Analog I & O Boards

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104+ Module features ruggedized, stackable interface.

August 26, 2013

Equipped with AMD G-Series T16R APU and companion A55E chipset, Model PFM-HDS supports up to 4 GB of DDR3 memory. Embedded computing module includes 3 RS-232, 1 RS-232/422/485 with auto flow, 4 USB 3.0, and 8-bit Digital I/O port. In addition to PCI and ISA expansion for legacy devices, module offers connectivity through 10/100/1000 Base-TX Ethernet with wake on LAN functionality. Multimedia support is provided via 18-bit LVDS, VGA with full HD support, and HD audio in/out jacks. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104-Plus 2-Channel Gigabit Ethernet Card supports POE.

April 5, 2013

Implemented as PC/104-Plus add-in I/O module, PPM-GIGE-2-POE can manage power to remotely located POE devices or board stacks. Solution integrates 2 independent Gigabit Ethernet ports with Power Sourcing Equipment (PSE) circuits. Both POE interfaces can use separate external DC supplies or share one external power source. Operating from -40° to +85°C, 3.6 x 3.8 in. module uses RJ-45 connectors to plug into 10/100/1000Mbps networks using CAT5 unshielded twisted pair copper cables. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

Dual-Card PCI-104 Board Set offers ultra-low (40 msec) latency.

October 1, 2012

Intended for systems with PCI-104 bus, HDAV2000 encodes video to industry standard H.264 format and delivers high video compression ratios along with ultra-low latency performance. Solution has composite video inputs and also supports hardware decoding to enable previously recorded video and audio to be output via HDMI (up to 1080i60), SDI (up to 1080i60), and composite video and NTSC/PAL output. PCI audio interface supports 2 stereo outputs and inputs and one Mic input. Read More

Test & Measuring Instruments

I/O Expansion Modules accommodate various board formats.

May 4, 2011

Expansion modules, intended for systems based on SBCs that expand using PCI/104-Express, PC/104-Plus, or SUMIT-ISM, implement identical analog and digital I/O feature-sets on all 3 formats. Thus one expansion format can be chosen while allowing migration later to alternate format without major rework. Analog modules each include sixteen 16-bit A/D inputs and D/A outputs with programmable range and polarity. Digital modules each have FPGA that supports multiple standard I/O personalities. Read More

Test & Measuring Instruments, Electronic Components & Devices

Sine Reference Oscillator PC104 Cards drive 5 VA loads.

March 15, 2011

Fully operational over -40 to +85°C range, SB-36350CX series sine reference oscillator PC/104 cards provide transformer isolated 5 VA sine output to directly drive high inductive loads without amplifier. Conformal coated product also incorporates short circuit protection and offers software-programmable voltage and frequency. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104-Plus Embedded Board consumes less than 2 W of power.

June 2, 2010

Compact and rugged CAN4000-8S provides 4 independent, fully isolated CANbus channels and 8 non-isolated RS-422/485 serial ports, and serves as universal PC/104-Plus add-in card with 3.3 V host interface (with 5 V tolerance) to host computer. Driven by SJA1000 CAN 2.0B controllers, each CANbus channel includes fully isolated CANbus transceiver powered from external 5 V supply. Serial channels support either RS-422 full duplex or RS-485 half duplex standards, and baud rates to 10 Mbps. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PCI Board supports single-ended/differential analog inputs.

July 24, 2009

Featuring 100 kS/sec, 12-bit 32 channel isolated analog input, PCI-104 module PCM-3813I offers 2,500 Vdc isolation protection and software programmable gain on each analog input channel. Compact unit can be applied in embedded systems, or stacked on other PC/104 modules for function extension. Card supports ActiveDAQ Pro, LabView, and WaveScan, as well as Windows® XP and CE 5.0/6.0 drivers. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104 Boards feature 4, 6, or 8-channels of encoder inputs.

November 21, 2008

Available with 3 differential channels per encoder, including dual axis and index, 104-QUAD-8 Series of PC/104 boards suit applications in embedded motion control and instrumentation. Features included are resettable fused +5 Vdc available per channel, input ranges between ±25 V and ±7 V common mode, clock rate of 4.3 MHz with digital filtering, and 24-bit dual axis quadrature counter LS7266R1. Boards are programmable for counting, speed, and direction. Read More

Test & Measuring Instruments

PC-104 Card acts as LVDT/RVDT-to-digital converter.

June 18, 2008

DSP-based 73LD4 includes 6 independent, isolated, programmable LVDT/RVDT tracking converter measurement channels, each featuring 16-bit resolution, 0.025% FS accuracy, 150 strokes/sec max tracking rate, digital velocity output, incremental encoder outputs, and wrap-around self-test. Operating over 360 Hz to 10 KHz range, each unit also has 2-28 Vrms auto-ranging input, 16 programmable TTL DIO channels, and latch feature for simultaneous channel measurement. Read More

Test & Measuring Instruments

PC/104-Plus Card targets ARINC 429 and 717 applications.

