Atmel Corporation    San Jose, CA 95131
Mar 06, 2013 As 2.4 GHz IEEE 802.15.4 radio transceiver, AT86RF233 supports distance measurement between 2 radios (ranging). Integrated technology, combining wireless sensor networks with real-time location (RTLS) capabilities, uses measurement of phase differences between radio signals and enables items to be tracked within wireless network for industrial and consumer applications.

Klein Tools, Inc.    Lincolnshire, IL 60069
Dec 11, 2012 Helping to ensure compliance, VDV Distance Meter measures voice, data, video, doorbell, siamese, lamp-wire, and NM cables up to 1,500 ft. Unit has 6 pre-programmed nominal cable length constants for RG59, RG6, and RG11 coaxial as well as Cat3, Cat5e, and Cat6 twisted pair. User can adjust capacitance/ft constant based on cable being tested. In addition, tester identifies cable runs outside specification and determines if cable run is broken or damaged.

Klein Tools, Inc.    Lincolnshire, IL 60069
Oct 10, 2012 Utilizing time domain reflectometry spread spectrum technology, Ranger™ TDR Kit measures voice, data, video, doorbell, siamese, lamp-wire, and NM cables up to 3,000 ft without interference. Fault finder determines if cable run is broken or damaged, while tone generator, featuring 4 tone cadences, identifies and traces cable. With single tool, professionals can confidently determine status of each wire in data, power, or communications/video system.

Trimble Navigation Limited    Sunnyvale, CA 94085-3913
Aug 13, 2012 Combining laser receiver, laser distance meter, and built-in tilt sensor, Spectra Precision® DR400 DigiRod(TM) provides information required to take rod-less grade readings, even at tilt angles up to 30°. Various grade rods can be emulated including direct elevation rods, cut/fill rods, and indirect reading rods. Receiver has 5 in. vertical reception range that does not require centering on-grade to obtain reading. As stand-alone distance meter, DigiRod can measure up to 160 ft with ±1/16 in. accuracy.

TR Electronic, Inc.    Troy, MI 48083
Jun 11, 2012 ProfiNET LE-200 laser distance measurement system provides communication option for users looking for real-time, closed loop distance feedback application solutions. Incorporating phase-shift differential technology, unit delivers accurate (±2 mm) and reliable positioning technology over 0.2-240 m range. Cooling and heating options are available for extreme environments, and other available protocol options include EtherNET/IP, DeviceNET, Profibus, Interbus, and CAN.

Calculated Industries, Inc.    Carson City, NV 89706
Aug 24, 2011 Accurate to 99.0%, Laser Dimension Master II enables one person to make room measurements up to 50 ft within seconds. Ultrasonic device measures 5 in. long, comes in zipped protective cover, and has built-in laser aimer/pointer. For operation, user presses button and aims laser at wall or surface. After 2 beeps, measurement is displayed in feet-inches or meters on backlit LCD. Potential users include appraisers, estimators, contractors/builders, designers, remodelers, and DIYers.

CorDEX Instruments Ltd.    Scarborough YO139QD  United Kingdom
Jan 06, 2011 Certified for ATEX and IECEx Zone 1 IIC T4, LaserMETER 3000XP accommodates needs of maintenance, operations, and safety personnel working in hazardous environments. Elements of construction include cast aluminum chassis and toughened safety glass doubly encased in anti-static overmold. Large, raised buttons and touch controls accommodate users wearing required safety clothing, and on-board mathematics enable user to calculate volume, area, and Pythagoras' theorem while in field.

L.S. Starrett Company    Athol,, MA 01331
Sep 28, 2010 Available in 2 models, Automotive Inspection Sets help mechanics measure proper distance or alignment between parts in tightly confined spaces. Model S898Z-1 combines pliers, Flex-O-Post, dial indicator with .001 in. grads and 1 in. travel, and fitted plastic case, while Model S898Z-2 additionally includes magnetic base. Both are suitable for measuring amount of front-end play or ball joint wear, as well as checking part movement associated with other applications.

Bosch Production Tools    Mount Prospect, IL 60056
Jul 21, 2010 Capable of measuring in 11 different modes, Models GLR825 and GLR500 provide measurement ranges of 825 and 500 ft, respectively, with accuracy to within 0.04 in. Measurements can be made from front or back of unit, from integrated tripod mount, or from multi-functional extension pin. Both instruments feature glass lens, ceramic optics carrier, rubber-padded surfaces for secure grip, and IP54 protection against dust and water. To keep track of data, both tools can store up to 30 measurements.

Bosch Production Tools    Mount Prospect, IL 60056
Jul 07, 2010 Able to fit in pocket or tool pouch, GLR225 can perform various interior and exterior distance measuring tasks from up to 230 ft and with 0.06 in. accuracy (at 33 ft). Functionality allows measuring from 4 distinct reference points - front or back of laser, 1/16 in. threaded tripod mount, or swing-out extension pin - as well as calculation of measurements in 7 different modes. Results can be shown in inches, feet/inches, decimal feet, and metric.

