ACCES I/O Products, Inc.
San Diego, CA 92121 1506
Oct 22, 2007 Suited for any PC/embedded system with USB port in rugged industrial environments, Model USB-DA12-8A measures 3.550 x 3.775 in., and features 8 independent 12-bit DACs, 32-bit counter, 128K sample buffer on-board, and DIN rail mounting provision. Other features include 0-2.5, 0-5, 0-10, ±2.5, ±5, and ±10 V output ranges, single-ended and differential outputs for noise immunity, ARB status and control signals via external connections, and two DB25 industry-standard connectors.

Opto 22
Temecula, CA 92590 3614
Oct 12, 2007 Providing 8 channels of -20 to +20 mA analog current input, Model SNAP-AIMA-8 offers factory calibration with 0.8 µA resolution and up to 0.05% (10 µA) accuracy across span. Delivering 0.2 mV resolution when configured for -5 to +5 V and 0.4 mV when configured for -10 to +10 V, Model SNAP-AIV-8 offers 8 channels of analog voltage input. Model SNAP-AICTD-8 delivers 8 channels of analog temperature input, and 0.017°C resolution with ±0.8°C accuracy and 1.0 mA/°C sensitivity.

Banner Engineering Corp.
Minneapolis, MN 55441
Oct 11, 2007 Using FHSS protocol and TDMA technology to ensure secure data communication, DX70 SureCross(TM) Wireless Network provides directly mapped I/O using Gateway and Node, each with 4 discrete inputs and outputs, 2 analog inputs and outputs, and link loss output. Solution offers 2-way RX/TX communications with full acknowledgement for remote I/O applications, and binding security feature minimizes noise/interference caused by other wireless products.

TURCK, Inc.
Plymouth, MN 55441
Oct 09, 2007 Providing 4 points of digital I/O, EtherNet/IP(TM) piconet® gateways are available with 8 M8 picofast® or 4 M12 eurofast® connectors. Product has 2 fiber-optic connectors to add modules and increase number of I/O points on single node. Extension module is also available to provide additional 8 inputs and outputs, and up to 255 extension modules may be connected to each gateway. IP-Link fiber-optic communication system allows up to 15 m between modules.

Dynamic Engineering Inc.
Ben Lomond, CA 95005
Oct 08, 2007 Conduction-cooled PMC-BiSerial-III-TRANS has 8 programmable channels, each capable of operating independently or in concert with other I/O. Supported by independent state-machines created within Xilinx FPGA, channels can have same or different protocols. Manchester encoding and decoding, standard serial (UART), control, command, instrumentation, and custom protocols can be implemented. Half-Duplex, Full-Duplex, serial and parallel systems can be configured with software and VHDL.

VersaLogic Corp.
Eugene, OR 97402
Oct 01, 2007 Physically bolted to host SBC or attached via cable and located up to 2 ft away, up to 4 SPX(TM) (Serial Peripheral eXpansion(TM)) modules of identical or different functionality can be used per system. Bit programmable SPX-2 is 16-bit DIO module with 3.3 V CMOS interface and IRQ generation. Also available, SPX-4 four-channel analog output module features 12-bit resolution, 10 mA per channel output current, and 0-4.095 V range. Both models are RoHS-compliant.

TURCK, Inc.
Plymouth, MN 55441
Sep 13, 2007 Featuring glass-filled nylon housing with integrated DIN-rail mount, FDN20 I/O Stations support up to 32 inputs or 16 dedicated inputs and 16 inputs/outputs on DeviceNet network. Units separate I/O into 3 isolated groups that may be powered by external source or by DeviceNet bus. Outputs are short circuit protected up to 0.5 A on 16 dedicated input and 16 I/O station. Applications include automotive, pharmaceutical, chemical, and material handling industries.

Men Micro Inc.
Lago Vista, TX 78645-4160
Sep 06, 2007 With voltage range of -10 to +10 V and output current of 0-20 mA, M-Module M37N features 4 grounded voltage or current channels with acquisition time of less than 8.5 µs. Channels can be individually adjusted as well as updated automatically and simultaneously. Supporting load resistance of greater than 600 W, module features electrical isolation of 500 V. DC/DC converters generate isolated supply voltages of ±15 V for voltage outputs and +15 V for current outputs.

Beckhoff Automation LLC
Minneapolis, MN 55337
Sep 05, 2007 Designed for EtherNet/IP, Series IL230x-B905 Fieldbus Box modules include four 24 Vdc inputs and 4 outputs. Equipped with 8, M8, or M12 signal connections, fully-sealed and rugged modules are suited for mounting on machines and anywhere moisture and dust resistant IP67 I/O is needed outside of a cabinet. Up to 120 Extension Box modules can be connected to Fieldbus box via integrated IP-Link connection.

Bosch Rexroth Corp.
Hoffman Estates, IL 60192
Aug 28, 2007 With SERCOS III Block I/O Digital and Analog Systems, sensors and actuators can be connected to control system through SERCOS III universal bus. Digital unit has 16 fast digital inputs and 16 combined fast inputs or outputs. Analog model has 4 inputs and 2 outputs, each individually configurable. Inputs allow differential registration of analog current and/or voltage signals or detection of temperature signals, while outputs permit connection of current or voltage actuators.

