VMETRO, Inc
Houston, TX 77077
Apr 21, 2008 Model FPE650 integrates 4 fully inter-connected user programmable Xilinx® Virtex®-5 FPGAs with 2 FMC I/O sites and VPX high-speed serial backplane connectivity, allowing I/O and processing capabilities in single 6U slot. Available in air- and conduction-cooled rugged versions, it is designed to tackle demanding digital signal processing applications such as Electronic Counter Measures (ECM), Signal Intelligence (SIGINT), and Electro-Optics (EO).

Ballard Technology
Everett, WA 98201
Apr 17, 2008 Offering up to 16 ARINC 429 channels and 4 ARINC 717 channels on PC/104-Plus platform, Model PM429-2 features universal API library, which allows developers to program software on Ethernet or PCI card and import it to PM429-2. Card provides IRIG timer and 16 I/O avionics discrete I/O signals, which can be used as general-purpose I/O or as trigger inputs and sync outputs for protocol functions. Discrete output circuits can sink up to 200 mA and withstand up to 35 Vdc applied to pin.

United Electronic Industries
Canton, MA 02021
Mar 28, 2008 Compatible with Cube and RACKtangle I/O chassis, Guardian Series(TM) DNA-DIO-448 and DNR-DIO-448 read all 48 bits at sustained rates in excess of 1 kS/sec. Input switching levels are software selectable from 0-28 Vdc with 25 mV resolution. Diagnostic input mode measures analog voltage at each input, allowing detection of short and open circuits as well as identifying marginal or failing drive circuitry. Analog input capability also offers installation, diagnostic, and data acquisition tool.

Acromag, Inc.
Wixom, MI 48393 7037
Feb 22, 2008 PMC-VLX modules feature logic-optimized Xilinx® Virtex(TM)-5 FPGA that is reconfigurable for high-performance I/O processing and custom logic routines. Two banks of 32 Mb x 16-bit DDR2 SDRAM receive data from I/O ports for FPGA processing; processed data moves to 2 banks of 256 Kb x 32-bit dual-ported SRAM for high-speed DMA transfer to PCI bus. PMC base card is ready for use in conduction-cooled systems and provides 64 LVDS I/O channels accessible via P4 rear connectors.

Men Micro Inc.
Lago Vista, TX 78645-4160
Jan 17, 2008 Based on Cyclone FPGAs, Universal Submodule concept is available in P699 XMC and P598 conduction-cooled PMC models. Model P699 uses Cyclone III FPGA with 24,624 logic elements and 4 MB Flash memory, while Model P598 features Cyclone II with 33,216 logic elements and 2 MB flash. Nios soft core processor, which features 32 MB of DDR2 SDRAM main memory, is implemented on FPGA. Different IP cores allow user to change functionality of either card without hardware modifications to main module.

Mesa Electronics
Richmond, CA 94806-1950
Jan 03, 2008 Featuring four 50-pin connectors with I/O module rack compatible pin-outs and interleaved grounds, Model 5I22 enables creation of any kind of specialized I/O function. Each connector provides 24 I/O bits for total of 96 programmable I/O bits that are 5 V tolerant and can sink 12 mA. Bus master and DMA capability optimize PCI transfer rates, while 48 MHz crystal oscillator provides reference clock, which can be multiplied by FPGAs DLLs for higher clock speeds.

Advantech Automation Corp.
Cincinnati, OH 45240
Dec 20, 2007 With isolated circuits, Model PCI-1715U protects sensitive measurement circuitry from interference currents or voltages, which is useful when external voltage is different that expected by measurement hardware. Unit offers sampling rate up to 500 kS/s, 12-bit resolution, and isolation protection of 2,500 Vdc. Providing programmable gain for each input channel, card includes 1,024 samples FIFO buffer and supports internal and external pacer sampling modes.

Audon Electronics
Nottingham NG9 4AT  United Kingdom
Nov 26, 2007 Suited for data acquisition and distributed control applications, Modbus-based I/O units integrate analog/digital signals to supervisory SCADA systems. Digital I/O modules include model 16DI with 16 digital inputs, model 16DO with 16 open collector transistor outputs, model 4RO with 4 mains capable power relays, and model 8DIO with 8 digital inputs and 8 transistor outputs. Analog I/O modules include models 8AIIS and 8VIS that accept 8 x 4 20 mA or voltage inputs.

ICSDataCom
Pleasanton, CA 94588
Nov 01, 2007 Including Models ME8200A, ME8200B, ME8200AC, and ME8200BC, Series ME8200 cards provide 16 isolated outputs, 16 isolated inputs, and 16 general purpose TTL lines. Isolated outputs can drive 3-45 V loads and source up to 700 mA per channel, while 16 isolated inputs accept inputs from 3.3-45 V and incorporate transient protection. General purpose TTL lines are 2 bidirectional 8-bit ports, and can be independently used as latched outputs or as gated inputs.

ADLINK Technology Inc.
Irvine, CA 92618
Oct 30, 2007 High Speed Link (HSL) U Series digital, distributed I/O slave modules have flat-bottom housing for tight spaces as well as connector options. With 16 discrete input and 16 discrete output channels, Model HSL-DI16DO16-UJ-N/P offers separate I/O connectors to allow debugging without affecting other I/O channels, while Model HSL-DI16DO16-US-N/P offers shrouded connectors with latch-lock. Model HSL-DI16-UL features 16 discrete input channels and pulse stretcher function.

