TR Electronic, Inc.    Troy, MI 48083
May 09, 2012 Combining integrated switch, modular construction for mechanical customizations, and extensive parameter configurations via network, CEx58 Series features optional working temperature of -20 to +70°C and IP65 protection class. EtherNet/IP treats network devices as series of objects and uses Common Industrial Protocol to access these objects. CIP offers wide range of messages and services to capture production automation data.

Kontron    Poway, CA 92064
May 08, 2012 Powered by 2x 1.6 GHz or 2x 1.86 GHz Intel® Atom(TM) CPUs (N2600/N2800/D2550), COMe-cCT6 features COM Express® pin-out type 6 design and 95 x 95 mm form factor. Interfaces include 3 digital display interfaces, such as 2x DisplayPort, HDMI/DVI, and 24-bit LVDS, and power management features include Intel® Deeper Sleep and Intel® Rapid Start Technology. Based on Intel® NM10 Express chipset, module offers various I/O and expansion options and Intel Graphics Media Accelerator 3600/3650.

MAC Panel Co.    High Point, NC 27263
May 08, 2012 Providing connectivity for two 18-slot PXI chassis, Dual Tier SCOUT Interface supports up to 8,400 I/O points and 8 external wiring slots. Direct Access Technology enables system designers to limit or eliminate traditional cabling by introducing pull-through interface adapter called Direct Access Kit. Through utilization of fully enclosed PCBs or fixed-wire connectivity solutions, DAKs allow addition of individual PXI instrumentation with no adverse effect on other system components.

Zentrum Mikroelektronik Dresden AG    Melville, NY 11747
May 07, 2012 Housed in 5 x 5 x 0.85 mm PQFN32 package, Model ZSSC1856 features two 18-bit Sigma/Delta ADCs with on-chip voltage reference. One input channel measures battery current IBAT via voltage drop at external shunt resistor, while second channel measures battery voltage VBAT and temperature. Device communication interface supports LIN 1.3, 2.0, and 2.1 specifications. AEC-Q100 qualified and specified for -40 to +125°C operation, IC is suited for automotive, industrial, and medical applications.

ABB Inc.    Wickliffe, OH 44092
May 04, 2012 Available as part of Symphony(TM) Plus plant automation platform, Symphony Plus Control HPC800 process controller accommodates applications that require modular DIN rail packaging. Ethernet-based plant network makes it suited for geographically distributed control applications in conventional or renewable power plants and water networks. Interface modules are available that expand connectivity of controller to intelligent electronic devices using PROFIBUS DP and HART communication protocols.

ICS Electronics Corp.    Pleasanton, CA 94588
May 03, 2012 Used for controlling digital devices via USB, Model 2003 interface board provides 40 parallel DIO lines that can be user-configured as inputs or outputs in 8-bit bytes. Data transfer can be accomplished directly to/from specific byte; by setting, reading, or pulsing individual bits in byte; and via strings of data characters to/from multiple bytes. Handshake lines are provided for synchronizing data transfers from external devices or for latching data into external devices.

National Instruments Corp.    Austin, TX 78759-3504
May 03, 2012 Featuring unlimited mechanical lifetime, NI PXI/PXIe-2543 switch module gives RF test engineers solution with which to optimize routing of RF signals up to 6.6 GHz. Solid-state architecture provides long life and integrated PXI triggering provides fast and repeatable measurements. Suited for multisite test, this 6.6 GHz dual 4x1 multiplexer, intended for high-density RF switching, features 50 ohm termination on all channels.

National Instruments Corp.    Austin, TX 78759-3504
May 02, 2012 Aggregating measurement data from distributed wireless sensor network nodes, NI 9795 C Series Gateway makes data available within deployed LabVIEW Real-Time applications running on CompactRIO. NI WSN-3230 and NI WSN-3231 Serial Nodes, featuring 1 RS232 port and 1 RS485 port, respectively, provide 2 digital I/O channels for discrete inputs, event detection, and programmatic control. Typical applications include environmental monitoring, industrial measurement and control, and energy monitoring.

Broadcom Corp.    San Jose, CA 95110
Apr 30, 2012 BCM7014 features integrated DVB-C tuner, demodulator, MPEG2 A/V decoder, regulators controller, A/V outputs, and RF modulator. It is designed to facilitate conversion from analog to digital TV reception in India. This cable set-top box system-on-a-chip solution features adaptive volume leveling support that maintains constant volume across commercial, program and channel changes. Conpact size consists of 2-layer reference design measuring 4 x 2.5 in.

Elemental LED    Emeryville, CA 94608
Apr 26, 2012 Apollo Jammer connects variety of color-changing LED light products to audio device so lights flash and change colors in response to music and sounds. Two-button control system lets user choose from 9 color changing modes as well as adjust sensitivity for appropriate level of color-changing intensity. Along with 12 V power adapter, Apollo Jammer comes with 1 ft of color-changing LED strip light, RCA plug to stereo jack adapter, audio jack extension, and 2-way audio splitter.

