Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Nov 23, 2005 Comprised of 8- and 10-bit triple ADCs, TVP700x series provides up to 150 and 165 MS/sec for high-definition video and PC graphics. Each offers integrated PLL, output formatter, and support for 3 digitizing channels. Featured on DDP2000 DLP reference design, TVP7000 supports 1080p video inputs, while TVP7001 is available with DDP3020 DLP reference design and increases PC graphics output to 1,600 x 1,200 at 60 Hz UXGA quality. Both support 10-bit mode up to 110 MS/sec.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Nov 18, 2005 Manufactured in 7 x 7 mm QFN-48 package, ADS1258 is fabricated on precision mixed-signal CMOS technology and optimized for multi-channel applications. This 24-bit ADC offers fixed-channel (125 kS/sec data rate) or automatic channel scan (23.7 kS/sec data rate) modes with 20 bits of effective resolution. Along with low latency (42 µs), product features externally accessible output, SPI-compatible serial interface, and 0.0010% max FS integral nonlinearity.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Nov 18, 2005 Offered in lead (Pb)-free, 8-pin MSOP (3.1 x 3.1 x 1.18 mm) and SOIC packages, MCP3551 and MCP3553 delta-sigma ADCs feature resolutions of 21.9 and 20.6 bits, respectively. They offer integral nonlinearity of 2 ppm typ, power consumption of 0.85 mW max @ 5 V, and output noise as low as 2.5 µVrms. Along with auto calibration for every conversion, MCP3551 and MCP3553 have -40 to +125°C temperature range and sample rates of 13.75 and 60 samples/sec.

Analog Devices, Inc.
Norwood, MA 02062-9106
Nov 11, 2005 Comprising 8 models, AD536x and AD537x monolithic DAC series deliver 8 and 40 channels in 8 and 9 mm² packages, respectively. Model AD5362 denseDAC features bipolar voltage outputs, temperature sensor, thermal monitor mode, voltage monitor multiplexer, and power-down mode, and AD5370 offers 2 Vref pins and 2 offset DACs. Both provide user-programmable offset and gain registers, ±10 V output range, 16-bit DNL, 14-bit INL, and 50 MHz SPI-compatible serial interface.

Analog Devices, Inc.
Norwood, MA 02062-9106
Nov 11, 2005 Manufactured in 3-5 mm MSOP package and 3 mm² LFCSP, PulSAR® AD7690 is capable of 400 kSPS data rates and features SNR of 102 dB. It powers down automatically at end of each conversion and dissipates 20 mW at max throughput rate. Along with DNL of ±1 LSB (least significant bit), unit achieves typ INL of ±1 LSB, provides on-chip track-and-hold, and exhibits no pipeline delay or latency. Also available, AD7691 provides 250 kSPS throughput.

Kontron Modular Computers GmbH
  Germany
Nov 11, 2005 Without requiring a PCI or AGP slot, RoHS-compliant CRTtoLCD-5 assembly converts analog RGB or DVI input signals into digital TTL or LVDS signals for TFTs. Integrated Genesis gm5621 chip provides resolutions up to SXGA. Able to process input resolutions up to UXGA and scale image to appropriate size for panel, assembly is available with FLEX32 interface for control of 18-bit TTL flat panels or JILI30 interface for control of single- and dual-port LVDS TFTs up to data width of 2 x 24 bit.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Nov 01, 2005 Fabricated using mixed-signal CMOS technology, 24-bit Models ADS1232 and ADS1234 integrate low-noise programmable gain amplifier, delta-sigma ADC, and internal oscillator, providing front-end solutions for weigh scales, strain gauges, and pressure sensors. Low-noise PGA features rms noise of 17 nV at 10 SPS data rate or 44 nV at 80 SPS, and has selectable gain of 1, 2, 64, or 128, supporting full-scale differential input of ±2.5 V, ±1.25 V, ±39 mV or ±19.5 mV.

Analog Devices, Inc.
Norwood, MA 02062-9106
Oct 19, 2005 Addressing industrial data conversion needs, PulSAR® ADCs include 16-bit AD761x series and 18-bit AD763x series. Analog input ranges are software-selectable across unipolar and bipolar input ranges. Along with error correction circuits, ADCs feature serial and parallel interfaces as well as internal registers that enable flexible switching from input voltage ranges on-the-fly, with zero data latency. Sampling rates range from 250-670 kS/sec to 250-750 kS/sec.

Linear Technology Corp.
Milpitas, CA 95035-7417
Oct 05, 2005 With spurious free dynamic range of 100 dBc combined with 78 dB SNR, 16-bit Model LTC2208 resolves low-level signals in presence of large interferers and blockers. Offered in speed grades up to 130 Msps, unit includes internal transparent dither circuit, which optimizes SFDR response, and digital output randomizer that minimizes unwanted tones caused by digital feedback. Unit is housed in 9 x 9 mm QFN package and consumes 1,250 mW without need for heatsinking.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Sep 13, 2005 Manufactured in TQFP-64 package, ADS1610 is 16-bit, 10 MSps delta-sigma analog-to-digital converter (ADC) that offers 86 dB SNR and 95 dB SFDR. Product operates from a +5 V analog supply and +3 V digital supply. Along with 86 dB SNR and 95 dB SFDR over 5 MHz bandwidth, unit features -94 dB THD and 4.4 MHz passband with under 0.0002 dB of ripple, which provides wideband signal processing. On-chip digital filter simplifies anti-alias requirements.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Sep 02, 2005 Manufactured in 80-pin TQFP PowerPadâ„¢ package, ADS5444 incorporates high-bandwidth input buffer, linear track-and-hold stage, and internal reference. Analog-to-digital converter (ADC) operates from 5 V supply and provides LVDS-compatible digital outputs from 3.3 V supply. Specified over -40 to +85°C temperature range, product offers 68 dB SNR and 75 dB spurious-free dynamic range at max sample rate of 250 MSPS and input frequency of 230 MHz.