Mosaic Industries
Newark, CA 94560
Oct 26, 2007 Featuring 4 dedicated digital inputs and up to 16 more channels that can be configured for either input or output, Digital I/O Wildcard adds programmable digital I/O to controller. Each I/O line is configured for pull-up, pull-down, or tri-state operation. Power I/O Wildcard can be used to interface high-voltage peripherals to instrument or to drive stepper motor, and offers 8 high-current outputs and 4 high-voltage digital inputs. Inputs and outputs are optically isolated to ±2,500 V.

TURCK, Inc.
Plymouth, MN 55441
Oct 09, 2007 Providing 4 points of digital I/O, EtherNet/IP(TM) piconet® gateways are available with 8 M8 picofast® or 4 M12 eurofast® connectors. Product has 2 fiber-optic connectors to add modules and increase number of I/O points on single node. Extension module is also available to provide additional 8 inputs and outputs, and up to 255 extension modules may be connected to each gateway. IP-Link fiber-optic communication system allows up to 15 m between modules.

Dynamic Engineering Inc.
Ben Lomond, CA 95005
Oct 08, 2007 Conduction-cooled PMC-BiSerial-III-TRANS has 8 programmable channels, each capable of operating independently or in concert with other I/O. Supported by independent state-machines created within Xilinx FPGA, channels can have same or different protocols. Manchester encoding and decoding, standard serial (UART), control, command, instrumentation, and custom protocols can be implemented. Half-Duplex, Full-Duplex, serial and parallel systems can be configured with software and VHDL.

Bosch Rexroth Corp.
Hoffman Estates, IL 60192
Aug 28, 2007 With SERCOS III Block I/O Digital and Analog Systems, sensors and actuators can be connected to control system through SERCOS III universal bus. Digital unit has 16 fast digital inputs and 16 combined fast inputs or outputs. Analog model has 4 inputs and 2 outputs, each individually configurable. Inputs allow differential registration of analog current and/or voltage signals or detection of temperature signals, while outputs permit connection of current or voltage actuators.

Strategic Test Corporation
Woburn, MA 01801-1915
Jul 30, 2007 Including 4 models, Series UF2e-7000 digital I/O boards for PCI Express feature recording or replay rates up to 125 MHz, 4 Gb memory, and up to 32 channels. Models UF2e-7010 and UF2e-7020 deliver 125 MHz on 16 and 32 channels, respectively, while Models UF2e-7011 and UF2e-7021 offer 125 or 60 MHz on 16 and 32 channels and 32 and 64 channels, respectively. Digital I/O channels can be software selected for input or output in 16-channel increments.

Danaher Motion
Wood Dale, IL 60191-1073
Jul 16, 2007 Model SQIO SynqNet I/O interface boards allow machine builders to integrate custom analog and/or digital I/O hardware with complex, high performance motion into SynqNet network architecture. They provide real-time I/O and remote motion performance diagnostics via SynqNet for in-depth system level visibility, analysis, and control. Time-based capture feature allows users to place high-speed input capture points around network.

DGH Corp.
Manchester, NH 03108
Jul 16, 2007 Equipped with user-programmable watchdog timer, 1700M Series enables computer monitoring and control of devices through solid state relays or TTL signals. Digital I/O status is sent to host in Modbus RTU protocol via RS-232 or RS-485. Digital outputs are open-collector transistor switches that may be controlled by host, while digital inputs may be read by host and used to sense state of remote digital signals. All user selectable options are stored in nonvolatile EEPROM memory.

North Atlantic Industries, Inc.
Bohemia, NY 11716
Jun 19, 2007 Offred in -40 to +85°C and 0-70°C temperature ranges, Model 78C2 cPCI card includes programmable synchro/resolver measurement (4-channels), LVDT measurement (4-channels), A/D (10-channels), D/A (10-channels), function generator (4-channels), discrete I/O (16-channels), TTL I/O (16-channels), transceiver I/O (11-channels), and RTD (6-channels). Ethernet port for data transfer allows board to be used as standalone remote sensor interface.

PFU Systems, Inc.
Santa Clara, CA 95051-3501
Jun 19, 2007 Plug-N-Run(TM) E1 module combines Intel® Core(TM)2 Duo performance at 2.16 and 1.5 GHz with server class I/O support in PICMG standard form factor. Module features include FSB at 667 MHz, dual channel access support up to 4 GB of ECC memory, 2-x8 and 1-x4 lanes of PCI Express, 2 serial ATA channels with RAID support, E1 Gigabit Ethernet, and 8 USB ports. Unit is packaged on standard COM Express Extended 155 x 110 mm form factor.

Microstar Laboratories, Inc.
Bellevue, WA 98004-3039
Jun 14, 2007 Model MSXB 078 digital I/O expansion board features 16 digital inputs and 16 digital outputs on HD62 connector with headers for alternate connectors. It can be slotted into backplane in standard industrial enclosure, and includes onboard processor running real-time operating system. Users can build systems with 128 channels of digital input and 128 channels of digital output on 8 MSXB 078 boards, and up to total of 1,008 digital outputs can be driven by single DAP board.