Test & Measuring Instruments ->
Instrumentation I & O Devices|
Instrumentation I & O Devices
(Showing headlines 1821 - 1840) << 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 ...
PCI Bus I/O Control Card suits gaming machine applications.
Cypress, CA 90630
Jan 12, 2007
Featuring 32-bit 33 MHz 5 V/3.3 V PCI bus, Model AR-B2002 accommodates gaming machine controls with 88 channels programmable digital I/O, 4 x 16-bit programmer timer, and 512 Kb battery backup SRAM. Capable of supporting Windows XP and Linux device drivers, product also includes 8 channels, 16 events intrusion logger, and 8-bit DIP switch readback.
DAQ Cubes feature fiber optic interface.
United Electronic Industries
Canton, MA 02021
Jan 11, 2007
Based on 100BASE-FX, DNA-FPPC Series of Data Acquisition and Control Cubes each consist of core module with processor and network interface, along with 3 or 6 open I/O slots or layers. Fiber optic interface extends max distance between PowerDNA I/O Cube and host computer from to 2 km. Single-mode fiber interface is also available, extending max distance to 20 km. Fiber is virtually immune to EMI and offers infinite electrical isolation between host computer and I/O Cube.
Power Filter protects AV environments from surges, noise.
American Power Conversion
West Kingston, RI 02892
Jan 11, 2007
APC AV C3 Power Filter delivers surge protection and isolated noise filtering to help eliminate power anomalies such as surges, spikes, or EMI/RFI that threaten AV component hardware, signal integrity, and system availability. Featuring 8 outlets, unit offers surge protection efficiency with less than 85 V let-through rating. Gold Coax connections and phone jack surge protection provide additional safeguard for incoming signals on dataline.
DAQ Device suits portable sensor applications.
Newbury Park, CA 91320
Jan 10, 2007
Featuring programmable gain from 0.5-1,000x in 10% steps, Model SX8722 interfaces with most Wheatstone bridge chemical, pressure, or magnetic sensors to condition and read data. ZoomingADC(TM) 16-bit analog/digital converter with 10-bit preamplifier allows device to zoom in on small portion of analog signal and apply full 16-bit ADC to that part of signal. With this capability, Model SX8722 can directly connect to sensors ranging from 5 V chemical to 2 mV magnetic without external amplifier.
Combo Sample Rate Converter suits pro audio applications.
Texas Instruments Inc. / Tiris Division
Dallas, TX 75243
Jan 10, 2007
Supplied in 48-lead TQFP packages, SRC4392 integrates 2-channel asynchronous sample rate converter with digital audio interface receiver and transmitter. It features 144 dB dynamic range, -140 dB distortion, and up to 216 kHz sampling rates, making it useful for broadcast audio applications. Product operates from +1.8 V core supply and +3.3 V DIO supply. SPI or I2C interface provides access to on-chip registers and data buffers.
Digital I/O Card has 48-channel architecture.
Advantech Automation Corp.
Cincinnati, OH 45240
Jan 08, 2007
Suited for 3.3 and 5 V PCI bus signaling, PCI-1739U uses Opto-22 compatible, 50-pin connectors for interfacing to various signal conditioning and termination options. Interrupt function can output digital signal synchronized with internal PC interrupt generated by card. With power-on state of outputs configurable via dip switches, this 48-channel digital I/O (DIO) universal PCI card operates over 0 to +65°C range and offers digital output status read-back.
Controller provides classroom A/V control.
Extron Electronics, Inc.
Anaheim, CA 92805
Jan 08, 2007
Designed to centralize control of classroom presentation system, MediaLink(TM) MLC 104 IP Plus features built-in IP Link® Ethernet control and is configurable using Global Configurator software. It includes 3 digital I/O ports for controlling switches and relays, and supports optional Infrared Control Modules for controlling sources such as VCRs and DVD players. MLC 104 IP Plus standardizes A/V system user control interface and eliminates need for multiple handheld IR remotes.
Spur Blocks provide I/O management.
Plymouth, MN 55441
Jan 05, 2007
Offering DIN rail mounting in IP 20 design, JRBS Series provides way to distribute field devices for FOUNDATION(TM) fieldbus and PROFIBUS®-PA. All units contain selector switch for segment termination, and allow segment to be continued for distribution of instruments in other locations. Featuring aluminum housing with temperature rating of -13 to 158°F, JRBS products come in 4, 6, or 8-port configurations, and contain LED indication of spur status and segment power.
SSH Console Serial Switch enables flexible networking.
Network Technologies, Inc. (NTI)
Aurora, OH 44202
Jan 04, 2007
SERIMUX®-SCRP-x delivers secure management of up to 32 serial devices via Internet, TCP/IP network, or dial-up modem connections. Combining Secure Shell v2 security with unlimited access to remote network management, product supports embedded server management technologies such as Intelligent Platform Management Interface, Dell Remote Access Cards, and HP Integrated Lights Out. Native support of IPv4/IPv6 dual protocol stack provides flexible networking support.
Delta-Sigma ADC comes in 6-pin, SOT-23 package.
Microchip Technology, Inc.
Chandler, AZ 85224 6199
Jan 03, 2007
Along with integrated oscillator, 18-bit MCP3421 incorporates voltage reference and programmable gain amplifier (PGA) on-chip. It uses I2C(TM)-compatible serial interface and operates from one 2.7-5.5 V power supply. Power consumption rate of 155 µA @ 5 V continuous conversion helps extend battery life in portable measurement devices, while onboard PGA provides for selectable gains of x1, x2, x4, or x8 before analog-to-digital conversion takes place.
Serial Transceiver includes equalizer technology.
