Test & Measuring Instruments ->
Instrumentation I & O Devices|
Instrumentation I & O Devices
(Showing headlines 2041 - 2060) << 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 ...
Server is designed for ETX and PC/104-based industrial I/O.
ACCES I/O Products, Inc.
San Diego, CA 92121 1506
May 12, 2006
Providing support for I/O line of USB and PC/104 I/O modules, NANO I/O Server utilizes any embedded ETX CPU board that meets ETX standard for processing. It features CPUs up to 1.8 GHz Pentium M, RS-232 and RS-232/422/485-selectable COM ports, and 10/100 Ethernet LAN. With 120 mm motherboard, right-angle mounted connectors include VGA, 4 USB 2.0 ports, and PS/2 mouse and keyboard. Using PC/104 I/O modules, it can function as complete, small, and self-contained DAQ system.
Personal Data Terminal uses RFID for mobile data capture.
Dietze Enterprises, Inc.
Chicago, IL 60654
May 10, 2006
Model NOMAD-RF(TM) lightweight, hand-held personal data terminal allows tradeshow exhibitors to collect information at shows where RFID technology is being used. Measuring 7.8 x 3.1 x 2 in. and weighing 11 oz, battery-powered terminal sends signal to RFID-encoded badge, and then collects, stores, and displays attendee's contact data in less than 1 sec. No line of sight is needed to collect data from badge, and it remains powered through length of tradeshow without recharging.
Incremental Encoders survive tough environmental conditions.
SICK STEGMANN, INC.
Dayton, OH 45413
May 09, 2006
Providing up to 10,000 pulses/revolution, blind hollow-shaft Series DGS65 features IP65/66-rated housing with collets for shaft diameters of 6, 8, 10, and 12 mm. Units are available with connector or cable outlet, and TTL or HTL electrical interfaces. They are suited for use in machine tool, textile, woodworking, and packaging applications.
Interface Controllers suit datacenter networks.
Santa Clara, CA 95054
May 08, 2006
Intelligent NIC(TM) multi-protocol, intelligent network interface controllers offer dual 10 GbE and native PCIe functionality. Software- and firmware-upgradeable products enable server systems to evolve with changing market needs and adapt to various datacenter workloads. Chip- and board-level devices use operating-system-agnostic approach to protocol offload, and achieve high throughput and low latency suitable for clustering and storage applications.
Multiplexer works over STM-1/OC-3 telecom circuits.
A.R.G ElectroDesign Ltd.
Gloucestershire GL7 1RT United Kingdom
May 08, 2006
Operating at 155.52 Mbps, 1915 Media Combiner allows up to 8 different tributary signals (MPEG, data, or G.703) to be combined into single interface for transparent transport. Available tributary cards include dual DVB/ASI, dual LVDS(SPI), and dual T1/E1 telephony interfaces; up to 4 tributary cards can be installed. Along with variable-rate multiplexing, features include menu-based front panel display, optional internal web server, and dual-redundant internal power supplies.
Single Board Computer includes on-board data acquisition.
Diamond Systems Corporation
Mountain View, CA 94043
May 08, 2006
Featuring automatically autocalibrating A/D circuitry on single board, EPIC Poseidon SBC comes with fanless 1.0 GHz VIA Eden ULV or 2.0 GHz VIA C7 processor, both with 256 KB on-chip cache and 400 MHz FSB. It includes 256 or 512 MB, 533 MHz DDR2 RAM soldered on board for resistance to shock and vibration. Data acquisition circuit provides 32 16-bit analog inputs with 250 KHz sampling rate, 4 12-bit analog outputs, 24 programmable digital I/O lines, and 2 counter/timers.
Multiplexer solves clock recovery and synch problems.
Neenah, WI 54957
May 08, 2006
Supporting 1-8 T1/E1 connections per link, Flanger Backhaul(TM) units enable point-to-point multiplexing of T1/E1 traffic across wired and wireless Ethernet devices. They provide last mile T1/E1 transport across distances limited only by capabilities of selected radio and can also connect PBX systems in remote office environments. Units also allow multiplexing of LAN traffic along with T1/E1 payload, where LAN traffic utilizes available bandwidth in connection.
Signal Conditioner is suited for strain gauge sensors.
Electro Standards Laboratories
Cranston, RI 02921 3403
May 05, 2006
CellMite(TM) Model 4337 Digital Signal Conditioner connects to strain gauge transducer and simultaneously generates serial output for direct connection to PC and scalable ±10 V analog output for interface to DAQ systems. It has storage for 3 calibrated sensors, each with integrated 6-point calibration and independent display setup parameters. Auto-detect feature for TEDS-Tag(TM) capable sensors automatically loads their stored calibration data and display configuration.
Signal Conditioners utilize Windows-based control software.
PCB Piezotronics Inc.
Depew, NY 14043 2495
May 05, 2006
Rack mounted Models 481A and 498A, with 101 Option for computer interface, are supplied with software that presents device settings in spreadsheet table view and is capable of controlling 16 units with 16 channels each, for total of 256 channels. Clicking software's discovery button begins process by interrogating connected units and populating table with each unit's current settings. Software includes reporting tool and ability to save and restore system settings.
Service Suite offers intelligence to assess oil/gas assets.
Implicit Monitoring Solutions
Dallas, TX 75234
May 05, 2006
Subscription-based Intellisite Service Suite provides all components required to manage remote oil and gas producing assets. Remote technology services provide firmware that enables Intellisite services to work with existing monitoring devices or satellite communication-ready asset monitoring devices. Intellisite Data Center houses and protects information while ensuring reliable client access, and Intellisite software creates reports, forecasts, and analyses.
