National Instruments Corp.    Austin, TX 78759-3504
Aug 11, 2010 Comprised of 8 devices suited for engineers and scientists in portable test, measurement, and data-logging applications, USB X Series integrates analog measurement and control channels, DIO, and counter/timers within each device. Extruded aluminum enclosure houses up to 32 analog inputs, 4 analog outputs, 48 DIO, and 4 counters. Ranging from 500 kSps multiplexed AI to 2 MSps/channel simultaneous sampling AI, series leverages NI-STC3 timing/triggering technology and NI Signal Streaming.

National Instruments Corp.    Austin, TX 78759-3504
Aug 11, 2010 NI 9157 and NI 9159 MXI-Express RIO, 14-slot expansion chassis feature Virtex-5 FPGAs and MXI-Express link that delivers high bandwidth for streaming data to and from multiple chassis from single controller. Utilizing CAT 5 Ethernet cabling, NI 9148, 8-slot Ethernet expansion chassis communicate with NI CompactRIO, PXI controllers, NI industrial controller, or any networked Windows PC and include LabVIEW FPGA software. LabVIEW can be used to program processor, FPGA, and I/O of both devices.

Dewetron America    Wakefield, RI 02879
Aug 10, 2010 Running at up to 200 kS/sec, DEWE-50-USB2-8 features digitizer with eight 24-bit ADCs, with one per analog channel, for simultaneous sampling of all channels. Unit includes 2 synchronous counter inputs, 2 high-speed CAN BUS interfaces, DC power input connector, and locking USB connector on rear panel. Running from 9-36 Vdc power, device incorporates AC/DC converter to power it from 120 or 240 Vac power, and also supports various plug-in signal conditioning modules.

Radiometrix Ltd.    Watford Hertfordsh WD19 5EZ  United Kingdom
Aug 10, 2010 Suited for industrial/commercial telecommand applications, Model CTA88 provides 8-channel digital I/O implementations of remote control functions, using multichannel UHF/VHF band or single frequency FM band wireless radio modules. Unit consists of 2 CTA88-000-DIL chips, CTA88 encoder, CTA88 decoder, ¼ wavelength monopole or helical antennas, 4 jumpers for mode configuration, DIP switches for address and frequency channel configuration, 8 opto-isolated digital inputs, and 8 relay outputs.

National Instruments Corp.    Austin, TX 78759-3504
Aug 10, 2010 NI cDAQ-9188 holds 8 I/O modules for measuring up to 256 channels of electrical, physical, mechanical, or acoustic signals in 25 x 9 x 9 cm chassis. System uses NI Signal Streaming to deliver high-bandwidth data over Ethernet to host computer and maintain bidirectional analog and digital waveforms continuously over TCP/IP connection. Chassis manages up to 7 separate I/O tasks at different sample rates and withstands -20 to +55°C temperatures, up to 30 G shock, and 3 G vibration.

Advantech Automation Corp.    Cincinnati, OH 45240
Aug 09, 2010 Featuring multiple trigger modes, 12-bit Model PCIe-1744 achieves sampling rate of 30 MHz with independent analog-to-digital converters for each of 4 analog input channels. Large sample FIFO buffers per channel help ensure all readings are securely captured. Typical applications include automatic test equipment, quality control, and factory production.

Linear Technology Corp.    Milpitas, CA 95035
Aug 06, 2010 Offered in 20-lead, 4 x 4 mm QFN and 16-lead narrow SSOP packages, LTC2655 features integrated reference that achieves 2 ppm/°C typ and 10 ppm/°C max temperature coefficient. This 16- and 12-bit DAC series, operating from one 2.7-5.5 V supply, communicates via 2-wire I²C-compatible interface at up to 400 kHz. Combination of +2 mV max offset error and 0.1% max gain error ensures device retains accuracy near supply rails and provides users with wider effective output range.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 06, 2010 Suited for multi-pallet machining systems, OSI with OMM-2 optical interface supports up to 3 machine-tool probe systems for automated part set-up, measurement, and tool setting. Unit combines with 1 or more OTS tool setters and 1 or more OMP40, OMP400, or OMP60 inspection probes, and only one OSI receiver is needed to process signals from probes that operate in modulated mode. Combined in tandem, OMM-2 interface units suit machines with long spindle movements and with partitioned work zones.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 06, 2010 Housed in 9 x 9 mm package, 16-bit Model AD9650 consumes 328 mW per channel while achieving SNR figure of 82 dBFS and SFDR performance of 90 dBc with 30 MHz input. Unit operates from single 1.8 V supply and separate digital output driver supply, accommodating 1.8 V CMOS or LVDS outputs. Converter is suited for data acquisition systems in medical imaging, industrial, spectrum analysis, multimode radio, and radar applications.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 05, 2010 Model AD9644 dual-output ADC consumes 423 mW at 80 MS/sec and features multi-stage, differential-pipelined architecture with output error correction logic. At 70 MHz and 80 MS/sec, it achieves SNR of 73.7 dBFS and SFDR of 92 dBc. ADC is available in 48-lead LFCSP package, while single output AD9641 is offered in 32-lead LFCSP, both incorporating JESD204A data converter serial interface standard with coded data rate that supports up to 1.6 Gbps per link.

