Sealevel Systems Inc.    Liberty, SC 29657
Jun 30, 2003 Model C4-104.ULTRA multi-interface, PC/104 serial I/O card allows user to select desired interface via software. RS-232, RS-422, or RS-485 modes may be selected independently for each of 4 ports. Board uses XR16C864 UART, which provides 128-byte FIFO. In RS-485 mode, C4-104.ULTRA offers automatic control of RS-485 driver enable for trouble-free network master arbitration. RS-485 network termination can be selectively added to circuit via software command.

Men Micro Inc.    Lago Vista, TX 78645-4160
Jun 19, 2003 With 16-bit processing unit, M79 M-Module can be used as flexible solution for intelligent remote I/O in automation and instrumentation applications. Product features intelligent Profibus DP Slave Interface that conforms to Profibus DIN19245 standard. Offered with short-circuit protection on output, with optically isolated RS485 interface, unit supports transmission rates from 9.6 kbps to 12 Mbps. Processing unit has 512 KB of flash memory and 1 MB SRAM.

Mesa Electronics    Richmond, CA 94806-1950
Jun 13, 2003 General-purpose 5120 for PCI bus uses 200 K gate Xilinx FPGA for all logic. FPGA configuration is downloadable from PCI bus side, allowing creation of any kind of specialized I/O function. Product offers pre-made functions and uses three 50-pin connectors with I/O module rack-compatible pin-outs and interleaved grounds. Each connector provides 24 I/O bits; all I/O bits are 5 V tolerant and can sink 24 mA. Card utilizes 4-layer circuit card construction to minimize radiated EMI.

Zendex Corp.    Dublin, CA 94568
Jun 06, 2003 Supported by Linux and MS Windows variants, ZXE-UFE/104P provides four 480 Mbps USB 2.0 port, 2 IEEE 1394 Firewire port, and one 10/100 Fast Ethernet port. Board plugs into PC/104+ CPU card, consumes 2.5 W of power, and seamlessly interfaces with standard PCI bus with plug-and-play functionality. Suited for applications that have several optional peripheral devices, product allows OEMs to add different peripherals at final assembly or as add-ons in field.

IOtech, Inc.    Bedford Heights, OH 44146-1833
Jun 06, 2003 Rack-mountable Model DBK210â„¢ can be configured with up to 32 Grayhill 70M series compatible isolated solid-state digital I/O modules, but occupies same space as 16-channel boards. Modules can sense AC and DC signals and switch AC and DC loads. Four 8-channel banks can be selected as inputs or outputs via switch. LEDs for every channel indicate status. Each channel includes power-up setting that defines state of output channel at power-on.

Opto 22    Temecula, CA 92590 3614
May 27, 2003 OptoGSM accepts G4-footprint, plug-in digital I/O modules and offers 3 built-in analog inputs. Combined with Nokia 30 or 31 GSM Connectivity Terminalâ„¢, it transmits machine or environmental data over any GSM network. Hardware requires no programming, while allowing mix of up to 3 analog and digital input points, and 5 digital output points. Rack is suitable for remote equipment monitoring, diagnostics, control, and data acquisition.

Mosaic Industries    Newark, CA 94560
May 13, 2003 Modular, 2 x 2.5 in. Wildcards are suited for applications requiring multiple I/O points, data acquisition, and real-time control. Plug-in boards include pre-coded device drivers that provide full access to functions using C or Forth programming languages. Up to 8 modules may be connected at once, providing up to 56 24-bit A/D inputs, 160 programmable digital I/O lines, 32 AC control lines, or 24 DC control lines.

Thales Computers Corp.    Raleigh, NC 27610
Apr 24, 2003 PMC-PIO provides 64 channels of 3.3 V parallel I/O, each of which is independently programmable as input or output channel. Bi-directional I/O signals are TTL- and CMOS-compatible and voltage-protected. Unit interfaces to 33 MHz, 32-bit PCI bus through P1 and P2 connectors and enables 16 bits of I/O, configured as input, to be used to generate interrupt on change of state. Product is offered in 3 environmental versions.

Robotrol Corporation    San Martin, CA 95046
Apr 21, 2003 Model RPC616 contains 16 digital-to-analog outputs, and 24 digital I/O with number of programmable modes. Analog outputs have 12-bit resolution and may be set to 7 voltage ranges including 2.5V, 5V, 10V, ±5V, ±10V, -5 to 0V, and -10 to 0V. Digital I/O can be individually programmed to be either inputs or outputs. Data transfer width, interrupt enable, max D/A channel number, mixed voltage and current loop modes, and digital I/O direction are programmable.

Robotrol Corporation    San Martin, CA 95046
Apr 16, 2003 With 500 kHz max A/D throughput rate, RPC632 contains 32 analog-to-digital inputs and 20 programmable digital I/O. Analog inputs have 12-bit resolution and may operate as 32 single-ended inputs or 16 differential inputs, with each input protected to ±32 V. Programmable features include 8- or 16-bit data transfer width and 4 µsec–64 msec conversion intervals. With auto increment and continuous conversion modes, unit offers interrupt, polled status, and external trigger capabilities.