Extech Instruments Corp.    Nashua, NH 03063
Mar 25, 2010 Equipped with backlit, 3-line display, Model DT300 measures targets up to 164 ft away with 0.06 in. accuracy. Pro-grade pocket-sized meter offers min/max readings, indirect Pythagorean calculations from 2 or 3 other measurements, 20-reading memory, addition and subtraction functions, and auto-off. Featuring IP54-rated, dust-proof and water-resistant design, meter enables users to measure distances, compute area and volume, and measure angles.

TR Electronic, Inc.    Troy, MI 48099
Aug 06, 2009 Ethernet/IP LE-200 Laser Distance System incorporates phase-shift differential technology for optimized accuracy and reliability. It is also available with Profibus and CAN interfaces in addition to various operating distances as well as cooling and heating options. Applications include loop control, coil diameter measurement, automated warehousing, level and material control in silos, crane positioning, and general material handling of parts or containers.

TR Electronic, Inc.    Troy, MI 48083
Feb 10, 2009 Cascading Linear Measurement System, LMC-50, consists of IP65-rated interconnected linear transducer modules in profile housing. Modules can be connected together across entire measuring distance, providing seamless measuring system, and are maintenance-free. Communication standards such as Ethernet/IP, Profibus, and CAN are available for integration.

Fluke Corp.    Everett, WA 98203
Sep 02, 2008 Suited for electricians, facilities managers, and HVAC contractors, Fluke 416D and 411D Laser Distance Meters feature one-hand operation, large LCDs, and automatic shut-off. Fluke 411D measures up to 100 ft with accuracy of ±0.12 in., and provides 3,000 readings from pair of AAA batteries. Measuring up to 200 ft with accuracy of ±0.06 in., Fluke 416D offers 5,000 readings from pair of AAA batteries, 3 line backlit display, memory for saving 10 measurements, and IP54 splash/dust protection.

Hilti Inc.    Tulsa, OK 74121
Mar 03, 2008 With sensor-automated backlight and one-button operation for both measuring and tracking functionality, PD 4 Laser Range Meter measures distances with laser precision of ± 1/12 in. from 7.8 in. up to 230 ft. Rubber protection surrounds edges of meter, creating dust-tight, water-resistant casing. Requiring only one person to operate, Model PD 4 can safely measure in places where access is difficult.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Dec 05, 2007 Designed for measuring forces and moments on tires for trucks and other heavy goods vehicles, RoaDyn® S6HT TT (Tire Testing) is rotating 6-component measuring system for wheel and tire test that can be used like measuring hub. It offers measuring range of up to 220 and 100 kN in radial and axial direction, respectively. Modified outer part with different bolt patterns and adapter flange allows standard wheels to be mounted.

Hilti Inc.    Tulsa, OK 74121
Aug 07, 2007 Working from single location, PD 40 and 42 enable user to measure distances from 2 in. to 650 ft, as well as areas and volumes. Model PD 42 stores last 30 distance measurements or last 5 function results. It features area, volume, min/max, painter's area, timer functions, and Pythagorean functions, as well as vertical and horizontal bubble level and side measuring key. Built in optical sight offers targeting aid in bright outdoor conditions where laser dot is difficult to sight.

RLE Technologies    Fort Collins, CO 80524
Aug 01, 2007 Configurable with up to 12 virtual zones, SeaHawk LD5100 determines location of any conductive fluid on up to 5,000 ft of SeaHawk Leak Detection Cable to within ±2 ft. Thresholds for leak, delay, and contamination alarms are adjustable, and solution integrates with existing building/network management systems. After conductive fluid comes in contact with cable or SeaHawk zone spot detectors, system pinpoints location of leaks, annunciates alarm, and displays distance on backlit LCD.

Laser Technology    Englewood, CO 80112
Jun 28, 2007 TruPulse® 360 includes inclinometer, distance laser, and compass that delivers mapping-grade accuracy and ability to shoot from any angle. Internal circuitry provides 3-axis monitoring of earth's magnetic field and uses TruVector(TM) compass technology and calibration algorithms to produce azimuth accuracy regardless of instrument's orientation in physical space. Reflectorless laser rangefinder is suited for telecom, utility transmission and distribution, and GIS professionals.

Riegl USA, Inc.    Orlando, FL 32819
May 24, 2007 With 200 kHz measurement rate and ±2 cm accuracy, LMS-Q560 offers access to detailed target parameters by digitizing echo signal online during data acquisition and through off-line waveform analysis. Class 1 eye-safety allows operation at any altitude, and opto-mechanical beam scanning provides linear, unidirectional, and parallel scan lines. Able to integrate with GPS and INS systems, solution makes use of time-of-flight distance measurement principle with nanosecond IR pulses.