Atmel Corp.
San Jose, CA 95131
Sep 01, 2005 Featuring embedded 1:4 LVDS demultiplexer for direct interface with standard FPGAs, 10-bit AT84AS004TP has clock frequency of 2 GSps and SNR of 51 dB @ 2 GSps in first Nyquist conditions. Gain flatness remains flat at ±0.2 dB from dc to 1.5 GHz. Offered in EBGA317 package, product operates over commercial and industrial temperature ranges. It suits high-speed digitization applications such as broadband test and measurement equipment and high-speed DAQ.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Aug 19, 2005 Manufactured in 6 x 6 mm QFN-28 package, ADS8372 successive-approximation (SAR) ADC features 16-bit no missing code performance and 600 kSPS data rate. It ensures integral nonlinearity less than 0.75 LSB and differential nonlinearity less than 0.5 LSB. Along with fully differential, pseudo-bipolar input range, unit offers 16-bit capacitor-based architecture with inherent sample and hold, 4.096 V internal reference, internal reference buffer, and conversion clock.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jul 22, 2005 Model LT1994 draws 14 mA supply current while achieving -94 dBc harmonic distortion at 1 mHz and 3nV/√Hz voltage noise. Unit drives 2.5 and 3 V SAR ADCs without negative supply. Shutdown pin reduces consumption to 300 µA and amplifier is capable of sourcing and sinking to 85 mA. Specified for operation from 2.375–12.6 V, LT1994 is suited for industrial, instrumentation, and medical applications.

KineticSystems Co., LLC
Lockport, IL 60441-2200
Jun 30, 2005 Featuring 16-bit resolution and ±10 V FS output range, CP266 DAC card provides users with single-width, 6U CompactPCI/PXI module. Power-up state of analog outputs can be set to independent user-defined values to provide non-zero voltage settings on application of power. Used to stimulate devices under test for ATE market, product has channel update rate of 2 ms and output accuracy of ±1 mV. Paired output signals are provided to eliminate ground offset effects.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jun 30, 2005 Housed in 32-pin, 5 x 5 mm QFN package with integrated bypass capacitors, 14-bit LTC2255 Analog-to-Digital Converter provides 125 Msps sampling rate and ac performance of 72.1 dB SNR/85 dB SFDR at 70 MHz input. Operating from 3 V supply, it is available in commercial and industrial temperature grades. ADC is suited for battery powered, high performance, test and instrumentation equipment such as satellite receivers, wireless base stations, and portable electronics.

Pentek Inc.
Upper Saddle River, NJ 07458
May 31, 2005 Capable of single- or 2-channel data acquisition, Model 6826 VME A/D converter board utilizes 10-bit Atmel AT84AS008 ADCs and configurable Xilinx Virtex-II Pro FPGA with 11 million gates. It accepts single-ended or differential inputs and digitizes signal bandwidths to 900 MHz. Along with two 64-bit DDR SDRAMs that provide up to 1 Gb of memory, unit features 16 Mb Flash memory, multiple I/O channels, FPDP-II data ports, and serial switched-fabric VXS connections.

Goal Semiconductor Inc.
Montreal, QC H3B 1H4  Canada
May 17, 2005 HVDAC DevKit, model UVK-HVDAC200-4, provides plug-and-play platform for evaluation and prototype development using HVDAC200-4 quad, 9-bit, serially configurable voltage/current DAC with outputs of up to 200 V. Kit comes with Windows®-based demo program and consists of Goal VERSA MIX 8051 MCU, onboard voltage reference, and 2 adjustment potentiometers. Kit also offers over-temperature and temperature-sensor-threshold adjustment, terminal block, and PLCC-44 socket.

Linear Technology Corp.
Milpitas, CA 95035-7417
Mar 31, 2005 Consuming 445 mW, 14-bit, 80 Msps LTC2299 provides -110 dB crosstalk for channel-to-channel isolation. It achieves 73 dB Signal-to-Noise Ratio (SNR) and 85 dB Spurious Free Dynamic Range (SFDR) @ 70 MHz. In higher intermediate frequencies, product achieves 72.6 dB SNR and 80 dB SFDR up to 140 MHz. Family also includes 10-, 12-, or 14-bit resolution models from 10–80 MSps that consume 120–422 mW. All models come in 64-pin, 9 x 9 mm QFN package.

Linear Technology Corp.
Milpitas, CA 95035-7417
Mar 24, 2005 Operating from 3 V supply and drawing 2.7 mW max at full speed, 8-channel, 175 ksps Model LTC1867L provides 16-bit no missing codes over temperature and ±3 LSBMAX INL. Power automatically drops at reduced speeds, typically 0.9 mW at 50 ksps. Unit offers multiplexer and serial interface. Multiplexer allows any combination of single-ended or differential inputs in either unipolar or bipolar mode. Accuracy of converter is independent of shift clock frequency.