Robotrol Corporation    San Martin, CA 95046
Apr 03, 2003 Model RPC628 contains 16 analog-to-digital inputs, 8 digital-to-analog outputs, and 16 digital I/O with programmable modes. Analog inputs have 12-bit resolution and may operate as 16 single-ended inputs or 8 differential inputs, with each input protected to ±32 V. The 8 analog outputs have 12-bit resolution and 7 voltage ranges. Conversion intervals may be programmed from 4 µsec to 64 msec. Unit includes interrupt, polled status, and external trigger capabilities.

Acromag, Inc.    Wixom, MI 48393 7037
Mar 17, 2003 Series PMC480 features high channel density to conserve PMC slots on VMEbus and CompactPCIâ„¢ boards by processing more I/O functions from single card. Counter/timer modes offer support for internal/external triggering, while quadrature measurement supports X1, X2, X4, and index pulse decoding. Model PMC482 has ten 16-bit counters with TTL interface, PMC483 has four 16-bit TTL counters and four 32-bit RS422 counters, and PMC484 provides six 32-bit RS422 counters.

Sealevel Systems Inc.    Liberty, SC 29657
Jan 24, 2003 ULTRA COMM+8.LPCI low-profile PCI bus serial I/O adapter connects to PLCs, barcode readers, scales, and other data acquisition/control devices. Designed using XR16C850 UART, adapter supports standard PC data rates and offers top speed of 460.8 Kbps. It provides 128-byte FIFO for error-free operation. Connection to board is made through 68-pin connector. Single fan-out cable provides connection to each serial port through individual DB-25 male connectors.

Thales Computers Corp.    Raleigh, NC 27610
Jan 23, 2003 Multi-function Model PMC-DAADIO incorporates onboard Motorola DSP56F807 Digital Signal Processor, enabling it to manage external I/O-intensive applications while minimizing demands on processing capability of PMC host. It provides 8 differential analog input channels, as well as 8 single-ended analog outputs, all operating at 12-bit resolution, in addition to 18 TTL digital I/O lines and counter/timer I/O. PLX9030 32-bit, 33 MHz PCI interface includes memory-mapped I/O.

Tracewell Systems, Inc.    Westerville, OH 43081-8846
Dec 26, 2002 System Management Module is a programmable, stand-alone, intelligent monitoring board. It monitors voltages, temperatures, current, and fan speed and reports present status and alarm conditions via RS-232, Ethernet, and I²C communications links. Base unit monitors up to 8 points for over- and under-voltage, up to 4 fans, up to 3 temperature sensors, and DC OK/AC OK inputs. Outputs include 1 multi-purpose LED indicator, up to 2 open-collector outputs, and 1 form C relay output.

Geotest - Marvin Test Systems, Inc.    Irvine, CA 92614-5846
Dec 12, 2002 Models GX5930 and GC5930 provide 32 I/O channels of programmable outputs and threshold inputs. Incorporated DIOEasy software package includes virtual panel stand-alone application, Windows OS driver, and on-line documentation. Suited for applications that require custom voltages/thresholds, GX5930 units are used with PXI-based modules, while GC5930 units are used with PCI cards. Products provide 0–9 V output signals and capture input signals with 0–9 V thresholds.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Dec 09, 2002 Plug-and-play PCI-IDIO-16 I/O PCI utility card provides 16 opto-isolated digital inputs and 16 solid-state FET outputs. Isolated FET outputs, for switching DC signals, are in 3 groups: one group of 8 with complete isolation, and 2 groups of 4 sharing common ground. Input signals are rectified by diode bridge, while constant-current circuit ensures consistent operation. Card is set up via software to generate interrupt whenever digital input changes state.

Sealevel Systems Inc.    Liberty, SC 29657
Nov 27, 2002 ULTRA COMM+2.LPCI provides dual RS-232/422/485 ports, allowing field-selectable connection to data acquisition/control devices. With low-profile form factor, unit supports PC data rates and operates at top speed of 921.6 Kbps. Board provides 128-byte FIFO, Universal Bus, and SeaCOMâ„¢ suite of Windows 95/98/ME/NT/2000/XP drivers. Onboard auto-enable hardware automatically handles RS-485 driver enable, allowing RS­485 ports to be treated as serial ports.

PanelTEK, Inc.    Fond du Lac, WI 54937
Nov 18, 2002 Mounted on 12 ga panel, Universal I/O board comes completely wired and includes electrical wiring diagrams and parts list as a start for any type of retrofit or automation upgrade. It provides 24 V power supply; Forty-eight 24 V terminal strip mounted inputs; and thirty-six 24–110 V terminal strip mounted output relays. Unit also offers mounting space for additional hardware.

Coreco Imaging    St. Laurent Quebec H4T 1V8, CD   Canada
Oct 10, 2002 Digital Input Module acquires images at resolutions up to 2048 x 1024 pixels from single or dual tap area scan cameras, 8-bits/pixel wide at 60 MHz, or 10-bit/pixel wide at 30 MHz in dual channel mode. LVDS and RS-422 compatible module offers four 256 x 8-bit and one 1024 x 8-bit programmable input lookup tables (LUTs). It is used with Bandit-II RGB (AGP) and Bandit-II MV frame grabbers.