Data Acquisition Cards & Modules

Test & Measuring Instruments, Computer Hardware & Peripherals

Portable Mainframes offer data acquisition and modal analysis.

March 24, 2015

Packaged with EXLab data acquisition software and instrumentation options that include multi-channel digitizers and arbitrary waveform generators, PMX04 4-slot PXI Hybrid Mainframe is capable of acquiring 24 bit data at 625 kSa/s per channel. PMX04-MOD combines PMX04 mainframe and dynamic signal digitizers and source modules with X-Modal III modal analysis tool. Both integrate 14.0 in. LCD touchscreen, embedded computer with >1 Gbps throughput rates, and 256 GB hard drive for storage. Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Autonomous Scanner facilitates mobile network optimization.

March 10, 2015

Integrating processor and operating without external PC, R&S TSMA provides high-speed collection of data in all available mobile networks and is operated via SwissQual QualiPoc Android smartphone/tablet. While recording data collected by scanner, QualiPoc Android simultaneously carries out voice and data tests, and displays captured values from scanner in real-time. With 350 MHz to 4.4 GHz measurement bandwidth, scanner covers all bands specified for wireless communications technologies. Read More

Test & Measuring Instruments

Capture-To-Disk Platform accelerates appliance development.

March 9, 2015

Pre-integrated and pre-tested, Pandion offers out-of-the-box engine for real-time capture, index, and search of network data via berkeley packet filter (BPF). Platform can be deployed as stand-alone solution, and end-users can add analysis software via support of RESTful API and PCAP. Offered in two configurations (28 TB at 20 Gbps and 56 TB at 40 Gbps), solution provides ability to replay what is happening, exactly as it is happening, for thorough analysis afterwards. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

I/O Device helps accelerate daisy chain expansion.

March 6, 2015

Offering 4-in-1 smart data acquisition solution, ioLogik™ 2500 combines I/O functionality, Ethernet switch, serial/Modbus connectivity, and up to 32 GB of data logging into single remote device. Click&Go™ Plus logic technology is used to control I/O array, eliminating need for extensive rewiring during daisy chain expansion. ioLogik's slave Ethernet port can link up to 8 daisy-chained ioLogik E1200 expansion modules and convert more than 100 channels to one IP address. Read More

Test & Measuring Instruments

Synchronous Multichannel DAQ System offers unique phase coherency.

March 5, 2015

Dense, 64 synchronous multichannel DAQ system is composed of eight 8-channel, 12-bit M9703A AXIe high-speed digitizers in 14-slot chassis that provides 13 instrument module slots (up to 104 channels) and AXIe system slot. Synchronization is realized through AXIe local bus backplane, and system supports customized, real-time signal processing and unique phase coherency. Also included is U5340A FPGA Development Kit for high-speed digitizers.
Read More

Controls & Controllers, Computer Hardware & Peripherals, Test & Measuring Instruments

MicroTCA.4 System suits data acquisition applications.

February 25, 2015

Intended for large control and data acquisition applications, NAT-MCH-PHYS80 addresses requirements for high bandwidth to both AMCs and rear transition slot of MCH as well as for optical and copper uplinks in PCIe-based MTCA.4 systems. Board provides PCIe bandwidth of 128 Gbps to local main CPU; supports cascading of MicroTCA.4 systems to increase number of PCIexpress slots to 24, 36, 48, etc; and provides external PCIexpress access via 128 Gbps optical or copper uplinks. Read More

Controls & Controllers, Test & Measuring Instruments, Computer Hardware & Peripherals

Configurable XMC Modules feature Xilinx Kintex-7 FPGA.

February 25, 2015

XMC-7K series feature reconfigurable Xilinx® Kintex™-7 FPGA and 128M x 64-bit DDR3 SDRAM. Eight-lane, high-speed serial interface on rear P15 connector for PCIe Gen 1/2 (standard), Serial Rapid I/O, 10 GbE, and Xilinx Aurora implementations are supported. While rear I/O provides 4- or 8-lane, high-speed serial interface on P16 XMC port, select I/O or LVDS pairs plus global clock pairs direct to FPGA via rear P4 or P16 port. Read More

Test & Measuring Instruments

Data Acquisition System features touchscreen display.

February 23, 2015

Integrating measurement, display, and recording platforms, GasGard 100 Control System is available with 10.4 in. TFT SVGA LED Panel PC with resistive touchscreen display. LED indicator is provided for power on/off, storage access, and LAN active status. System can manage 1–6 I/O modules on backplane and up to 6 GasGard Controllers can be networked together. With open Ethernet connectivity, controllers can handle wide range of monitoring and historical logging functions. Read More

Test & Measuring Instruments

DAQ Instruments eliminate test channel-to-DAQ usage dependency.

February 18, 2015

Designed for battery, power electronics, and alternative energy testing applications, configurable data acquisition (DAQ) instruments comprise single devices with voltage, temperature, and RTD inputs. Instruments have 24-bit DAQ-per-channel design and full channel-to-channel isolation and allow expansion to higher channel count. Available in 8, 16, 24, 32, 40, or 48 versions, DT8874 series may include any combination of voltage, temperature, and RTD channels to be specified in groups of 8. Read More

Software, Test & Measuring Instruments

DAQ PCIe Card is available with OCT technology.

February 2, 2015

Available with option dedicated to optical coherence tomography technology, 12-bit Model U5303A uses signal resampling which provides on-board enhancement of range analysis and offers stable ADC signal sampling cadence. Data acquisition solution focuses on clock stability while acquiring signal in order to avoid sampling cadence changes. Signal processing is done in real-time directly on data acquisition card, reducing processing load on host computer. Read More

Test & Measuring Instruments, Construction Equipment & Supplies, Sensors, Monitors & Transducers, Machinery & Machining Tools

Diagnostics System provides crane analysis in real-time.

