Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 11, 2011 Covering frequencies from 300 kHz to 1.05 THz, PNA and PNA-X Series with frequency converter measurement capability enable engineers to fully characterize mixers and frequency converters up to 67 GHz. Users can measure magnitude-, phase-, and absolute-group-delay response without using reference or calibration mixer. Measurements can be done on devices requiring external local oscillator signals, or those with local oscillators that are not locked to system's 10 MHz reference.

Columbia Weather Systems, Inc.    Hillsboro, OR 97124
Nov 10, 2011 Compatible with Orion 420 (4-20 mA) weather station, WeatherMaster(TM) v4.0 provides computer weather monitoring, calculated parameters, graphing, and trend displays. It also automates weather data archival, alarm notification, CAMEO/ALOHA interfacing, and weather web page updating. While .NET platform accelerates development by facilitating feature additions and custom version development, expandable SQL database accommodates range of meteorological and calculated parameters.

Osensa Innovations Corp.    Coquitlam V3J0A3  Canada
Nov 10, 2011 Featuring DIN rail mount design, Model FTX-301 supports 3 fiber optic temperature inputs and includes 3 optically isolated 4-20 mA analog outputs, while Model FTX-302 is same device only without analog outputs. Both include industrial RS-485 serial bus for modbus communication to multiple daisy-chained devices. Providing real-time temperature data to 200°C, each device is configured and monitored via OSENSAView FTX software and direct USB connection to PC/laptop.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Nov 10, 2011 Using 81199A Wideband Waveform Center software and M8190A arbitrary waveform generator or Infiniium 90000 X-Series oscilloscope, design teams can verify overall performance of 60 GHz wireless devices. Combination also allows validation engineers to perform specific measurements with expected values for transmitters and receivers as defined in standard. Complete solution offers arbitrary waveform creation, frequency conversion, signal modulation, and spectrum analysis.

Emerson Process Management    Austin, TX 78754
Nov 10, 2011 Supporting conventional and intrinsically safe channel characterization modules (CHARM), DeltaV CHARM I/O Card provides flexibility in control system I/O topology. I/O can be added anywhere it is needed using standard Ethernet hardware. Each I/O channel has dedicated CHARM that provides signal characterization and galvanic isolation. Integrated inside CHARM, IS barriers provide single channel fault isolation as well as electrical isolation and energy limiting circuitry that meets IEC Ex ia ratings.

Invensys Systems, Inc.    Foxboro, MA 02035
Nov 09, 2011 Used as stand-alone device or as local historian to third-party equipment, Eurotherm nanodac Recorder/Controller interfaces directly with Wonderware Historian, providing secure, hardware-based local data acquisition and storage, along with information, analysis, and reporting software. With 50 MB of flash memory, as well as on-screen help system and remote viewing functionality, device allows plant-floor operators and supervisors to monitor health of process from virtually anywhere.

WAGO Corp.    Germantown, WI 53022
Nov 08, 2011 Simplifying simulators by replacing standalone frequency generators, rotating equipment, and associated cabling, 0-10 Vdc 859 Series mimics motor encoders to generate pulse inputs for controlling lighting or machine speed. Products can be factory-tuned to user-specified frequency within 3 ranges: 0-1.0, 0-1.5, or 0-25 KHz, and isolated versions are available for excessively noisy environments or applications with high potential differences between machinery.

Baumer Ltd.    Southington, CT 06489 1534
Nov 07, 2011 Able to withstand aggressive cleaning processes of food and beverage applications, GE404 features Viton seals and ShaftLock bearing. Latter minimizes downtime by enduring vibration and shaft loads during processing/cleaning. Leak-proof and IP67-compliant, encoders resist harsh washdowns with aggressive cleaning agents over entire service life. Optical sensing principle allows 14-bit, single-turn and 12-bit, multi-turn resolutions for precision positioning at velocities up to 10,000 rpm.

Calex Mfg. Co., Inc.    Concord, CA 94520
Nov 02, 2011 Featuring built-in 10 V excitation supply that can drive 350 W bridge, Model 8555 is designed for load cell, strain gage, or single ended analog amplification and filtering. Self-contained, DIN rail mount, DC powered module has 0-50 mV input range and makes connections via screw clamp terminal blocks. Measuring 3.78 x 1.06 x 1.65 in., signal conditioner is suited for conveyor weighing systems, hoppers, or tank farms.

WAGO Corp.    Germantown, WI 53022
Oct 31, 2011 Configurable channel-by-channel, IP67 SPEEDWAY Model 767-5801 with 8 x M8 connectors and Model 767-5802 with 4 x M12 connectors run in direct input, direct output, or mixed DIO modes. Modules record binary signals from sensors, proximity switches, and control actuators, and provide parameterization of filter, inversion, substitute value strategy, manual mode, and online simulation. Units can be configured with two 1 kHz counters with event, gateway time, or pulse duration modes.