April 17, 2008

Offering up to 16 ARINC 429 channels and 4 ARINC 717 channels on PC/104-Plus platform, Model PM429-2 features universal API library, which allows developers to program software on Ethernet or PCI card and import it to PM429-2. Card provides IRIG timer and 16 I/O avionics discrete I/O signals, which can be used as general-purpose I/O or as trigger inputs and sync outputs for protocol functions. Discrete output circuits can sink up to 200 mA and withstand up to 35 Vdc applied to pin. Read More

Test & Measuring Instruments

Analog Output Module suits embedded computing applications.

March 14, 2008

With 16-channels of 12-bit analog output and 24 digital I/O lines, VCM-DAS-3 PC/104 helps add I/O functionality in single board embedded computing applications. RoHS-compliant unit operates over -40 to +85°C extended temperature range. It features software programmable output ranges, software calibration, ability to reset to zero scale on power-up, read back of DAC and SPAN codes, and latching 2 mm headers. Supporting both unipolar and bipolar operations, unit comes with legacy features. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104-Plus Card includes Ethernet switch.

January 18, 2008

Combining 100BaseT Ethernet MAC with 8-port switch, stackable Model 4I71 enables connection of multiple embedded system cards without power or mechanical problems. Ethernet ports support auto-negotiation, allowing connections with half and full duplex, 10 and 100 BaseT devices plus auto MDX, eliminating need for crossover cables. Switch has sufficient bandwidth to support full duplex wire speed connections on all ports. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104+ Adapter Board supports CardBus and PC cards.

November 5, 2007

Able to support 2 Type I or Type II 32-bit PC cards or one Type III, model 335 allows for expansion of additional functions such as 10/100/1000 Mbps wireless Ethernet adapters, biometric/Bluetooth/memory/ISDN/GPS cards, and rotating hard drives. Other applicable functionality expansion options include CD-ROM/cell phone/docking station/parallel port interfaces, Ethernet LAN/SCSI adapters, and IR WLAN Adapters as well as Modem/Ethernet combination cards, smartcard readers, and VGA. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104-Plus Platform incorporates power-saving feature.

October 5, 2006

Suited for systems that do not need to be instantly responsive at all times, Puma utilizes Suspend-to-RAM (STR) function of General Software's Embedded BIOS® 2000 that allows system to wake up and resume processing in seconds. STR mode lets most Puma circuitry be turned off while OS and application information is stored in RAM. Board consumes under 1 W of power in STR mode, which can be enabled or disabled at will. Read More

Test & Measuring Instruments

Analog I/O Board features autocalibration technology.

March 28, 2005

Without requiring user intervention or software, DMM-32X-AT analog I/O PC/104 module has all intelligence and control necessary for calibration process on board. This enables board to calibrate itself in response to user-programmable delta in ambient temperature. Built-in RS-232/485 serial port and on-board microcontroller are provided for remote communications, enabling device to be used standalone, without CPU. Read More

Test & Measuring Instruments

PC/104 Analog Cards are suited for various applications.

October 26, 2004

Available in 4 models for use in industry, transportation, COTS, and medical applications, cards embrace I/O options requiring analog I/O, digital I/O, and timing and pacing functionality. Conversion rates range from 100-500 K samples/sec with resolutions of 12- and 16-bits, and inputs can be configured for 16/32 single-ended or 8/16 differential lines. Features include programmable gain inputs, FIFO memories, and digital zero and span adjustments. Read More

Test & Measuring Instruments

PC/104 Card provides 8 counters.

July 12, 2004

Using FPGA chip for all counting and I/O, stackable Model 4I36 has 32-bit up/down counters with quadrature count inputs and per channel index inputs. It has selectable TTL and RS-422 levels on quadrature and index inputs. Able to count in normal quadrature mode or up/down mode, product employs digital filtering on encoder inputs. Max count rate with TTL and RS-422 inputs is 4 and 10 million counts/sec, respectively. Read More

Test & Measuring Instruments, Computer Hardware & Peripherals

PC/104-Plus Module incorporates PowerPC.

July 9, 2004

Series PP01 SBC, with temperature range of -40 to +85°C, suits industrial automation and control applications in harsh environments. Freescale Semiconductor's MPC5200 microprocessor, with 384 MHz frequency, provides 760 MIPS and consumes less than 850 mW. Microprocessor includes built-in telematics communications unit as well as floating point unit, memory management unit, DRAM controller, and BestComm/DMA I/O controller that drives industrial I/O interfaces supported by device. Read More

Test & Measuring Instruments

Analog Input Card offers 30 MS/s sampling rate.

April 8, 2004

High-speed, Model PCI-1714 streams continuous data from analog samples to host memory. Simultaneous sampling is provided on all 4 input channels through dedicated A/D converters. Trigger modes include software triggering, internal and external pacer triggering, post trigger acquisition, delay trigger acquisition, and pre-trigger acquisition. Card includes software for auto calibration, so no variable resistor trimming is necessary. Read More

Test & Measuring Instruments

PC-104 Board features optically isolated I/O.

March 9, 2004

Model 104-IDIO-16 is a 32-channel PC-104 utility board featuring 16 optically isolated input and 16 optically isolated solid-state outputs. Non-polarized inputs may be driven by dc sources of 3-31 V or ac sources at frequencies of 40 Hz to 10 KHz. Models are available with or without input change-of-state detection. Input channels have 34-pin IDC-type header. Outputs drive up to 1 A each and are available via 50-pin IDC-type header. Read More