Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
May 23, 2012 Offered in 3 types, CUI Corrosion Monitoring Sensors may be customized to meet requirements. Continuous Insulated Braid Wire Sensor, using insulated carbon steel wire as corrosion fuse, detects corrosion over large area. Inserted Probe Array Sensor acts as corrosion fuse detector that provides indication of corrosion occurring at pipe surface. Consisting of individual electrical resistance probe, CUI Corrosometer® Probe measures corrosion rate near pipe surface and helps determine underlying cause.

CorDEX Instruments Ltd.    Scarborough YO139QD  United Kingdom
May 09, 2012 Used for non-destructive testing to establish extent of corrosion, intrinsically safe UT5000 uses Echo-Echo technology to read metal thickness levels even through painted surface. Intelligent measuring technology can record multiple readings at specific locations, and total of 9 multi-point readings can be saved against each RFID tag on asset or pipeline. Dual-element, 4 MHz transducer is adjustable up to 10 Hz and offers accuracy of ±0.05 mm.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Nov 22, 2011 Constructed of corrosion-resistant 17-4 PH SS, DCMS(TM) uses Corrosometer® electrical resistance corrosion probe element to determine rate of metal loss within downhole tubing. Tubular electronic instrument automatically reads and records corrosion probe at regular user-defined intervals. Upon retrieval of Downhole tool, corrosion rate history is downloaded to PC via Corrdata® II Software. Designed to withstand temperatures to 302°F and pressures to 10,000 psi, unit offers 90-day battery life.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Jun 18, 2010 CorrTran® AQUA monitors water and wastewater processes for general and localized corrosion, enabling users to determine effectiveness of corrosion inhibitors. It also enables users to detect and correct corrosion issues for preventative maintenance. When measurement cycle is complete, corrosion rate and pitting value are calculated and relayed to plant personnel as 4-20 mA HART signal. System includes main unit, 100 psi working pressure probe, 10 ft cable, and steel or copper electrodes.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Jul 06, 2009 Ensuring piping assets are monitored against underprotection from corrosion damage, Cosasco® Side-Stream Assembly monitors parameters such as metal loss, corrosion rate, erosion rate, pressure, temperature, flow, and bacterial activity. Multiple 1 in. tees are included, which can be configured with Microcor® corrosion/erosion rate measuring, Corrater® LPR and galvanic measuring, Bio-probes, and process parameter measuring systems. Corrosion/process data is provided within minutes.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
May 05, 2009 Microcor Wireless Transmitter uses high-resolution metal loss measurement that provides 18-bit resolution and is rated for operation in hazardous locations in temperatures from -40 to +70°C. Based on Microcor® technology, unit provides accurate corrosion rates in any process media in real-time. Each device will work as node in self-organizing mesh network to ensure consistent delivery of data and provides adaptive solution for data transfer.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Apr 27, 2009 Available with Hazardous Area Certification, Microcor® Wireless Transmitter provides corrosion rates in any process media at speeds approaching real time. Unit uses high-resolution metal loss measurement, providing 18-bit resolution and operating from -40 to 70°C. Transmitter works as node in self-organizing network to ensure consistent delivery of data. In event temporary obstruction blocks direct connection, network automatically reroutes signal to adjacent device.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Nov 13, 2008 Suited for small scale systems or as building block to full ICMS3 Corrosion Management System, Intelligent Interface Unit provides real-time corrosion rates, erosion rates, and pitting tendency in water systems. System integrates RCS digital Microcor, Quicksand, and Corrater corrosion monitoring transmitters to or through SCADA or DCS system. With Symantec PC Anywhere or Microsoft remote desktop, users can access data systems for configuration and graphical interface remotely.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Oct 20, 2008 Using Soil Corrosion Rate Monitor, pipeline operators can quantitatively determine soil corrosivity for External Corrosion Direct Assessment pre-assessment process at time of pipe excavation or inspection. Unit consists of soil corrosion rate probe with replaceable cone shaped tip, and electrochemical Corrater® Aquamate LPR instrument, which includes Solution Resistance Compensation to extend range of soils in which measurements can be made.

Roctest, Ltd.    Saint-Lambert, QC J4P2P4
Sep 29, 2008 Designed to detect and predict onset of steel corrosion in concrete, SensCore system consists of sensors, dataloggers, and measurement hub that concentrates data from several dataloggers and transmits it to central database. Sensors transmit their data wirelessly to measurement hub, eliminating need to install any wiring in the structure to be monitored. Modular system is adaptable to structures of all sizes, and can be installed in both new and existing structures.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Sep 12, 2008 Complementing CorrTran® MV online corrosion monitoring transmitter, Division 2/Zone 2 CorrTran® Corrosion Data Logging System allows users to access real-time corrosion data via Ethernet, USB, SD card, or locally via videographic chart recorder. System includes KFD2-HLC-EX1.D HART loop converter, which receives HART data from CorrTran MV corrosion monitor and delivers three 4-20 mA outputs that represent general corrosion, localized corrosion, and conductance.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 16, 2004 CorrTran Transmitters satisfy Class I, Division 2 hazardous location applications. They allow users to monitor effectiveness of corrosion inhibitors online, and detect and correct corrosion issues through upkeep and preventive maintenance. Units feature 2-wire, loop-powered 4-20 mA signal with HART protocol. Through these signals, general corrosion or pitting of pipe or vessels can be detected. Various probe styles and materials are available.

USFilter's Stranco Products    Bradley, IL 60915 0389
Jun 07, 2002 CoolSIM(TM) on-line cooling water management tool measures electrochemical noise that takes place with transfer of electrons that create corrosion. This allows facilities to monitor system corrosion, pitting, and fouling in real time, under actual flow and heat transfer conditions, and therefore optimize chemical treatment programs. It recognizes when corrosion and pitting begin to occur in heat exchanger, and when corrosion and pitting activity stop.