ComRent International, LLC    Owings, MD 20736
Sep 05, 2012 ComRent Cx Monitor(TM) helps stakeholder companies prove sustainable designs and gain greater efficiencies through integrated monitor designed for data center commissioning. Through integration of 3 key test tools for transient capture, power quality, and temperature and humidity data, solution streamlines data center generator and UPS equipment power quality monitoring and reporting. It also helps companies meet LEED certification using strategies aimed at achieving high performance.

Sangoma Technologies Corp.    Markham, ON L3R 9R6  Canada
Sep 05, 2012 Providing up to 84 T1 spans or 63 E1 spans, Model STM1-Mux offers capacity to connect 2,016 simultaneous calls. Unit supports direct cable connection with A116 high density digital telephony board, eliminating cross-connect wiring for each group of 16 E1/T1 spans terminated in high-density deployments. Combined with other Sangoma solutions supporting SS7 and SIP signaling and multiple transmissions standards, STM1-Mux can form complete platform to support many business applications.

Zenverge, Inc.    Cupertino, CA 95014
Sep 04, 2012 Networked quad stream HD transcoder IC, ZN2000, enables pay-TV operators and broadcast equipment manufacturers to deliver high-quality video experience anywhere, anytime, and to any IP-connected device. While capable of transcoding up to 4 HD or 16 SD video streams simultaneously, IC is also capable of transcoding 2 full HD streams to 8 ABR profile streams. Functionality provides optimal transcoding density and adaptive bitrate streaming control.

Micro Analog Systems Oy    Helsinki   Finland
Aug 31, 2012 Primarily intended for MEMS-based pressure sensor modules, 16-bit Model MAS6512 uses ratiometric AD-converter principle employing delta-sigma conversion technique. Resolution of ADC is 14-bits. IC includes internal temperature sensor, clock oscillator, and 256-bit EEPROM calibration memory. Available in 4 x 4 x 0.75 in. QFN-16 package as well as wafers or dies, unit operates from supply voltages of 1.8-3.6 V with current consumption of 1.9-28 µA.

GOEPEL electronics LLC    Austin, TX 78759
Aug 22, 2012 Offering VarioCore® technology for dynamic configuration of module-specific FPGA based functions, SCANFLEX® SFX5212 provides 12 channels with driver performance up to 150 mA, independently programmable as input, output, or tri-state. I/O voltage may be programmed onboard or externally supplied. While module acts statically in Boundary Scan mode, supporting interconnection test or cluster test procedures, functional mode supports protocol generator, data recorder, or counter/timer functions.

WinSystems, Inc.    Arlington, TX 76011
Aug 21, 2012 SUMIT-ISM(TM)-compatible PXM-UIO96-2 offers PCIe expansion on 90 x 96 mm, PC/104-sized module enabled by stackable, high-speed SUMIT(TM) connector. Card offers ability to monitor all 96 lines for both rising and falling digital edge transitions, latch them, and interrupt host processor to deliver change-of-input status notification. Each I/O line is programmable for input, output, or output with read-back operation, and transition polarity is programmable and enabled on bit-by-bit basis.

Data Device Corp. (DDC)    Bohemia, NY 11716-2482
Aug 17, 2012 Available in PCIe, PMC, PCI, cPCI, and PXI form factors, DD-40X00X Series includes up to 36 ARINC 429 programmable Tx/Rx channels for hardware in-the-loop testing and integration, 2 ARINC 717 programmable Tx/Rx channels for flight data recorder testing, and 16 avionics discrete I/O. Each card also offers parametric test functionality, variable output voltage, and onboard voltage monitoring. Variable ARINC speed output allows compatibility with ARINC specifications that run at different speeds.

Pepperl+Fuchs    Twinsburg, OH 44087
Aug 16, 2012 Featuring round housing design, G11 Series includes 2 modules that offer 2 analog outputs each: one for 0-20 mA operation with flat cable connectivity and one for 0-20 mA operation with M12 round connector. Third module offers 4 analog outputs of either 0-20 mA or 0-10 V for flat cable connectivity that can be powered by AS-Interface or auxiliary power source. Output type of each module can be selected by DIP switch or automatically determined based on connected load.

LCM Systems Ltd.    Isle of Wight PO30 5GY  United Kingdom
Aug 14, 2012 Supplied in IP65 sealed ABS case, Model T24-RM1 is available for T24 wireless telemetry system. Module offers 2 power relays, each of which can be assigned set point and triggered from either one T24 acquisition module or summed group of up to 8 units. Capable of mains power switching, dual 240 Vac/5 A relay modules have been designed as limit or window alarms for T24 acquisition units. Relays can be latched and digital input or external command can be used to reset them.

Trimble Navigation Limited    Sunnyvale, CA 94085-3913
Aug 14, 2012 Used for managing remote recycling containers, cBin(TM) provides ability to see container fill levels on daily basis as well as tools to build customized collection routes to pick-up full containers. Remote sensor in container wirelessly sends fill level and asset status information to Web portal, which can be accessed to manage container inventory and pickups. Automatically, sensors measure container fill levels hourly and send immediate updates if action levels are exceeded.

