SICK STEGMANN, INC.    Dayton, OH 45413
Apr 27, 2007 Allowing users to freely program width of zero pulse and number of lines from 1-8,192, Model DRS26 CoreTech® Incremental Encoder can be programmed at any time, in any location, for any application. Offered in 2.5 in. housing, it features opto-ASIC with chip-on-board technology and automatic light regulation. Square flange, servo flange, and face mount versions are available with 0.25 and 0.375 in., and 10 mm solid shafts.

VEGA Controls Ltd    West Sussex RH15 9NF  United Kingdom
Apr 27, 2007 PLICSRADIO field transmitter accommodates up to 3 transmitters and 2 switches, using combination of 4-20 mA HART and 2 digital relay or NAMUR inputs, and can also provide power to sensors. ATEX-approved device has range potential of 1.6 km and features in-head display to show radio signal strength and data. Configuration and diagnostics are accomplished using internal programmer, or can be done remotely via PC using FDT/DTM and PACTware software.

Linear Technology Corp.    Milpitas, CA 95035
Apr 26, 2007 Housed in 4 x 3 mm DFN package and consuming 300 µA, 4-channel LTC2493 measures 4 single-ended or 2 differential analog inputs, and communicates over 2-wire, I2C-compatible serial interface. It performs conversions at rates of 15 Hz or 7.5 Hz while using internal oscillator. Easy Drive(TM) technology enables rail-to-rail inputs with zero differential input current. Offering 1/30°C resolution and 2°C absolute accuracy, temperature sensor enables temperature compensation of external sensors.

Heidenhain Corp.    Schaumburg, IL 60173-5337
Apr 17, 2007 Offered as modular systems, ExN 425/437 and ExN 1325/1337 rotary encoders for electrical drives feature EnDat 2.2 transmission component (digital, bi-directional interface). Products enable safety-related systems to be designed with one encoder per axis, and encoder/interface combination helps machine and plant manufacturers realize benefits of serial data transfer, including online diagnostics, automatic commissioning, and accelerated formation of position value.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 17, 2007 Intended for process monitoring/control applications, In-Process Force Measurement system consists of Series M240 ICP® Strain Sensor and Model 410A01 ICP® signal conditioner. System features Peak Hold that allows older PLC systems to stay in synch with high-speed production cycles, while signal conditioner captures/holds peak reading until PLC can scan for value. Solid-state relay resets peak hold value, ensuring high reliability force measurement for fast machine cycles.

Aitech Defense Systems Inc.    Chatsworth, CA 91311
Apr 17, 2007 Analog Model S930 and digital Model S940 FPGA-based cards enhance real-time communication and I/O functions between control subsystems and external subsystems. Both feature triple redundant buffer memory and can generate interrupts, eliminating need for onboard processor to manage I/O. Onboard BIT circuitry and logic enable self-monitoring. Conduction-cooled cards come with component screening to NASA GSFC 311-INST-001A Level 2, making them suited for high density aerospace applications.

Invensys Systems, Inc.    Foxboro, MA 02035
Apr 16, 2007 Plug-in I/A Series migration cards enable upgrade of legacy Moore APACS ACM and ACM+ control systems to I/A Series DCS and InFusion ECS technologies. I/O modules are designed to plug directly into existing system racks, and swapping can be accomplished without replacing existing field wiring, termination assemblies, system enclosures, or power supplies. APACS per-channel configurable I/O approach is retained, and APACS ProcessSuite graphics can be re-used within InFusion View HMI.

National Semiconductor Corp.    Santa Clara, CA 95051-0695
Apr 16, 2007 Featuring transmit pre-emphasis and receive equalization for 9 ps jitter performance, single-channel Models DS25BR100, DS25BR110, and DS25BR120 are optimized for high-speed signal transmission over FR-4 backplanes and cables used in communications, storage, and imaging systems. Fully differential signal paths ensure signal integrity and noise immunity. Offered in 8-pin LLP® packages, 100 mW units provide 7 kV ESD protection and are suited for buffering signals from 90 and 65 nm FPGAs and ASICs.

EMCORE Corporation    Albuquerque, NM 87123
Apr 13, 2007 Intended for long reach, 10 Gbps applications, DWDM Model EDW-9100-XFP consists of transmitter with cooled 1,550 nm EML and high-sensitivity receiver with APD photodetector. Transceiver operates over temperature range of 0-70°C and offers optimum heat dissipation and electromagnetic shielding, enabling high port densities for 10 Gbps systems. Key options include C-Band and L-Band coverage at 100 GHz ITU-grid spacing, as well as private labeling.

