capability, rPower RS232-enabled meter provides remote monitoring for 20-60 A (125/208 V) rackmount enclosure power solutions. It offers high-resolution color display that can be viewed from as far as 12 ft or through enclosure door perforation. Device connects to console port switches and can be managed simultaneously with other RS232 based devices.

Meterman Test Tools
Everett, WA 98206
Oct 13, 2005 Compact AC50 measures AC currents to assess ground conductors for leakage current down to 10 µA. Able to conduct test measurements in tight working spaces, it also offers resistance measurement, continuity beeper, as well as Min/Max and relative-value measurements. Along with 1.3 in. jaw opening, product features Data Hold feature, optional built-in analog bargraph, and Auto Power-Off mode. Unit measures AC current to 60 A AC and AC voltage to 400 V.

Ideal Industries, Inc.
Sycamore, IL 60178
Aug 16, 2005 Accommodating cable or rods up to 1.25 in. Series 920 includes backlit LCD that can be read in virtually any lighting condition. Jaws clamp around ground rod for direct reading of ground resistance from 0.01–1,500 Ω and direct measurement of ground leakage current up to 15 A. Meter requires no leads, auxiliary rods, spacing provisions, or disconnecting of ground rod. Safety rated to CAT III 300 V, unit includes auto power off, noise check, and Data Hold.

Megger
Dallas, TX 75237-1017
Jul 21, 2005 MMC850 Multi-core ac digital clamp meter features design that eliminates need to split cable, remove panels or open outlet boxes to access single conductors. Planer magnetic sensor coils calculate current in flat or round multi-core cable to 100 A. Meter features backlit display, positive finger guard for comfortable grip, and inner jaw clamp to centralize cables. Unit suits electrical installation and maintenance, testing, and commissioning.

AEMC Instruments
Foxborough, MA 02035
Mar 29, 2005 TRMS Model 565 measures leakage current up to 600 mA, with up to 10 µA resolution, on ground conductor or through vector sum on multi-conductors. Low currents are measured using 60 and 600 mA ranges, and all measurements are displayed on 4-digit backlit LCD. Sensitivity of probe (10 and 100 µA) is made possible via jaw construction, which accommodates up to 1.1 in. dia conductors. Meter measures to 100 Arms as well as Vac and Vdc, resistance, and continuity.

Extech Instruments Corp.
Waltham, MA 02451 1020
Dec 15, 2004 Each 1,000 A clamp incorporates built-in, non-contact IR thermometer with laser pointer to monitor temperature and locate hot spots on motors and electrical devices. Unit also features min/max, data hold, and auto ranging features. Both series feature 4,000 count, backlit LCD and ergonomically designed, double-molded housing. Meters measure resistance, capacitance, frequency, and continuity. Peak Hold function captures inrush currents and transients.