Curtiss-Wright Controls Embedded Computing
San Diego, CA 92121-1773
Mar 17, 2009 Available in both air-cooled and conduction-cooled rugged versions, ADC512 FPGA Mezzanine Card is 3 GS/sec, 8-bit ADC card that routes high-speed ADC I/O directly to host board FPGA via FMC connector. Dual-channel card's ADC devices support sampling rate of 3,000 MS/sec per channel. By routing ADC interfaces directly to FMC connector, ADC512 enables FPGA on host board to directly control and receive data. ADC512 supports external clock input to control sampling rate for both ADC channels.

Maxim Integrated Products
Sunnyvale, CA 94086
Feb 18, 2009 Integrating self-sensing regulator, MAX19505/MAX19506/MAX19507 low power, dual-channel, 8-bit, 65/100/130 Msps ADCs minimize number of external components, and consume 43, 57, and 74 mW of analog power per channel respectively. They achieve 49.8 dBFS SNR and 69 dBc SFDR at 70 MHz. Including self-sensing, analog supply regulator, devices feature single-ended or differential clock inputs, 0.4-1.4 V input common-mode range, and integrated CMOS output-termination resistors.

Fujitsu Microelectronics Europe GmbH
Dreieich-Buchschlag D-63303  Germany
Feb 05, 2009 Combining CHArge-mode Interleaved Sampler (CHAIS) technology with 65 nm CMOS process, single-chip DP-DQPSK coherent receiver, designed for 100G optical networks, has 4-channels of 56 GS/sec 8-bit ADCs (I and Q signals, H and V polarization) integrated with logic and memory to perform complete receive PHY function when connected directly to optical front-end. Power consumption is rated at 2 W per channel (typ) at 56 GS/sec, and half-speed mode provides 28 GS/sec at 1 W per channel.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Feb 02, 2009 With digital supply of 1.8-5.25 V and analog supply of 2.7-5.25 V, Series ADS795x includes 8-, 10-, and 12-bit models available with 4, 8, 12, and 16 channels. SAR analog-to-digital converters integrate GPIO, programmable alarm thresholds, onboard sequencer, and SPI compatible interface to minimize board space requirements. Devices target battery and low-voltage applications, such as handheld medical instruments, PLCs, and digital power supplies.

e2v Technologies PLC
Chelmsford   United Kingdom
Jan 09, 2009 Featuring 4 digitally programmable, 10-bit, 1.25 GSPS ADC channels, Model EV10AQ190, when interleaved via SPI and on-chip cross-point switch, operates as 4-channel 10-bit 1.25 GSPS ADC; dual 10-bit 2.5 GSPS ADC; or single channel 5 GSPS ADC. Unit provides 68 dBc SFDR, channel-to-channel isolation of greater than 60 dB, 3 GHz analog input bandwidth, and 1.4 W/channel power consumption. Applications include test and measurement equipment, RF down-conversion, and wireless telecom.

Mercury Computer Systems, Inc.
Chelmsford, MA 01824
Jan 07, 2009 Echotek® Series DCM-V5-XMC incorporates A/D and D/A technology for high-speed and high-resolution data conversion while preserving quality of original signal. It implements Virtex(TM)-5 SX95T or LX155T FPGA, which can be programmed by end-user for specific application requirements. Each FPGA is accompanied by DDR-II-SDRAM and QDR-II-SRAM memory chips, available for buffering input data streams and supporting computationally intense applications.

SWP, Inc.
Ontario   Canada
Jan 07, 2009 Available in 5 x 5 x 1.0 mm body, 32-pad, lead pitch 0.50 mm Micro Lead Frame package, CMOS ICs of Universal Frequency-to-Digital Converters UFDC-1 and UFDC-1M-16 can work with any sensors from frequency-time signal domain group and convert frequency, period, duty-cycle, duty-off factor, and rotation speed to digital. Model UFDC-1 and UFDC-1M-16 have programmable accuracy from 1 to 0.001% upto frequency range of 7.5 MHz, and scalable resolution from to 2.5 x 10-7 Hz to 45 Hz.

Linear Technology Corp.
Milpitas, CA 95035-7417
Jan 05, 2009 Operating from 1.8 V analog supply, LTC2261 14-bit 125 Msps ADC offers SNR performance of 73.4 dB and SFDR of 85 dB at baseband. Low jitter of 0.17 psRMS allows undersampling of IF frequencies with noise performance, while digital outputs can be set to full rate CMOS, double data rate CMOS, or double data rate LVDS. Offered in 6 x 6 mm QFN package, unit randomizes digital output before it is transmitted, and can reduce residual tones caused by digital feedback by 10-15dB.

National Semiconductor Corp.
Santa Clara, CA 95051-0695
Nov 14, 2008 At 248 MHz, ADC10D1000 provides spurious-free dynamic range(SFDR) performance of 66 dBc and 9.1 effective number of bits. This 2 GSPS single/1 GSPS dual ADC runs off single supply voltage and consumes 2.8 W. At 2.5 GHz, LMH6554 wideband fully differential amplifier drives 10-bit ADC10D1000 and provides 0.1 dB gain flatness up to 800 MHz, SFDR of 72 dBc at 250 MHz, and input voltage noise performance of 0.9 nV/sqrt Hz.