Strategic Test Corporation
Woburn, MA 01801-1915
Jul 30, 2007 Including 4 models, Series UF2e-7000 digital I/O boards for PCI Express feature recording or replay rates up to 125 MHz, 4 Gb memory, and up to 32 channels. Models UF2e-7010 and UF2e-7020 deliver 125 MHz on 16 and 32 channels, respectively, while Models UF2e-7011 and UF2e-7021 offer 125 or 60 MHz on 16 and 32 channels and 32 and 64 channels, respectively. Digital I/O channels can be software selected for input or output in 16-channel increments.

Red Lion Controls
York, PA 17402 9428
Jul 26, 2007 Model CSOUT high-density analog output module includes 4 isolated, fully scalable outputs that are software configured and offer ranges of 0-5 V, 0-10 V, ±10 V, 0-20 mA, or 4-20 mA. With backplane connection to CSMSTR Modular Controller Series Master, CSOUT modules connect and communicate with PCs, PLCs, and SCADA systems, with each Master supporting up to 16 modules. Internal power management circuits allow modules to be replaced while power is applied.

RJG, Inc.
Traverse City, MI 49686-4713
Jul 20, 2007 Used with eDART(TM) process controller, Lynx Surface Mount Modules feature EMI/ESD sealed enclosures and shielded industrial connectors. Analog Input Module, IA1-S-VI-24 can be used to interface with temperature, dew point, pressure, and other remote sensors, while OR2-S Dual Relay Output Module supplies signals to parts diverters, valve gate controllers, and machine input cards. With isolated input, ID7-S-SEQ Sequence Input Module accepts up to seven 24 V inputs from machine controllers.

VersaLogic Corp.
Eugene, OR 97402
Jul 17, 2007 Available for standard and custom functions, RoHS-compliant Serial Peripheral eXpansion(TM) (SPX(TM)) modules implement SPI Bus that operates on 14-pin interconnect cable. Offerings include 8-channel analog input module, CANbus controller, 4-channel analog output module, TTL I/O port expansion, and 8-channel solid state switch. Up to 4 SPX modules, of identical or different functionality, can be used per system (bolted to host board or located up to 2 ft away).

Danaher Motion
Wood Dale, IL 60191-1073
Jul 16, 2007 Model SQIO SynqNet I/O interface boards allow machine builders to integrate custom analog and/or digital I/O hardware with complex, high performance motion into SynqNet network architecture. They provide real-time I/O and remote motion performance diagnostics via SynqNet for in-depth system level visibility, analysis, and control. Time-based capture feature allows users to place high-speed input capture points around network.

Sensoray
Tigard, OR 97223
Jul 16, 2007 Allowing for simultaneous measurement of up to four 350 strain gauges per module, Model 2612 smart I/O module includes microcontroller which provides I/O services to remote 2601 client via category-5 cable. Two voltage sense lines for bridge input provide 6-wire measurement with 200 nV resolution at 6 Hz rate. Device has automatic standardization circuitry that periodically measures on-boards reference standards to update gain and offset of each channel.

RTP Corp.
Pompano Beach, FL 33069
Jul 09, 2007 With scan rates of 1,000-2,000 scans/sec, Model 8720 Intelligent Servo Card can be operated in single, dual, or triple modular redundant configurations to run in centralized or distributed mode. It serves as I/O for Node Processor in centralized mode, while in distributed mode it runs user program that is downloaded from NetArrays logic development tool kit. Tag values are available to central node controller. Card includes 2 LVDT inputs, two ±100 mA outputs, and 4 digital inputs.

Supermicro Computer, Inc.
San Jose, CA 95131
Jun 21, 2007 Optimized for Supermicro Universal I/O (UIO) servers, AOC-USAS S-Series is comprised of 4 cards that provide RAID protection and internal/external connection to SAS/SATA storage or backup devices. Solutions are based on 1.2 GHz Intel® IOP348 I/O processor and support RAID 0, 1, and 10. Two higher-end cards also support RAID 5 and 6. With 8 ports at 3 Gbps each, SAS solutions achieve aggregated 2.4 GBps throughput. Controllers are capable of supporting up to 128 HDDs.

North Atlantic Industries, Inc.
Bohemia, NY 11716
Jun 19, 2007 Offred in -40 to +85°C and 0-70°C temperature ranges, Model 78C2 cPCI card includes programmable synchro/resolver measurement (4-channels), LVDT measurement (4-channels), A/D (10-channels), D/A (10-channels), function generator (4-channels), discrete I/O (16-channels), TTL I/O (16-channels), transceiver I/O (11-channels), and RTD (6-channels). Ethernet port for data transfer allows board to be used as standalone remote sensor interface.

Microstar Laboratories, Inc.
Bellevue, WA 98004-3039
Jun 14, 2007 Model MSXB 078 digital I/O expansion board features 16 digital inputs and 16 digital outputs on HD62 connector with headers for alternate connectors. It can be slotted into backplane in standard industrial enclosure, and includes onboard processor running real-time operating system. Users can build systems with 128 channels of digital input and 128 channels of digital output on 8 MSXB 078 boards, and up to total of 1,008 digital outputs can be driven by single DAP board.