PCI Kit is compliant with PCI Express specification v1.1.
San Jose, CA 95124 3400
May 04, 2006
PCI Express Starter Kit uses PCI Express IP core from Xilinx LogiCORE(TM) portfolio. Kit consists of reference board with 1 mil gate Spartan-3 FPGA, Philips PHY, DDR memory, Flash memory, evaluation versions of Xilinx Integrated Software Environment (ISE(TM)) Foundation, and Embedded Developer Kit design software suites. It enables deployment of PCI Express capabilities for applications like add-in cards, host bus adapters, graphics cards, and high-end servers.
Flow Signal Conditioner provides 4-20 mA or 1-5 Vdc output.
Omega Engineering, Inc.
Stamford, CT 06907
May 03, 2006
Offered with NEMA 4 (IP66) enclosure and CE approval, Model FLSC-45B dc powered frequency-to-analog output signal conditioner accepts low level magnetic pickup signal or high level dc pulse from flow paddlewheel sensor or turbine meter without amplification and converts it into analog output. It features ±0.15% of full scale accuracy, ambient operating temperature of 20-70°C, and operates on 15-32 Vdc with .025% repeatability.
Digital Transducer Conditioner offers 4 input cards.
RDP Electrosense, Inc.
Pottstown, PA 19465
May 01, 2006
Offering push-button configuration, dual-channel networkable Model E725 features microprocessor with mathematical package that provides fast peak and valley store, remote/auto zero, signal hold, and user linearization to 10th order. Device features 5-digit display with 22-bit A to D resolution and incorporates signal conditioning for LVDTs, load cells, pressure transducers, and transmitters. It provides high bandwidth analog output of at least 250 Hz.
Input Module adds extra functionality to motion controller.
Delta Computer Systems, Inc.
Vancouver, WA 98682
Apr 28, 2006
Exp70-Q1 quadrature encoder input module for 1- and 2-axis RMC70 Series Motion Controllers includes A and B quadrature inputs plus one 12-24 Vdc high speed registration input. Single channel, ½ axis, position or velocity reference input enhances RMC70 for geared applications. Up to 32 units can be daisy-chained for gearing up to 64 axes. Module has bi-color status LED to indicate proper functioning and fault states.
Control System manages multiple parallel tasks.
Batavia, IL 60510
Apr 27, 2006
Multifunctional sigmaPAC® comes with controls for variables such as temperature, pressure, flow, level, and position; logic and sequence functions; and process calculations. Configurable alarm relay digital output, Watchdog and Wake Up digital output, and one digital input are part of onboard I/O. Featuring CANopen, Ethernet 10baseT, and RS232 interfaces, modular controller allows for development of centralized or distributed solutions without modifying or adding components.
Interface Card utilizes active-active multiplexer.
Fremont, CA 94538-6532
Apr 27, 2006
Based on AAMUX technology with installed base of over 400,000 ports, Model SS9130 Interposer Card provides storage system manufacturers with solution for adding SATA hard drives to enterprise storage systems. It consists of SS1300 active-active multiplexer device, dual SATA or SAS-STP host interface, SATA device interface, and support components and layout circuitry for connecting SATA drives to SAS or adapted Fibre Channel infrastructure.
Analog Output Module simulates voltage or thermocouple output.
Highland Technology, Inc.
San Francisco, CA 94103
Apr 26, 2006
Providing 16-bit resolution over 10 output voltage ranges from ±25 mV to ±12.5 V, 16-channel Model V470 delivers user-programmed voltage outputs or thermocouple simulating outputs with automatic reference-junction temperature compensation. Featuring 1 kV isolation, each channel can be programmed independently to any voltage or thermocouple range, and can source up to 10 mA at FS. Single-width, 6U VME board includes 2 front-panel D25 connectors that interface with external devices.
Signal Conditioner suits linear displacement transducers.
Burlington, VT 05402
Apr 25, 2006
Intended for micro-miniature DVRT® displacement sensors, DEMOD-DC® In-Line Signal Conditioner filters incoming transients from line voltage and supplies sine wave excitation to transducer. Operating on 6-16 Vdc, device uses 3-wire connection and includes digitally trimmed offset and gain. Precision demodulator provides rectification and differential amplification, and analog output is filtered and buffered to provide clean output signals at up to 20 KHz.
I/O Modules work with Compumotor controllers.
Automation Systems Interconnect Inc.
Mechanicsburg, PA 17055
Apr 21, 2006
Models IMDS15 and IMDS25F are screw terminal to D-sub connector modules that feature component holes on PCB, screw-lock connectors, clearly marked terminal blocks, and position on board for labeling module. Model IMRC50 screw terminal to 50-position ribbon cable connector includes all features as listed on D-sub I/O interface modules. Sharing same dimensions, all modules come in similar black housing with blue printed circuit board.
HDMI Switches suit high-bandwidth video applications.
Pericom Semiconductor Corp.
San Jose, CA 95131
Apr 21, 2006
Models PI3HDMI412-A, PI3HDMI412-B, PI3HDMI412FT, and PI3HDMI413 High-Definition Multimedia Interface (HDMI) switches are suited for multi-source/multi-sink video applications including TV, monitor, set-top box, switch box, and KVM. High-bandwidth differential switch devices are used to transfer HDMI and DVI digital video signals from source to display. Housed in lead-free package, switches offer low signal degradation and are ESD tolerant.
(Showing headlines 2041 - 2060) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160