San Jose, CA 95110
Jan 03, 2007
Leveraging DSP technology, BCM8706 10GbE PHY device enables IT professionals to preserve existing multi-mode and single-mode fiber infrastructures by providing upgrade path from 1 to 10 Gigabit Ethernet. DSP equalizer provides optimal performance over 300 m of multi-mode fiber. In support of SFP+ optical module standard, BCM8706 incorporates multi-tap transmit pre-emphasis to compensate for FR-4 board material loss in line card applications.
DAQ System provides stress analysis testing.
Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Jan 03, 2007
Designed for use with Micro-Measurements StrainSmart® software, System 7000 enables users to acquire, reduce, and present data from strain gages and all related sensors. It provides ±0.05% FS accuracy and scan rates up to 2,048 samples/sec. Users can intermix strain gages, strain-gage-based transducers, thermocouples, and other sensors in groups of 8 by choosing appropriate sensor card for up to 128 channels in 4U, 19 in. rack-mountable scanner.
Digital I/O Modules implement user-configurable FPGA.
Wixom, MI 48393 7037
Jan 02, 2007
Industry Pack IP-EP200 Series I/O Modules interface digital I/O signals to user-configurable Altera® Cyclone(TM) II FPGA. Several models are available to accommodate RS-485 differential, TTL, or LVDS digital I/O signals. All modules feature Cyclone II EP2C20 FPGA device with 20K logic elements, 240 Kb RAM, and 26 embedded multipliers. Series IP-EP200 allows users to develop and store their own instruction set in FPGA for adaptive computing applications.
Temperature Input Devices offer wireless operation.
Measurement Computing Corp.
Norton, MA 02766
Dec 29, 2006
Utilizing RF modules that operate within ISM 2.4 GHz frequency band, Models WLS-TC and WLS-TEMP enable users to acquire and process temperature data for monitoring and control at distances up to 150 ft indoors, and as much as 2,460 ft line-of-sight outdoors. WLS-TC supports 8 channels of J, K, R, S, T, N, E, and B type thermocouples, while WLS-TEMP supports 8 channels of data from same thermocouple types in addition to RTDs, thermistors, and semiconductor temperature sensors.
Signal Conditioners provide 2,000 Vrms optical isolation.
Absolute Process Instruments Inc.
Libertyville, IL 60048
Dec 26, 2006
Offering 2 channels of signal isolation and retransmission, DuoPak(TM) Signal Conditioners can be custom-configured to accept any 2 process signal inputs including DC voltage or current, AC voltage or current, frequency, potentiometer, or RTD temperature. Two optically isolated output channels can be configured for standard or custom DC voltage or current signals. Units include I/O LoopTracker® LEDs and functional test pushbutton for testing output independent of input signal.
Bi-Directional Translator targets low-voltage applications.
Fairchild Semiconductor Corp.
South Portland, ME 04106
Dec 19, 2006
Measuring 0.55 x 1.6 x 2.1 mm, dual-supply Micro-Pak(TM)-packaged Model FXL2TD245 is configurable for uni-directional and independent bi-directional voltage translation between 2 logic levels. It includes built-in power-off protection and provides outputs that switch to 3-stage if either supply voltage is equal to ground. With voltage range of 1.1-3.6 V, unit is suited for cell phones, PDAs, gaming devices, and other portable applications, as well as consumer and industrial applications.
Interface Device is IP67 rated.
Richmond, VA 23236
Dec 18, 2006
Offered in epoxy sealed PBT housing with flammability rating of UL 94 V0, JACKPAC® is designed to address signal conditioning in industrial environments. Device uses M12 connector to integrate in sensor actuator cabling, and helps introduce interface device into circuit without need for enclosure/control panel. Product is available in configurations like form C relay output, pulse stretching module, over-voltage protection module, and signal isolator.
Incremental Encoders suit lift engineering applications.
Pepperl + Fuchs, Inc.
Twinsburg, OH 44087 2245
Dec 18, 2006
Developed specifically for mechanical drive and lift engineering applications, RHI90N Series provides pulse counts up to 2,500 ppr at 10-30 Vdc. Metal plate ensures accurate operation in application environments prone to extreme shock and vibration. With nominal outer dimension of 90 mm, units offer variable hollow shaft diameters from 16-45 mm. Hollow shaft configuration enables encoders to be directly coupled to application's shaft without additional couplings.
Evaluation Board helps develop audio and video applications.
Surf Communication Solutions, Inc.
Arlington, MA 02474-8401
Dec 18, 2006
SurfRider/AMC-EVM(TM) enables user to design, debug, and experiment with TI's digital signal processors (DSPs)and network interfaces from desktop, utilizing same resource board for all stages in developmenet cycle. Product includes SurfRider/AMC, fully integrated RoHS-compliant AMC DSP resource board along with SurfDocker(TM) modular plug-in, and 2 TI TMS320C6412 DSPs. SurfRider/AMC supports PICMG® SFP I-TDM protocol over Gigabit Ethernet for transporting audio, video, fax, and modem traffic.
Digital-to-Analog Converter has 1.3 GS/sec conversion rate.
Fujitsu Microelectronics Inc.
San Jose, CA 95134 1804
Dec 15, 2006
Housed in 12 x 12 mm EFBGA package, CMOS 14-bit Model MB86065 provides direct-IF frequencies above 400 MHz. Single-channel unit integrates Waveform Memory Module, which enables waveforms to be downloaded and executed on-chip, minimizing need for high-speed data generator. Model MB86065 offers system partitioning solution with digital pre-processing using 0.65 micron ASIC or FPGA technology.
(Showing headlines 1821 - 1840) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160