United Electronic Industries    Canton, MA 02021
Mar 28, 2008 Compatible with Cube and RACKtangle I/O chassis, Guardian Series(TM) DNA-DIO-448 and DNR-DIO-448 read all 48 bits at sustained rates in excess of 1 kS/sec. Input switching levels are software selectable from 0-28 Vdc with 25 mV resolution. Diagnostic input mode measures analog voltage at each input, allowing detection of short and open circuits as well as identifying marginal or failing drive circuitry. Analog input capability also offers installation, diagnostic, and data acquisition tool.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Mar 28, 2008 Hand held Checkmate(TM) DL allows user to read corrosion data from data logger or remote data collector and transfer it directly to computer. Transmitter and data logger are explosionproof and intrinsically safe. Suited for Class I, Zone 1 or Class I, Zone 2, hazardous areas, system is able to capture and store readings of up to 50 different corrosion data loggers or 57,330 MICROCOR® Data Logger readings. It requires 6 AA batteries and operates from -18 to +50°C.

NuWaves Engineering    Middletown, OH 45044
Mar 28, 2008 Operating at 6 Vdc, Model RF2-3000UCV1 multi-octave upconverter features IF input ranging from 2-70 MHz to provide RF upconversion between 2 MHz and 3 GHz with gain flatness under 2 dB for specified spectrum. It has 50 dB of attenuation control with incremental steps of 0.5 dB and 5 kHz frequency step size. Packaged in ruggedized aluminum enclosure measuring 1.0 x 2.5 x 3.5 in., unit can be used in variety of applications, and also on bench as stand alone RF signal generator.

Shipcom Wireless Inc.    Houston, TX 77082
Mar 26, 2008 Combining mobility, business process management, and workflow simplification, CATAMARAN solutions extend Oracle ERP applications to global Oil and Gas industry edge environments such as offshore rigs, refineries, pipelines. Solutions enable end-to-end real-time information by bridging back-office business applications that rely on operational data from field to real-world processes that collect, filter, analyze, and integrate data to ERP systems.

Sky-Trax, Inc.    New Castle, DE 19720
Mar 26, 2008 Designed as computing and connectivity module, Sky-Box(TM) provides power to all aftermarket additions to forklifts, AGVs, or other industrial vehicles. It also has ability to receive transactional and/or location data from onboard sensors or transaction tools. Internal computer gathers sensor data several times/sec, revealing vehicle location, load ID recorded, and transaction data collected during pick-up or put-away. Sky-Box communicates data to host-system or WMS via wireless connection.

SIXNET    Clifton Park, NY 12065 0767
Mar 26, 2008 With web-based I/O configuration and monitoring, self-calibrating analog I/O, and OEM customizable components/labeling, EtherTRAK-2 features RS483 and USB Ethernet ports with MAC and IP addresses, allowing 2 module connections to independent networks. ISO9001, CUL, UL DNV, CE, FCC, and RoHS rated module has operating temperature range of -40 to 75°C. Compact enclosure snap-locks into wiring base, and hot-swap capability minimizes downtime.

Brocade Communications Systems, Inc    San Jose,, CA 95110
Mar 25, 2008 Designed to help deliver on Brocade Data Center Fabric (DCF) architecture, Brocade DCX(TM) Backbone promotes consolidation along with lower deployment and operational risk. Data storage solution provides consolidation platform for HP/Brocade customers that want to implement server virtualization as well as increase performance and scalability. Interoperable with existing architectures, product supports developing and established protocols.

Dataq Instruments    Akron, OH 44333
Mar 25, 2008 DI-785 Ethernet DAQ models have 2 built-in 16-channel 5B module backplanes where up to 32 5B-type signal conditioning modules can be installed, while DI-788 units have 2 x 8B module backplanes that support up to 32 8B-type modules. Both offer 14-bit resolution, programmable gains/channel of 1, 2, 4, and 8, and maximum sample throughput rate up to 180,000 S/sec. Multiple units can synchronize at sample rates up to 180 kHz/unit by daisy-chaining CAT-5 cables between them.

Sprint Electric Ltd    Arundel East Susse BN18 0BE  United Kingdom
Mar 21, 2008 Used by system integrators, Programmable Logic Arithmetic unit (PLA) offers functionalities for diverse applications and motion tasks. Stand-alone unit can compliment and enhance any analog or digital drives system. Via range of configurable I/O to internal application blocks, PLA enables user to define control strategy to meet unique demands of process or application at hand. Connectivity is fostered by RS232 port and field bus communication card compatibility.

Dwyer Instruments, Inc.    Michigan City, IN 46361 0373
Mar 19, 2008 Model MN-1 Mini-Node Communication Signal Converter transforms half duplex RS-485 serial communications signals into those that can be read by any computer with USB port. While integral USB connector and RJ-45 connector minimize set up time by eliminating extra wiring, USB-powered design also eliminates need for external power source. Solution consumes 0.4 W of power and supports baud rates from 75-115,200 bps.