Analog Devices, Inc.    Norwood, MA 02062-9106
Aug 14, 2012 Along with 0.35 pC charge injection and 20 pA leakage, ADG5206 (16-channel) and ADG5207 (differential 8:1) feature trench isolation between N- and P-channel transistors of each CMOS switch that ensures latch-up protection for applications operating up to ±22 V. Additional properties include 3.5 pF off-source capacitance and 60 MHz, -3 dB bandwidth. Respectively, multiplexers operate from ±9 to ±22 V and +9 V to +40 V in applications where analog signal is bipolar and unipolar.

Wineman Technology, Inc.    Saginaw, MI 48604
Aug 13, 2012 Featuring 19 in. 3U rackmount design, RAPID offers real-time control and data acquisition for dynamometers and servo-hydraulics test cell applications. Unit provides 4 kHz, digital PID loop closure with spare analog and digital inputs for data-logging, and includes watch dog timer that produces 2 kHz square wave output. Controller allows up to third order polynomial scaling on first 8 analog inputs, and allows 4 frequency inputs to be configured to accept combination of frequency and encoder signals.

National Instruments Corp.    Austin, TX 78759-3504
Aug 13, 2012 Equipped with 1.33 GHz Intel Core i7 dual-core processor, 2 GB RAM, and 32 GB non-volatile memory, stand-alone NI cDAQ-913x runs data acquisition, online analysis, and logging software. Eight-slot chassis supports more than 50 C Series I/O modules, enabling user to mix and match variety of I/O and sensor types to create custom measurement and logging system. NI cDAQ-913x can stream data to disk at 30 MBps and simultaneously stream continuous measurements with sample rates up to 1 MS/s/ch.

Wineman Technology, Inc.    Saginaw, MI 48604
Aug 13, 2012 While DynEDGE serves such dynamometer applications as system modernizations, new installations, turnkey systems, and complete test cell control and DAQ systems, ServoEDGE brings same functionality to hydraulic and servo-hydraulic applications. Both are built on NI VeriStand software and INERTIA real-time control software, embedded on multi-core NI PXI real-time controller. NI PXI hardware, along with Wineman connector blocks and power module, facilitates connectivity and integration.

Measurement Specialties, Inc.    Hampton, VA 23666
Aug 10, 2012 Supplied in TSSOP, KMA36 system-on-chip combines magnetoresistive sensor array with ADC and signal processing. Contactless sensor uses Anisotropic Magneto Resistive (AMR) technology to measure magnetic field angle of external magnet over rotation of 360° as well as incremental positions along linear magnetic pole strip with 5 mm pole length. Configuration, data communication (I²C), and analog signal output are accessible via TSSOP pins. Self-diagnostics are also included.

Texas Instruments, Inc. (TI)    Dallas, TX 75243-4136
Aug 10, 2012 With AFE4300, engineers designing weigh scales that incorporate body composition measurement (BCM), body impedance analysis, and impedance measurement equipment can accelerate product market introduction by implementing existing, more complex multi-chip solutions. Analog front end incorporates 2 separate signal chains - one targeting weight measurement and another targeting body composition analysis - with 16-bit, 860 sps ADC multiplexed between them.

Green Turtle    Charlotte, NC 28217
Aug 10, 2012 Operating remotely, Smartpro® Wireless RF System provides accurate real-time data via push of button, giving facilities managers insight into grease, solids, and sludge levels in grease interceptors and oil separators. RF probe, mounted inside interceptor, communicates with control panel in office at distances up to 300 ft without wires. With ever-present data, regulators can manage system without lifting heavy access covers or using messy measuring devices.

Dataforth Corp.    Tucson, AZ 85706
Aug 09, 2012 Featuring 10 modules with input ranges from -1 to +1 V through -5 to +5 V, Series 8B43 isolates, filters, and amplifies voltage input signal, then provides analog voltage output. Modules interface to DC LVDTs which operate on 10 V excitation voltage and up to 20 mA of excitation current. Housed in miniature 1.11 x 1.65 x 0.4 in. package, signal conditioners provide ±0.05% accuracy, ±0.02% linearity, 1,500 Vrms transformer isolation, and continuous input protection to 240 Vac.

Wildlife Acoustics, Inc.    Concord, MA 01742
Aug 07, 2012 Connecting SM2+ and SM2BAT+ acoustic and ultrasonic recorders to web portal, Song Stream allows access to status information such as card consumption, battery supply voltage, and log of recent recording activity via cellular or satellite networks. Email alerts may be configured to immediately notify user of status update of Song Meter deployment. Depending on sample rate, recording mode, and chosen transmission network, it is possible to download portion or all recorded data remotely.

Phoenix Contact    Harrisburg, PA 17111 0100
Aug 06, 2012 Enabling distribution of safe I/O modules in network without safety controller, SafetyBridge can integrate into PROFIBUS, PROFINET, INTERBUS, and EtherNet/IP protocols over Phoenix Contact, Siemens Step 7, and Allen-Bradley RSLogix 5000 control suites. Technology lets I/O modules exchange safety-related signals with one another; standard control system and network are only used as transport medium. Safety modules can be distributed throughout automation system using Inline Modular I/O.