Harris Corp.    Melbourne, FL 32919
Apr 13, 2007 Optimized for public safety operations, Harris integrated solutions suite offers total content delivery solution. It addresses requirements such as internal communications within local and state municipalities, traffic management and transit communications, emergency broadcasting, geospatial asset management, and video surveillance. Suite also provides broadcast solutions to support video, audio, and data transmission within and among city, county, state, and Federal agencies.

Renco Encoders, Inc.    Goleta, CA 93117
Apr 12, 2007 Along with TTL output resolution up to 8,192 cycles per revolution, R35i offers 500 kHz output frequency capability and can be used with motors running at over 3,500 rpm. Mounting tolerances allow up to ±0.010 in. of shaft axial motion, and encoder can be ordered with additional commutation signals for 4-, 6-, 8-, and 10-pole brushless motors. Integral slide/gap mechanism requires ±20° rotation of encoder to align commutation signals with motor poles.

INTEG Process Group, Inc.    Wexford, PA 15090
Apr 11, 2007 Designed to link machine data from plant floor directly to SQL database via Ethernet, OMS Operation and Maintenance System makes machine statistics and efficiency available in central database that can be transferred to any ERP system. All interfaces for OMS are written in Microsoft ASP.Net, so access is available from any location on net with correct privileges.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Apr 11, 2007 Agilent 82357B provides direct connection from USB port on laptop or desktop PC to GPIB instruments. It features Hi-Speed USB 2.0 connectivity, and provides read performance for small block transfers in most buffer size ranges. Parallel polling allows response check from up to 8 instruments on single poll, and device includes industry-standard VISA I/O libraries software, so existing GPIB programs can be reused without modification.

Envivio, Inc.    South San Francisco, CA 94080
Apr 10, 2007 To support Chinese conversion to all-digital broadcasting infrastructure, Telco-grade Envivio® 4Caster(TM) B3, based on Intel® Core(TM) microarchitecture, supports both AVS and AVC/H.264 and enables upgradeable deployments through use of updateable firmware.

United Electronic Industries    Canton, MA 02021
Apr 09, 2007 UEIModbus Cube is rugged, Ethernet-based data acquisition and control interface that functions as Modbus slave accessed by any software client acting as Modbus master. With temperature range of -40 to +85°C, they withstand 50 g shock and 5 g steady vibration. Six-slot Model 600 measures 4 x 4 x 5.8 in. and supports up to 150 analog inputs or 288 digital I/O, while 4 x 4 x 4 in. 3-slot Model 300 offers 75 analog or 144 digital I/O channels.

austriamicrosystems AG    Premstatten   Austria
Apr 06, 2007 Fully qualified to AEC-Q100, 10-bit AS5140H is suited for harsh automotive and industrial applications with high ambient temperatures. Three differently programmable incremental outputs are available, one which delivers 3-phase commutation signal for brushless DC motors With resolution of 0.35°, IC can recognize 1,024 positions within one 360° turn, accessible with serial or PWM interface. Daisy chain mode allows position data to be read serially over 2-wire bus.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 06, 2007 Intended for ICP®, IEPE, and charge output piezoelectric sensors, Model 482C54 is compatible with accelerometers, microphones, pressure transducers, force sensors, and strain sensors. It has frequency range of 0.05-100 kHz with ±10 V input voltage and ±100,000 pC input charge range. Featuring 4th order 10 kHz low-pass Butterworth filtering, unit is suited for vibration testing, automotive and aerospace component testing, and HALT/HASS/ESS applications.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 05, 2007 Used with charge output piezoelectric accelerometers, as well as force and pressure sensors, Models 422E91, 422E92, and 422E93 offer conversion sensitivities of 0.1, 1.0, and 10 mV/pC, respectively, with frequencies from 1.5 Hz to 50 kHz. Units are 1.6 in. long x 0.25 in. dia with stainless steel housings and 10-32 coaxial I/O connectors. TEDS option permits channel identification, sensitivity interrogation, and coordinate location information to be stored in onboard memory circuit.

Vertilon Corporation    Westford, MA 01886
Apr 05, 2007 Designed for use with multi-element optical sensors, PhotoniQ IQSP480 (32-channel) and IQSP482 (64-channel) achieve 96 dB dynamic range at event rates over 50,000/sec and 25,000/sec across all channels, respectively. Event data is output through USB connection and can be displayed on PC using included GUI or streamed to real-time custom software application. Instruments suit applications utilizing multi-anode photomultiplier tubes (MAPMT) and avalanche photodiode (APD) arrays.

esd electronics, Inc.    Hatfield, MA 01038
Apr 04, 2007 Compliant with ISO 11898 and CAN 2.0B, CAN-PCIe/2000 for PCI Express includes complete opto-isolation, which optimizes reliability and protects CAN board from voltage surges and other electrical interference. Using 2 CAN channels allows access to 2 independent CAN networks, which may run at different baud rates. Board includes CAN monitoring and analyzing software tool as well as extensive programming interface.