Baumer Ltd.    Southington, CT 06489 1534
Oct 27, 2011 With 14-bit single-turn and 12-bit multi-turn resolutions, GE404 Series delivers precise positioning data at velocities up to 10,000 rpm. Leakproof, IP67-compliant encoders feature Viton seals and class 1.4404 or 1.4435 V4A stainless steel housings, enabling them to withstand harsh washdowns and aggressive cleaning processes. ShaftLock bearing minimizes machine downtime by enduring vibration and high shaft loads that occur during processing and cleaning.

JH Technology, Inc.    Sarasota, FL 34233 2432
Oct 24, 2011 Models JH7500/JH7501 plug into standard relay sockets and feature I/O isolation as well as AC or DC power options. Model JH7500 offers output ranges to 10 kHz, and Model JH7501 has relay contact output for electromechanical counters (FS pulse rates can be as low as 1.25 pulses/min). Range of input choices includes standard process signals such as 0-5 V, 0-10 V, 4-20 mA, and 0-1 mAdc as well as others.

Pentek Inc.    Upper Saddle River, NJ 07458
Oct 20, 2011 Based on Xilinx Virtex-6 FPGA preconfigured with data acquisition and playback IP, Cobalt(TM) 71651 has 2 input and 2 output RF channels, transformer-coupled to allow direct connection to HF or IF radio stages. Input channels feature 12-bit, 500 MHz A/Ds that feed data into Virtex-6 FPGA, while output channels incorporate TI DAC5688 digital upconverter that translates baseband signals to IF frequency up to 380 MHz. Dual 16-bit, 800 MHz D/As create real or in-phase and quadrature analog outputs.

BEI Sensors (BEI Industrial Encoders)    Goleta, CA 93117
Oct 20, 2011 Hollow shaft encoder, HS52, can operate directly in Division 1 and Zone 1 environments, where ignitable concentrations of flammable gases, vapors, or liquids are likely to exist under normal operating conditions. Product does not require accompanying intrinsic safety barrier, and enclosure can withstand and contain internal explosion of most volatile gas-to-air mixtures. Fitted with flexible shaft bore design, housing can be rigidly mounted.

Honeywell International, Inc.    Morristown, NJ 07960
Oct 18, 2011 Helping manufacturers optimize plant efficiency, OneWireless(TM) Adapter converts field devices that use HART protocol into devices that can transmit data over ISA100.11a-compliant wireless network. Adapter delivers reliable data communications in harsh industrial environments, and includes features that provide secure data encryption, extended battery life, and room for future expansion as plant needs change.

DATEL    Mansfield, MA 02048
Oct 13, 2011 Comprised of 12-bit current output DACs with TTL/CMOS-compatible inputs and 100 MHz conversion rate, DAC-12100 series suits applications such as radar, signal reconstruction, waveform generators, and communications equipment. Glitch energy characteristic of 3.0 pV-s minimizes generation of switching noise, and complementary current outputs of 0 to -20.48 mA can directly drive 50 ohm loads. Dynamic performance, to Nyquist at fOUT of 2.02 MHz, provides SFDR specification of -85 dB.

ZMDI    Dresden 01109  Germany
Oct 11, 2011 Offering 0.25% accuracy and one-pass, digital calibration, ZSSC3123 corrects 1st-order and 3rd-order nonlinearity errors. It connects to MCUs but can also be utilized in stand-alone designs for transducer and switch applications. IC can be configured to interface with 0.5-260 pF capacitive sensors, with sensitivity as low as 125 aF per digital bit. While operating current is as low as 60 µA over 2.3-5.5 V range, built-in sleep mode lowers consumption to less than 1 µA.

Electro Standards Laboratories    Cranston, RI 02921 3403
Oct 05, 2011 With integrated rate buffering, Model 4149 (desktop), Model 4149-DIN, and Model 4159 (board) operate from -40 to +85°C with typical speeds to 1.5 Mbps for RS232 to fiber conversion and up to 5 Mbps for RS485/422 to fiber conversion. Model 4149-DIN provides enclosure and all mounting hardware and brackets for installation in DIN-rail application. Model 4159 features front-mounting threaded brackets for rack mounting in embedded applications.

Data Device Corp. (DDC)    Bohemia, NY 11716-2482
Oct 05, 2011 Providing up to 4 independent channels, SB-36330CX can be configured for 11.8 V line-to-line synchro/resolver, 90 V line-to-line synchro, or 2 V sin/cos signal input, with 10, 12, 14, or 16-bit resolution. Each channel provides separate reference input which is auto-ranging to accept reference signal from 2-130 Vrms. Operating over industrial temperature range of -40 to +85°C, Model SB-3633CX includes AquadB encoder emulation outputs for motor control applications.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Oct 04, 2011 Featuring DIN rail mountable design, ION Analog Input Node accepts up to 12 analog sensor inputs and transmits data over Modbus RTU back to PLC or control system, while ION Discrete Node accepts up to 6 discrete sensor inputs and has 6 relay outputs to control local alarms or machinery shutdown. Mis-wire and short-circuit protected, modules offer at-a-glance status of power, communication, internal fault, and communication fault. Complete systems update in less than 1 second.