SICK STEGMANN, INC.    Dayton, OH 45413
Mar 19, 2008 Suited for use in dirty or dusty environments with water washdown cleansing, VFS 60 Motor Feedback Systems come with single point of potential access. Hollow shaft encoders feature nickel code disc that facilitates operation in harsh industrial environments and tolerance to temperatures as high as 100ºC. They are IP65 rated and deliver from 1-10,000 ppr in industry-standard 60 mm housing. Ball bearings that support encoder shaft are spaced 30 mm apart to ensure concentricity.

Micronor    Newbury Park, CA 91320
Mar 18, 2008 Ruggedized with greater than 500 g shock and 30 g vibration resistance, ENA361M (hollow shaft) and ESA361M (solid shaft) series single-turn absolute encoders provide 12-bit resolution and can be used in outdoor applications over -40 to +85°C range. Products are offered with choice of 4-20 mA or 0-10 V output and measuring range options of 45, 90, 180, or 360 deg. Protected against humidity and condensation, IP67-sealed units (IP69K optional) operate from 18-30 Vdc input.

Pentek Inc.    Upper Saddle River, NJ 07458
Mar 18, 2008 Model 7150 comes with four 200 MHz, 16-bit A/Ds, multi-module synchronization capability, variety of IP cores, built-in data capture modes, and pair of Xilinx Virtex-5 FPGAs, including processing and interface FPGAs. PMC/XMC module connects directly to RF/IF inputs of communications system. With flexible form factor, unit features front-panel synchronization bus, sampling clock, and 3 banks of 1.5 GB DDR2 synchronous DRAM connected to main processing FPGA.

VersaLogic Corp.    Eugene, OR 97402
Mar 14, 2008 With 16-channels of 12-bit analog output and 24 digital I/O lines, VCM-DAS-3 PC/104 helps add I/O functionality in single board embedded computing applications. RoHS-compliant unit operates over -40 to +85°C extended temperature range. It features software programmable output ranges, software calibration, ability to reset to zero scale on power-up, read back of DAC and SPAN codes, and latching 2 mm headers. Supporting both unipolar and bipolar operations, unit comes with legacy features.

Automation Systems Interconnect Inc.    Mechanicsburg, PA 17055
Mar 13, 2008 Measuring 6 mm wide, DIN rail mounted Signal Conditioners are available in programmable multi-function units or single input/single output models. Series includes analog converters and isolators, RTD and thermocouple converters, analog-to-frequency signal converters, and threshold modules. Programmable via dip switches, conditioners are available for use with 24 Vdc supply. Accuracy is .1%, making devices suited for demanding process control applications.

Adaptec, Inc.    Milpitas, CA 95035
Mar 11, 2008 Availalbe in 7 models, RAID Series 5 Unified Serial Controllers allow up to 256 SATA or SAS drives to be connected to single system, providing up to 200 TB of storage capacity. PCIe interface controllers are based on Intel® IOP348 I/O processor to deliver core speed of 1.2 GHz. Supported by Adaptec Storage Manager(TM), units allow for local and remote browser or application-based management from single console, and suit web hosting, video surveillance, medical imaging, and communications.

Linear Technology Corp.    Milpitas, CA 95035
Mar 07, 2008 Model LTC2309 allows I2C data transfers up to 100 kHz in standard mode and 400 kHz in fast mode. Unit includes 2-wire interface with 14 ksps throughput rate and 2 address select pins that may be tied low, high, or left floating, providing 9 I2C addresses. Converter features 8-channel integrated multiplexer and operates from single 5 V supply, as well as 35 µW in shutdown mode. Packaged in 4 x 4 mm QFN-24, converter is available in commercial and industrial temperature grades.

Quantum Devices, Inc.    Barneveld, WI 53507
Mar 07, 2008 At less than 1 in. high, model SC12 provides feedback solution for applications typically using modular encoders. Short-circuit-proof and reverse polarity-tolerant outputs consist of quadrature sine/cosine pair with index pulse and 3-phase commutation. Each unit is individually calibrated to compensate for normal construction variances, and output levels are stabilized due to source tracking of sensor supply. Solution also provides 30° of rotation for commutation timing.

ACCES I/O Products, Inc.    San Diego, CA 92121 1506
Mar 05, 2008 Comprised of 16- and 12-bit modules with 16 single-ended or 8 differential inputs, USB-AI Series includes 5 models covering 8 standard analog voltage input ranges and 2 factory current input ranges (4-20 mA or 10-50 mA). Data sampling speeds reach 500 kHz, and all functions are fully software configurable. Along with data sample buffer, hardware real-time calibration, and 16-bit counter/timer, features include channel-by-channel programmable gain and 3 trigger modes.

Futek    Irvine, CA 92618
Mar 04, 2008 Suited for any full-bridge strain-gauge-type sensor, CSG110 Inline Signal Conditioner/Amplifier offers mV/V range output to provide VDC and/or 4-20 mA signal with built-in regulated bridge excitation source. It features plastic housing with mating DB9 female connector for power output side and DB9 male connector for sensor side, offering power supply range of 12-24 Vdc. DIN-rail-mountable, unit accepts inputs from transducer and converts them to standard current signal.