Calex Mfg. Co., Inc.    Concord, CA 94520
Mar 24, 2010 Housed in plastic case measuring 4.3 x 0.89 x 2.9 in., 8940 Series thermocouple to analog 0-10 V signal conditioners are designed for use with 100, 500, and 1,000 W platinum RTDs with temperature range of -50 to 450°C and with 2 or 3 wire RTD configurations. Input is isolated from output and both are isolated from supply voltage. Employing linearization and 3 wire compensation, all models feature built-in DIN rail mounting foot and connections via screw terminals.

Fairchild Semiconductor    San Jose, CA 95134
Mar 22, 2010 Low ICCT gate TinyLogic devices offer up to 99% reduction in quiescent power consumption when input high voltage is less than supply voltage. Packaged in an ultra-compact 6-pin MicroPak(TM) packaging and measuring only 1 x 1.45 mm, units take up minimal board space, making them ideal for space-constrained designs.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Mar 18, 2010 Respectively featuring 48 and 24 channel high-current TTL DIO lines, PCIe-DIO-48S and PCIe-DIO-24S offer change of state detection and interrupt capabilities. Products are compatible with industry standard 8255 PPI and offer two 50-pin male headers with 24 digital lines each. User interrupt pin is featured on each DIO connector, and all 48 DIO lines are buffered with 32 mA source/64 mA sink current capabilities. All 4- and 8-bit ports are independently selectable for inputs or outputs.

3COM Corp.    Marlborough, MA 01752
Mar 18, 2010 Offering port density to support, simplify, and secure migration to virtualized core and data center environments, H3C® S9500E uses virtual switching fabric to optimize performance while reducing complexity and enhancing security. Intelligent Resilient Framework (IRF(TM)) technology enables multiple H3C S9500E enterprise core switch to be linked as single virtual switch. Platform is available in 3 chassis models offering 12, 8, and 5 I/O modules.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Mar 17, 2010 Comprised of 10 USB-based data acquisition and control I/O modules, USB-AO Series offers unipolar and bipolar output ranges with 12- and 16-bit resolution. High-speed USB 2.0, multifunction board USB-AO16-16A features 16 channels of 16-bit resolution analog outputs along with two 16-bit analog inputs and 16 DIO lines. It can be used in any PC or embedded system with USB port. All analog output channels can be updated individually or simultaneously.

Maxim Integrated Products    Sunnyvale, CA 94086
Mar 17, 2010 Supplied in 5 x 5 mm TQFN package, passive MAX2044 supports high- and low-side LO injection architectures for 3.1-3.9 GHz LTE and WiMAX base stations. It can also be configured for 2.3-2.9 GHz LTE, WiMAX, and MMDS high-side injection architectures. As downconverter, IC provides 32.5 dBm of IIP3, 21 dBm of IP1dB, 7.7 dB conversion loss, and 8.5dB noise figure. When configured as upconverter, it delivers 33.5 dBm of IIP3, 60.2 dBc of LO ±2IF suppression, and conversion loss of 7.7 dB.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Mar 17, 2010 Offering software-selectable timeout from 4 µsec, Model P104-WDG-CSMA contains watchdog timer that monitors operation of application program and operating system to initiate system reset in case of lockup. Card can also monitor and control variety of system hardware parameters. Featuring 2 general purpose 8-bit A/D inputs and 2 current-limited, isolated outputs, P104-WDG-CSMA provides temperature measurement, fan status and speed control, and PCI/104 power monitor.

Analog Devices, Inc.    Norwood, MA 02062-9106
Mar 16, 2010 Offering 1 ppm resolution and accuracy, 20-bit Model AD5791, when used in MRI systems, optimizes image quality and enables precise control of magnetic gradient. Device features low noise of sub 1 ppm, refresh rate of 1 µs, and output drift of sub 1 ppm, maximizing operational up-time by eliminating need to take MRI system offline for calibration cycles. Able to be configured for unipolar or bipolar output ranges, DAC uses 3-wire serial interface operating at 50 MHz.

Maxim Integrated Products    Sunnyvale, CA 94086
Mar 16, 2010 Available in 3 x 5 mm, 10-pin µMAX® package, dual 2-wire Model MAX9621 enables microprocessor to monitor status of Hall-effect sensors either through analog output by mirroring sensor current for linear information or through filtered digital output. Device protects sensors from supply transients up to 60 V and short-to-ground conditions. Operating from 5.5-18 V supply, MAX9621 features 1 µA shutdown mode and is specified over -40 to +125°C automotive temperature range.

Performance Technologies Inc.    Rochester, NY 14620
Mar 15, 2010 Accessed via Web-based UI that facilitates set-up, configuration, monitoring, and maintenance, MPR2000 lets integrators expand existing air traffic control recording systems and leverage new technologies to build IP-based sensor and radar recording solutions. Record feature stores data in raw or payload format with timestamping, and multiple playback function allows simultaneous sessions to be conducted and distributed to discrete users.