Texas Instruments, Inc., Semiconductors
Dallas, TX 75243
Oct 24, 2008 Housed in 7 x 7 mm, 48-pin QFN package, 12-bit Model ADS6129 and 14-bit Model ADS6149 are suited for communications, defense, and test and measurement equipment. Model ADS6149 features 70 dB signal-to-noise ratio and 80 dB spurious-free dynamic range for input frequencies ranging from DC to 250 MHz. At max sample rate of 250 MSPS, ADS6149 consumes 687 mW, and at sample rate of 150 MSPS, with dynamic power scaling, device consumes as little 490 mW.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Oct 13, 2008 Operating at speeds of 625 kSPS, 24-bit Model ADS1672 integrates chopper-stabilized modulator, which optimizes ac performance and dc accuracy. Unit features 107dB dynamic range at 625 kSPS, 115 dB THD, and 3 ppm integral nonlinearity. Dual-path digital filter allows user to select between 305 kHz bandwidth path or low-latency path with settling time of 5.5 µs. Converter includes selectable serial interface, either LVDS or CMOS, for connectivity to MCUs, DSPs, or FPGAs.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Oct 09, 2008 Featuring 39 mW/channel at 32.5 MSPS, AFE5851 integrates 16 variable gain amplifiers (VGAs) and eight 12-bit, 65 MSPS ADCs. Each converters is shared between 2 VGAs and has scalable power consumption, and each VGA differential output is sampled at alternate clock cycles. Featuring 50 mW/channel at 30 MSPS and 58 mW/channel at 50 MSPS, AFE5801 integrates 8 VGAs and eight 12-bit, 65 MSPS ADCs with LVDS data outputs. Both products come in 9 x 9 mm, 64-QFN package.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Oct 02, 2008 Suited for wide-bandwidth, high-sensitivity applications, 16-bit Model ADS5485 can achieve signal-to-noise ratio of 75 dBFS and spurious-free dynamic range of 87 dBc for 70 MHz input frequency. Single-channel unit eases analog front end design by incorporating fully differential input buffer, which provides constant input impedance over input frequency and eliminates kickback from ADC's track-and-hold structure to ensure consistent linearity of signal.

Linear Technology Corp.
Milpitas, CA 95035-7417
Sep 15, 2008 Supplied in 4 x 3 mm DFN and MSOP packages, 1-channel LTC2301 and two-channel LTC2305 are 12-bit ADCs that communicate via I²C-compatible, 2-wire interface and dissipate 1.5 mW at 1 ksps output rate. LTC2301 measures single differential input, while LTC2305 digitizes 2 single-ended inputs. Both operate from 5 V supply and include 2 address select pins that can be tied low, high, or left floating. Internal reference and low-power shutdown mode reduce power dissipation to 35 µW.

Analog Devices, Inc.
Norwood, MA 02062-9106
Aug 19, 2008 Along with 92 dB SNR, AD7626 PulSAR® ADC achieves 16-bit data capture performance with 15-bit ENOB (effective number of bits) and 10 MSPS throughput. It can also be multiplexed for applications that do not require full 10 MSPS data rates, consumes 130 mW of power, and uses self-clocked LVDS bus. Model AD7625 operates at 6 MSPS. Both 16-bit SAR (successive-approximation register) ADCs come in 5 x 5 mm, 32-lead QFN package and utilize architecture that provides zero data latency.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 14, 2008 Featuring 25 kHz bandwidth, 2 µV/C offset drift, and up to 97 dB SNR, ADS1174 (4-channel) and ADS1178 (8-channel) 16-bit A/D converters offer 2 operating modes that allow for 52 kSPS speed and 7 mW/channel power dissipation. Delta-sigma ADCs have chopper-stabilized modulator and onboard decimation filter that suppresses modulator and out-of-band noise, providing usable signal bandwidth up to 90% of Nyquist rate with stopband attenuation of 100 dB.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Jul 09, 2008 Featuring 102 mW/channel at 1.25 nV/rtHz at 40 MSPS, 8-channel AFE5804 contains low-noise amplifier, voltage controlled attenuator, programmable gain amplifier, low-pass filter, and 12-bit 10-50 MSPS analog-to-digital converter with LVDS data outputs. LNA is set for 20 dB gain and includes 280 mVpp input range, while gain of VCA can be varied over 46 dB range with 0-1.2 V control voltage common to all channels. PGA can be programmed for gains of 20, 25, 27, and 30 dB.

GE Fanuc
Charlottesville, VA 22911
Jun 27, 2008 Designed for software-defined radio, diagnostic imaging, and radar/signals intelligence, Model ICS-1650 high-speed ADC features four 12-bit analog input channels with simultaneous sampling at up to 250 MHz. It has 4-lane PCI Express interface that provides up to 1.25 GB/sec net payload data rate, enabling continuous data acquisition at sample rates exceeding 200 MHz on all 4 channels. Unit comes with user-programmable Xilinx® Virtex(TM)-5 FPGA and 16 MB of QDR II SRAM memory.

Microchip Technology, Inc.
Chandler, AZ 85224 6199
Jun 18, 2008 Including Models PIC18F13K50 and PIC18F14K50, Series PIC18F1XK50 8-bit PIC® microcontrollers include host of serial communication interfaces, such as USB 2.0, I2C(TM), SPI, and USART, enabling them to transfer data between USB and other embedded serial networks. They also provide 10-bit, 9-channel ADC and dual comparators with S/R Latch. Model PIC18F13K50 has 8 Kb Flash and 512 Bytes of RAM memory, while PIC18F14K50 has 16 Kb Flash and 768 Bytes of RAM.

Linear Technology Corp.
Milpitas, CA 95035-7417
May 19, 2008 Operating from single 2.7-5.5 V supply, Models LTC2451 and LTC2452 measure single-ended/differential sensors via either I²C or SPI serial interfaces. They achieve 16-bit dc performance of 2 LSB integral nonlinearity error, 1.4 µVrms transition noise, and 0.01% gain error. Suited for portable sensor applications, units include internal oscillator and allow up to 60 conversions/sec. ADCs incorporate input sampling network that reduces dynamic input current to less than 50 nA.