Beckhoff Automation LLC
Minneapolis, MN 55337
Jul 01, 2008 Suitable for drives with quadratic load characteristics such as fans and pumps, Model KL2791 Bus Terminal I/O system enables direct connection of small, 1 A, single-phase motors rated 120 V, 60 Hz, in order to achieve setting range for flow rate from 10-100%. Set value for motor speed is specified by 16-bit value, and motor is switched on and off with mains synchronous pattern. Compact speed controller comes in standard bus terminal housing with width of 12 mm.

ADLINK Technology Inc.
Irvine, CA 92618
May 16, 2008 Designed for signal simulation and control applications that require 16-bit accuracy through voltage output, PCI-6202 AO card provides hardware-timed waveform generation supporting updating rate for 4 AO channels at 1 MS/s per channel. It also features multiple programmable I/O options including digital I/O (TTL), general-purpose timer/counters, motor encoder inputs, and PWM outputs for simple motion control. Unit includes WDM drivers for C/C++, VB, Delphi, and .NET languages.

Omron Scientific Technologies Inc.
Fremont, CA 94555
May 08, 2008 DST1-XD0808SL-1 supports 6 safety inputs and 8 safety outputs and is capable of storing simple logic, which allows local outputs to be directly controlled by local inputs, giving users maximum response time of 18.7 msec. Safety I/O Terminals can operate as DeviceNet Slave, allowing safety input and status information to be monitored via DeviceNet Master. Each safety output can be controlled through network signal, or used as auxiliary output function.

Omron Electronics LLC
Schaumburg, IL 60173
May 06, 2008 Intended for CJ-Series PLCs, Model CJ1W-PH41U 4-point analog input module offers 18-bit resolution, and accepts 28 different types of inputs, simplifying inventory control and maintenance. Present Value can be scaled in any industrial units and is automatically calculated, and rate-of-change calculation can be set from 1-16 sec, allowing even any small rate of change to be detected. Unit features built-in alarm hysteresis, mean value processing, and alarm on-delay setting.

Omega Engineering, Inc. - omega.com
Stamford, CT 06907-0047
Apr 08, 2008 Measuring 3.75 in. square, XL OCS Model HE-XE102, 203, and 204 are all-in-one controllers with sunlight-readable, touchscreen graphics display used for process visualization and machine control. Products support MicroSD(TM) memory modules and feature built-in I/O with removable terminal blocks as well as 2 serial ports with downloadable protocol. Suited for water treatment, packaging, and agriculture industries, all models integrate controller, operator interface, networking, and I/O.

Adaptec, Inc.
Milpitas, CA 95035
Mar 11, 2008 Availalbe in 7 models, RAID Series 5 Unified Serial Controllers allow up to 256 SATA or SAS drives to be connected to single system, providing up to 200 TB of storage capacity. PCIe interface controllers are based on Intel® IOP348 I/O processor to deliver core speed of 1.2 GHz. Supported by Adaptec Storage Manager(TM), units allow for local and remote browser or application-based management from single console, and suit web hosting, video surveillance, medical imaging, and communications.

Pilz Automation Safety L.P.
Canton, MI 48187
Mar 03, 2008 PSSuniversal consists of head module, which undertakes all communication and processing functions, and base modules, connected to head modules, used for installing electronic modules as well as connecting I/O signals. Up to 64 components, each consisting of one base and one electronic module, may be operated per head module. Combining intelligent safety and standard control functions, system is established automatically; included software tool facilitates setup.

Mosaic Industries
Newark, CA 94560
Oct 26, 2007 Featuring 4 dedicated digital inputs and up to 16 more channels that can be configured for either input or output, Digital I/O Wildcard adds programmable digital I/O to controller. Each I/O line is configured for pull-up, pull-down, or tri-state operation. Power I/O Wildcard can be used to interface high-voltage peripherals to instrument or to drive stepper motor, and offers 8 high-current outputs and 4 high-voltage digital inputs. Inputs and outputs are optically isolated to ±2,500 V.

Opto 22
Temecula, CA 92590 3614
Oct 15, 2007 Model SNAP-PAC-S2 is standalone programmable automation controller (PAC) that includes 4 serial ports, each of which is fully configurable for either RS-232 or RS-485 serial communication. Compact unit also comes with two 10/100 Mbps Ethernet interfaces for host and I/O communication. It features 32-bit multitasking processor with floating point unit, 32 MB of RAM, 16 MB of flash memory, 8 MB of battery-backed RAM, and supports multiple communication protocols.

Dynamic Engineering Inc.
Ben Lomond, CA 95005
Oct 08, 2007 Conduction-cooled PMC-BiSerial-III-TRANS has 8 programmable channels, each capable of operating independently or in concert with other I/O. Supported by independent state-machines created within Xilinx FPGA, channels can have same or different protocols. Manchester encoding and decoding, standard serial (UART), control, command, instrumentation, and custom protocols can be implemented. Half-Duplex, Full-Duplex, serial and parallel systems can be configured with software and VHDL.