Beckhoff Automation LLC    Minneapolis, MN 55337
Mar 15, 2010 Using Beckhoff Bus Couplers or DIN rail-mounted controllers, High Density Bus Terminals are compatible with almost every major fieldbus. Units are available as 16-channel terminals for digital inputs or outputs, as 8-channel terminals for digital inputs or outputs with 2-wire connections, or as combination with 8 digital inputs and 8 digital outputs. Using direct plug-in technique, single wire connectors are connected without tools. Color coding for signal types is integrated into LED display.

Balluff, Inc.    Florence, KY 41042-0937
Mar 12, 2010 EtherNet/IP(TM) machine mount I/O block products, comprised of 12 I/O block versions and one IP67 unmanaged switch, are ODVA-certified and operate up to 100 Mbps. IP addressing can be accomplished using BOOTP/DHCP, through IP67 IP Address Plug (IPAP), via pushbutton display (100 series only), or web pages. Backlit addressable display shows all octets of IP address, subnet mask, and gateway address while pushbuttons facilitate adjustment of any octet.

ITT Interconnect Solutions    Santa Ana, CA 92705
Mar 12, 2010 Providing complete EMI shielding, PCMCIA RoHS compliant I/O kits include snap-fit model with pair of mechanically-assembled SS card covers that provide PC card with torsional stiffness and optimal drop test performance. With ultrasonic kit, plastic cover set is welded around card ultrasonically to create solid protective shell. Both secure, tamper-proof kits feature standard card end closure moldings and 68-pin connector that withstands over 10,000 mating cycles.

Linear Technology Corp.    Milpitas, CA 95035
Mar 12, 2010 Available with 16- or 12-bit resolution and internal 1.25 or 2.048 V reference, Series LTC2654 achieves 16-bit performance of ±4 LSB INL max over temperature with offset error of ±2 mV max and gain error of 0.1% max. Integrated reference achieves 2 ppm/°C typical and 10 ppm/°C maximum temperature coefficient. Operating from single 2.7-5.5 V supply, digital-to-analog converters communicate via 4-wire SPI/Microwire compatible interface up to 50 MHz.

ViXS Systems Inc.    Toronto M2J 1R3  Canada
Mar 12, 2010 Employing Smart XCode(TM) technology and 1,250 DMIPS dedicated application processor, XCode®4111 enables seamless transfer of content across Consumer Electronic devices. Ethernet/WiFi connected devices built around this HD transcoder/encoder can serve as media center controller for conversion and transfer of A/V content between connected devices. Software stacks for DLNA Digital Media Server, Digital Media Client, DLNA Bridging, and DTCP/IP Security can be provided at source code level.

Balluff, Inc.    Florence, KY 41042-0937
Mar 11, 2010 With Profibus/Micropulse Interface Block, up to 4 Micropulse linear position transducers can be connected on single Profibus node, using digital START/STOP interface. Block also has 4 extra inputs for either discrete or analog sensors. Packaged in rugged metal housing, interface block provides detailed diagnostic feedback over Profibus network and is suited for injection molding, metal stamping, printing, and paper handling equipment.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 11, 2010 Enclosed in robust aluminum housing, Model RAI-GFCI-109-B has UL approved 15 amp rated outlet and circuit breakers. Housing has hinged dust cover that provides protection in industrial environments. With the dust cover closed and latched, through connector interface has IP65 rating that provides watertight seal.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Mar 09, 2010 Available in 10 models, USB-AO Series I/O modules include up to 16 analog outputs with 12- or 16-bit resolution and up to two 16-bit analog inputs and 16 digital I/O lines. Analog output channels can be updated individually or simultaneously, with calibration performed via software utility. Micro-fit USB header connector, provided in parallel with type B connector, supports stacking/embedded applications. Units are packaged in industrial enclosure except for board-only OEM version.

LeCroy Corp.    Chestnut Ridge, NY 10977
Mar 05, 2010 Designed for Summit(TM) PCI Express Protocol Analyzer product line, PCI Express 2.0 External Cable Interposer provides dedicated probe that facilitates analysis of data traffic between host and device that are connected using external PCI Express cable. Interposer allows protocol analyzer connection by tapping into external cable connection. Unit supports PCI Express data channels with lane widths of x4 and x8 at all standard PCIe data rates up to 5 GT/s.

Diamond Systems Corporation    Mountain View, CA 94043
Mar 05, 2010 Models CME-Atom and CME-965 COM Express 1.0 modules are rated for operation either over -20 to +71°C or -20 to +85°C temperature ranges. Measuring 3.7 x 4.9 in., they integrate low-power Intel processor, DDR2 SDRAM, and set of PC-compatible system controllers/interfaces. Modules feature 8 USB 2.0 ports; GbE LAN interface; and high-resolution VGA CRT and LVDS LCD video, audio in/out, and mass storage interfaces. They also provide PCI Express, 32-bit PCI, and LPC expansion bus signals.