Marposs Corp.    Auburn Hills, MI 48326-2954
Aug 04, 2010 Based on ARM9 RISC technology, Gage Pod(TM) connects to Marposs E9066 industrial computer or commercial PC running Marposs Quick SPC software. System uses variety of modules that snap together without interconnecting cables, and can be combined and tailored to any application. All modules are synchronized for demanding dynamic measurements including linear and rotary encoder signals. Gage Pod connects to computer via USB or Ethernet cable or wirelessly through Bluetooth® or Wi-Fi connection.

MosChip Semiconductor Technology Ltd.,    Banjara Hills   India
Aug 04, 2010 Consisting of 4 devices, MCS99XX Series enables variety of PCI Express® to multiple I/O connectivity options. Serial ports are compatible with RS232, RS422, and RS485 standards and support throughput from 50 bps to 16 Mbps, while parallel port is compatible with IEEE 1284 and supports Nibble, Byte, SPP, ECP, and EPP modes. All 8 GPIO pins are programmable and can be used as input or output. I2C interface is provided to configure MCS9900 device options through external EEPROM.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 03, 2010 Available in linear and rotary versions, TONiC optical encoder provides fine resolution to 5 nm and operates in temperatures up to 70°C. High SNR combined with dynamic signal processing ensure low sub-divisional-error of less than ±30 nm. Auto-calibration, integral diagnostic LEDs, and IN-TRAC optical reference mark facilitate installation. Featuring 35 x 13.5 x 10 mm read-head, encoder is suited for installation on micro-manufacturing systems in semiconductor, lab, and medical fields.

Pulse Engineering, Inc.    San Diego, CA 92128
Aug 03, 2010 SmartER(TM) B8887NL central office (CO) splitter module enables dense mounting of multi-channel splitter cards, resulting in more modules per digital subscriber line access multiplexer (DSLAM) or roadside cabinet. Featuring 8 mm profile that increases airflow area between multi-channel splitter cards, module separates plain old telephone service (POTS) and DSL data signals. It complies with TR-127 for VDSL2 applications and meets ETSI 600 ohm and China MII standards.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 02, 2010 Providing 4,096 counts/rev of absolute position feedback, AM4096 On-Axis(TM) Encoder delivers 0.1° accuracy at speeds to 60,000 rpm, making it suited for commutation, high-speed motor control, position/velocity control, and replacement of potentiometer and optical encoders. Non-contact 12-bit IC has no moving parts and offers programmable zero position. Operating from 3.3 or 5 V, device withstands temperatures from -40 to 125°C and has sleep mode for battery operation.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 02, 2010 Sealed to IP68, LM10 brings 100 m travel capability to machinery applications with high-speed, high-precision positioning requirements. Solid-state, non-contact design features read-head that rides at 0.1-1.5 mm standoff over self-adhesive magnetic strip scale, providing count for positioning with 5 µm resolution at 20 m/sec and 1 µm at 4 m/sec. Resistant to shock, vibration, and pressure, products include digital and analog output models with resolutions of 1, 5, 10, 50, and 100 µm.

Renishaw, Inc.    Hoffman Estates, IL 60192
Aug 02, 2010 Constructed of stainless steel, FASTRACK features track-mounted scale that can run across gaps up to 25 mm wide. This suits large, sectional machines used in flat-panel display and PV manufacturing applications as well as large CMMs that require removal of scale for transit. System consists of 2 miniature guide rails that secure low-profile scales with 8 x 0.2 mm cross-section while allowing them to freely expand at their own thermal expansion rate with almost zero hysteresis.

Newport Electronics, Inc.    Santa Ana, CA 92704
Aug 02, 2010 Comprised of signal conditioners and PID controllers, DIN rail-mount iDR series are available with Ethernet option for connecting directly to LAN and serving Web pages over Internet. Universal signal input covers 10 thermocouples; 100 and 1,000 ohm RTDs with 2-, 3-, or 4-wire connections; Process (DC) Voltage, current, and Strain Gauge inputs. Optional outputs include Form C SPDT relays, SSRs, DC pulse, programmable isolated or non-isolated analog voltage, and current.

Advanced Micro Controls, Inc.    Terryville, CT 06786
Aug 02, 2010 Available with stainless steel housing and IP67 or IP69K rating, DuraCoders® are protected against high-pressure and high-temperature washdowns and liquid ingress from immersion in water or contaminants. Units come with 2.5 in. housing and double row sealed bearing. Offered in solid shaft and hub shaft models, encoders provide shaft loadings up to 100 lb radial and 50 lb axial. SSI, Digital, Analog, Incremental, DeviceNet, and Ethernet/IP versions are available.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 02, 2010 Housed in 72-lead LFCSP, dual, 16-bit TxDAC+® Model AD9125 includes features optimized for direct conversion transmit applications, including complex digital modulation, and gain and offset compensation. Unit offers programmable full-scale output current from 8.7-31.7 mA and 4-wire serial port interface that allows programming/readback of many internal parameters. Flexible CMOS digital interface allows standard 32- wire bus to be reduced to 16-wire bus.