January 27, 2015

Consisting of interface that is integrated into crane installation, and associated software to visualize crane status, Demag StatusControl lets users access all relevant operating data with mobile devices based on Windows. System analyzes and interprets actual condition of cranes and hoist units on basis of comparative data and pre-defined threshold values. With color code based on traffic light system, users can see at-a-glance where work needs to be done. Read More

Test & Measuring Instruments

Ethernet DAQ Device is supported by Windows and Android.

January 27, 2015

Along with 250 kS/sec sampling and 16-bit resolution, E-1608 Ethernet-based multifunction Data Acquisition (DAQ) device offers 8 analog inputs, 8 DIO, one counter input, and 2 analog outputs. OEM board-only version is also available. While Windows® options include DAQami and TracerDAQ® along with comprehensive programming language — C®, C++®, C#®, Visual Basic®, and Visual Basic .NET™ — and driver support, Android™ support lets users develop DAQ applications for tablets/smartphones. Read More

Test & Measuring Instruments, Communication Systems & Equipment, Services

Telematics System targets mobile off-highway equipment.

December 5, 2014

Available for new machines and existing retrofits, Danfoss Telematics Solutions combine machine-integrated technology, satellite and cellular network connectivity, and customizable user interface to give fleet owners visibility of equipment. Plug-and-perform system gathers, transmits, interprets, and stores data that is most valuable to end user. Some capabilities include: data analysis, remote diagnostics, machine location/tracking, geofencing, and machine efficiency monitoring. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Sensors, Monitors & Transducers, Automatic ID

Handheld Barcode Readers ensure imaging data remains secure.

November 28, 2014

To accommodate for those with strict security requirements, HS-41X Handheld DPM (direct part marking) Reader and HS-51X Wireless DPM Reader incorporate Image Lock technology. This feature secures captured images within device, where images are automatically deleted once symbol is decoded. Since images are deleted, they are not made available to connected barcode setup or configuration software UIs or directly accessible by users to view or download from device. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Multipurpose Scanner can act as Modbus master, slave, or snooper.

November 26, 2014

Used for accurate display of and access to information (locally or remotely) in wet or dirty environments, Vantageview PD6730X rugged, NEMA 4X/IP65 Modbus® master, slave, or snooper (sniffer) accepts up to 16 individually programmed process variables (PVs) from multiple devices; 4 math channels allow for calculations on multiple PVs. Along with SafeTouch® through-window buttons, features include pulse input, backlighting, 2 open collector outputs, and analog output. Read More

Test & Measuring Instruments, Software

Low-Noise DAQ System/Digitizer uses noise-cancelling technology.

November 25, 2014

Digidata® 1550A is intended for analog-to-digital conversion of biological signals measured in electrophysiology experiments. Included adaptive noise cancellation technology, HumSilencer™, provides single-click elimination of 50 and 60 Hz line-frequency noise that can impair analysis of biological signals. It identifies local line-frequency noise and suppresses extraneous noise amplitude up to 20 V peak to peak at analog input in <1 sec. Read More

Test & Measuring Instruments, Software

Data Storage Analyzers provide NVMe support.

November 19, 2014

Available for PCIe 3.0 technology, BusXpert Pro supports data rates up to 8 lanes at 8.0 GT/s and offers optional 144 GB of trace buffer, while smaller form factor Micro supports 4 lanes at 8.0 GT/s. Native Non-Volatile Memory Express support permits NVMe commands contained in PCIe packets to be presented and decoded. With software options, user can hide non-NVMe data to focus on traffic of interest. Additionally, BusXpert's 7-level trigger sequencer has been optimized to support NVMe events. Read More

Test & Measuring Instruments, Controls & Controllers, Sensors, Monitors & Transducers

Wireless Temperature Datalogger supports medical monitoring.

November 18, 2014

Suitable for medical refrigerator/freezer, WiFi-enabled Accsense A2-05W features inputs for 2 external RTD temperature probes with temperature range of -100 to +100°C and additional input for thermocouple measuring down to -200°C for cryogenic storage units. Datalogger supports 802.11a/b/g/n specifications as well as WEP, WPA, WPA2, 802.11i, and 802.1x Supplicant. Users can login through any Web browser to view real-time reports and graphs of data or configure system from anywhere via Internet. Read More

Test & Measuring Instruments, Sensors, Monitors & Transducers, Green & Clean

Energy Audit Kit records usage and verifies performance.

November 12, 2014

Used for energy auditing/verification, EC-7VAR Three-Phase Power & Energy Datalogger Kit can record energy (kWh) and power (kW) usage and provides everything needed: datalogger, voltage leads, transducers, Rogowski coils, case, software, and USB lead. Users can view onsite power consumption as result of logging. Electrocorder 3-phase power factor dataloggers monitor 1, 2, or 3 current channels (up to 400 A, 1 kA, 2 kA, or 3 kAac) as well as 1, 2, or 3 voltage channels (30–500 Vac). Read More

Test & Measuring Instruments, Computer Hardware & Peripherals, Electronic Components & Devices

VPX Boards boost functional density.

November 12, 2014

Suitable for data acquisition, software radio, and digital signal processing, 6U VPX Model 57xxx accommodates one Cobalt® Virtex-6 or Onyx® Virtex-7 FPGA XMC module, while Model 58xxx accommodates 2 XMC modules. Boards take advantage of increased I/O to backplane by adding optional LVDS lines from FPGA on each XMC to user pins of VPX backplane connectors. Optional x4 user-configurable gigabit serial links provide additional interconnect options between 2 installed XMC modules to VPX backplane. Read More