RTP Corp.
Pompano Beach, FL 33069
Jul 09, 2007 With scan rates of 1,000-2,000 scans/sec, Model 8720 Intelligent Servo Card can be operated in single, dual, or triple modular redundant configurations to run in centralized or distributed mode. It serves as I/O for Node Processor in centralized mode, while in distributed mode it runs user program that is downloaded from NetArrays logic development tool kit. Tag values are available to central node controller. Card includes 2 LVDT inputs, two ±100 mA outputs, and 4 digital inputs.

Supermicro Computer, Inc.
San Jose, CA 95131
Jun 21, 2007 Optimized for Supermicro Universal I/O (UIO) servers, AOC-USAS S-Series is comprised of 4 cards that provide RAID protection and internal/external connection to SAS/SATA storage or backup devices. Solutions are based on 1.2 GHz Intel® IOP348 I/O processor and support RAID 0, 1, and 10. Two higher-end cards also support RAID 5 and 6. With 8 ports at 3 Gbps each, SAS solutions achieve aggregated 2.4 GBps throughput. Controllers are capable of supporting up to 128 HDDs.

Parker Hannifin Corp
Greenfield, TN 38230
Mar 14, 2007 Combining closed-loop pressure control and decision logic, Microfluidic Process Controller (MPC(TM)) electronic pressure control module offers pressure ranges up to 100 psig. Unit provides up to 3 channels of pressure control (proportional and/or digital) that are continuously monitored with programmable logic, allowing entire pressure control applications to be handled with single device. It accepts 3 channels of external feedback, digital I/O, and different output monitor signal.

Extron Electronics, Inc.
Anaheim, CA 92805
Jan 08, 2007 Designed to centralize control of classroom presentation system, MediaLink(TM) MLC 104 IP Plus features built-in IP Link® Ethernet control and is configurable using Global Configurator software. It includes 3 digital I/O ports for controlling switches and relays, and supports optional Infrared Control Modules for controlling sources such as VCRs and DVD players. MLC 104 IP Plus standardizes A/V system user control interface and eliminates need for multiple handheld IR remotes.

Kontron Embedded Computers GmbH
Eching D-85386  Germany
Nov 08, 2006 Powered by 1 GHz Intel® Celeron® M processor, Kontron ThinkIO-P operates over -40 to +70°C range with temperature-resistant components and passive cooling. Extended temperature range is -20 to +70°C with optional field bus. Housed in completely closed aluminum chassis, IPC features soldered main storage (256 MB RAM) and mass storage (internal flash) as well as Compact-Flash socket; all standard PC interfaces; and 2 fast Ethernet interfaces.

Rockwell Automation / Allen-Bradley/Industrial Automation Sy
Mayfield Heights, OH 44124
Oct 13, 2006 Designed for Flex I/O modular system, Knife Disconnect Termination is compatible with 8- and 16-point discrete modules and up to 8-point analog modules. Base provides SPST knife switch action for each side of I/O channels for modules with up to 8 points or for single side of I/O channels for modules with up to 16 points. One-piece base for POINT I/O systems eliminates removable terminal block and is available with screw or spring clamps.

Broadcom Corp.
Irvine, CA 92618
Sep 07, 2006 Based on HyperTransport® technology, Server I/O Controller Chips enable OEMs to choose appropriate I/O and feature set for mainstream multi-socket servers, server towers, and blade server designs. Controllers act as interface from processor to other I/O protocols, such as PCI-Express®, to facilitate data transmission in server system. Equipped with 1 GHz HyperTransport technology and 24 lanes of PCI-Express, Model HT-2100 is capable of tunneling data between 2 HyperTransport ports.

B & R Industrial Automation Corp.
Roswell, GA 30076
Aug 01, 2006 Providing 12 channels on area 12.5 mm wide, X20 System features CPU with CAN and RS232 interfaces, as well as 100 Mbps Fast Ethernet interface that can be used online or for networking. I/O modules attach seamlessly to 25 mm wide slot on CPU, and rail mechanics allow complete system to be mounted on rail like rack. Extended CPU design can be used if separate Fast Ethernet, CAN, or RS232 interfaces become necessary to meet communication requirements.

Rockwell Automation
Milwaukee, WI 53204
Jul 28, 2006 ControlLogix controller 1756-L64 provides speed and processing capabilities that meet plant floor application demands. Memory is used to store and execute recipe data or handle projects and applications with intensive data requirements. Also included, CompactFlash memory socket provides removable and portable nonvolatile storage for user programs and tag data. Controller firmware is also stored on CompactFlash card.

Kontron Embedded Computers GmbH
Eching D-85386  Germany
May 31, 2006 RoHS-compliant CRTtoLCD-7 aFLAT series is available with integrated screensaver function that prevents burn-in and image sticking in TFTs. Along with RGB and DVI inputs, multimedia and TV flat panel controller series includes composite and S-video inputs for PAL/NTSC signals as well as video source support (Component YPbPr). Features include up to WUXGA resolution support, size and position-variable picture-in-picture function, OSD keypad, and optional remote control.