PESA Industries, Inc.    Huntsville, AL 35805
Apr 25, 2012 Available in 22 configurations, easyPORT Throw Down Converter Boxes are based on 4-port utility switch, which incorporates standard SFP-type pluggable module card cages that can be populated to support any combination of I/O signals, including HDMI/DVI, 3G-SDI, ASI, NTSC/PAL, and IP-to-ASI conversion. All video formats are transcoded or converted internally, and signals can be distributed over several possible transmission paths, including coax, fiber, and CATx for IP.

For-A    Cypress, CA 90630
Apr 18, 2012 FRC-30 can be switched between motion compensation and linear conversions to deliver optimal results for varying source material. Compensation mode detects motion vector amount of moving object and generates its motion in frames, while linear conversion mode bases frame conversion on previous and next frames. Along with built-in up/down/cross converters, product offers support for several video formats, includes HD/SD-SDI and analog composite I/O, and measures 1 RU high and ½ RU wide.

RedMere Technology Ltd.    Co. Dublin   Ireland
Apr 10, 2012 Housed inside connector of thin HDMI eco-friendly cables, PRE169x Series achieves data rates of 3.4 Gbps per channel up to 20 m in length. Modules support 4K2K and 3D rates as well as 1440p DTV resolution, 16-bit color depth, and 120 Hz refresh rates. Embedded technology provides active equalization functionality without requiring external power source, compensating for signal attenuation on differential TMDS data inputs.

Novatel Wireless, Inc.    Calgary T2E 7H7  Canada
Apr 09, 2012 Measuring 28 x 25 x 4.5 mm, Enabler® HS 3001 CDMA2000 1X Module keeps enterprises connected to business-critical data anywhere, anytime. FOTA-enabled module supports voice, SMS, UART/USB interfaces, and packet data TCP/IP and UDP/IP software stack with packet assembler and disassembler. Compatible with N4A Communications and Management Software platform, module is suited for security, alarm, telemetry, asset tracking, POS, mHealth, AVL, and AMI/AMR applications.

PESA Industries, Inc.    Huntsville, AL 35805
Apr 06, 2012 Based on E-DXE Enterprise Data Exchange Engine, 24-bit, 96 kHz DRS Series uses high-speed multiplexing technology for signal distribution. DXE frame provides all essential signal processing features, including input sample rate conversion, input gain, and phase inversion. DRS Series-C uses internal control card to support 64 mono I/O in 1 RU frame, while DRS Series-M supports four 512 x 512 I/O frames and DRS Series-E supports up to five 1,536 x 1,536 I/O frames.

INOVA Geophysical Equipment Limited    Stafford, TX 77477
Apr 05, 2012 Using fiber optic baselines, Model G3i(TM) targets over 100,000 channels in real-time for complex surveys. Power-down-the-line functionality eliminates field station battery dependency and minimizes amount of equipment required during deployment. Managing source-driven high productivity vibroseis operations with continuous recording, cable-based system supports 2D, high-density 3D, and time-lapse 4D seismic operations. Ruggedized, self-contained ground electronics withstand extreme environments.

Analog Bits Inc    Mountain View, CA 94041
Apr 05, 2012 With SERDES IP, customers can use cables with SERDES at either end to recover and retime signal. Pin-configurable macro uses standard CMOS logic process devices and exhibits optimal input sensitivity, jitter tolerance, and equalization. With 0.095 mm² active silicon area per lane, IP is suitable for variety of flip-chip and wire-bound packages embedded in connectors. Serial client interfaces can connect directly to SFPs and operate over frequencies from 125 Mbps to 12.5 Gbps.

XKL, LLC    Redmond, WA 98052
Apr 05, 2012 Featuring 1RU form factor, 100G DWDM Universal Starter Kit will boost optical channel rates to 100G per lambda. Design supports 10G and 100G on client side; 100G optical transport systems are designed to deploy as requirement for higher bandwidth applications and to aggregate internal service elements within carrier networks. For WAN and backbone regional networks, spectral efficiency is important in system engineering design.

Weidmuller, Inc.    Richmond, VA 23236
Apr 04, 2012 Providing multi I/O and/or gateway functionality, 900 MHz Model WI-I/O-9-U2 uses IP-based addressing to deliver mesh/self-healing network communications, multi-hop repeating, and remote over-the-air re-configuration and diagnostics. FHSS device features 1 W transmit/receive power and 128-bit AES encryption for secure communications. For applications that require Modbus TCP/RTU Gateway, device can be upgraded via software key, without need to rewire or take system out of commission.

RDP Electrosense, Inc.    Pottstown, PA 19465
Mar 29, 2012 Used in stand-alone or panel-mounted mode, Model E725 enables local display of transducer values from variety of sources, including displacement, pressure, load, and torque, to be incorporated into control panels. Unit features 5-digit display with peak and valley detection, limit trips shown by indicator lights, and optional mechanical or solid state relay outputs. In addition to serial communication via RS232 or RS485, Model E725 has analog output that can be connected to input on PLC.