Test & Measuring Instruments ->
Instrumentation I & O Devices|
Instrumentation I & O Devices
(Showing headlines 1201 - 1220) << 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 ...
DAQ Boards fit x1 PCIe slots on motherboards and backplanes.
Branford, CT 06405 2932
Dec 03, 2008
Providing duplex throughput of 500 MB/sec, A/D PCEDAQ analog-input boards offer 16 or 64 channels, with 12- or 16-bit resolution at speeds to 3 MS/sec, and various features that simplify data collection. Model PCEAO analog-output boards can simultaneously update 4 x 12-bit output channels at sustained rate of 1 MS/sec. Also, they allow bus-mastering data transfers for D/A and A/D. Both boards are designed for x1 PCIe slots on motherboards and backplanes.
Strain Gage Signal Conditioner has 0-30 mV input range.
Calex Mfg. Co., Inc.
Concord, CA 94520
Dec 03, 2008
DIN Rail mount, self-contained DC powered module, Model 4710 is designed for load cell, strain gage, or single ended analog amplification and filtering. It contains built-in 10 V excitation supply capable of driving 350 W bridge, and provides 0-10 Vdc filtered output with frequency response of DC to 10 Hz. Measuring 3.78 x 1.06 x 1.65 in., unit features screw clamp terminal blocks, and externally located Zero and Span adjustment potentiometers.
Signal Conditioners deliver up to 4 I/O channels.
Moore Industries International, Inc.
North Hills, CA 91343
Dec 03, 2008
With 1 in. footprint, miniMOORE family multi-channel analog signal conditioners provide 1,000 Vrms input-to-output and channel-to-channel signal isolation. DIP-switch on 2-channel versions selects analog input types of 4-20 mA, or 0-5, 1-5, or 0-10 V, while 4-channel model accepts 4-20 mA inputs. All models provide isolated 4-20 mA outputs, ready for interface with indicator, recorder, DCS, PLC, or PC-based SCADA system, and feature industrial metal housings for RFI/EMI protection.
Time-to-Digital Converter offers 5 picosec timing resolution.
Agilent Technologies, Inc.
Santa Clara, CA 95051
Dec 03, 2008
Model U1050A-002 of U1050A line of Acqiris time-to-digital converters has measurement range of up to 20 sec and ratio of 1:4.109. Module can operate in either single-start or multi-start acquisition modes with timing information on all 13 independent channels encoded relative to common channel. Time measurement on unit can be based on either internal low jitter of less than 3 ps rms, high stability of ±2 ppm clock source, or external 10 MHz reference input.
JTAG/Boundary Scanner supports Bluetooth® interface test.
GOEPEL electronics LLC
Austin, TX 78759
Dec 02, 2008
SCANFLEX® I/O module SFX-9305 supports use of 9305-BAC/Bluetooth Bus Access Cable (BAC), which enables test of Bluetooth® interfaces in addition to nominal JTAG/Boundary Scan operations. BAC interface is recognized and configured automatically, while BAC type/number to be used are defined by user. Interface functions contain stepwise handling of protocol layers, including bi-directional data transfer. This lets users completely control interface target and clearly identify faults.
Analog Signal Converter offers less than 5 ms response time.
Axiomatic Technologies Corp.
Mississauga, ON L4Z1Z8 Canada
Dec 02, 2008
Featuring 16-32 Vdc input range and 0-10 Vdc to ±200 mA output, Model IC-DR-23 converts any analog or PWM signal to suit application. DIN rail-mounted unit includes short circuit protection and reverse polarity protection, as well as diagnostic LEDs to indicate operational status. Operating from -40 to 85°C, converter consumes 20 mA at 24 Vdc, no load. With IP40-rated housing and IP20-rated terminals, device is suited for industrial automation and machine controls.
High Voltage Down Converter allows 5-10 kV transmission.
Diversified Technologies, Inc.
Bedford, MA 01730
Dec 02, 2008
Featuring direct solid-state switching, PowerMod(TM) provides down conversion of 10-20 kW, with conversion to 100-600 V at point-of-load undersea. It maintains 90% efficiency, with constant transmission over length of cable up to 100 km and up to hundreds of kilometers using multiple nodes. Applications include remote undersea powering of motors, data repeaters, instruments for oil exploration, environmental studies, and submersibles.
Embedded Controller has Intel Core 2 Duo processor T7400.
National Instruments Corp.
Austin, TX 78759-3504
Dec 01, 2008
Featuring high-performance peripheral I/O, 2.16 GHz two-slot VXI Embedded Controller VXIpc-882 enables engineers to create hybrid systems by connecting external instruments to VXI system through GPIB, Ethernet, USB or serial ports or ExpressCard/34 slot. Users can add second VXI chassis to their systems with NI VXI-MXI-Express remote controller connected to unit via ExpressCard/34 slot. Controller can also be paired with 32 GB solid-state hard drive and LabVIEW v8.6 software.
Relay Scanner/Multiplexer is mobile and USB-powered.
Seattle, WA 98115
Nov 28, 2008
Measuring 5 x 7 x 1.3 in., SMU4032 USB Switching Module lets users maintain 7½ digit measurement accuracy across switching architecture. Instrumentation specifications enable 6½ or 7½ digit DMM to deliver its full accuracy, and 35 differential inputs offer configuration flexibility. Along with thermal EMF errors of less than 1 µV, features include isolated power and relay drive, guarded/shielded construction, on-board MCU, and built-in self-test functions.
Communications Module may also be used as motion module.
Advantech Automation Corp.
Cincinnati, OH 45240
Nov 26, 2008
Offered as 2-ring AMONet module, ADAM-5202 provides up to 128 communication slaves and supports distance communication of up to 100 m. Transmission speed can support 2.5, 5, 10, or 20 Mbps with automatic data flow control and accepts half-duplex RS-485 serial interfaces with transformer isolation. Capable of operating in temperatures from -32 to +140°F, module comes with LED indicators (active and error) for each port as well as 10 kV surge protection.
Position Sensor features on-chip digital encoder.
New Scale Technologies
Victor, NY 14534
Nov 24, 2008
Offering alternative to miniature optical encoders, TRK-1T02 TRACKER Magnetic Sensor offers 2 µm resolution and can be used as linear encoder or off-axis rotary encoder. Measuring 8.5 x 11.5 x 1.61 mm, unit does not require light source and is insensitive to external light, shock, vibration, and high-particulate environments. On-chip encoder provides direct digital output using standard I2C protocol, eliminating need for external pulse counters.
Modbus Modules control analog output using serial port.
Manchester, NH 03108
Nov 24, 2008
Designed for industrial motion control, D3000M series of digital-to-analog devices communicate using Modbus RTU over RS-232C or RS-485 link. Input-to-Output isolation is 500 Vrms and units offer measurement resolution of 12 bits. They include 8-bit CMOS microcomputer that performs scaling and calibration tasks in software. Packaged in 3.60 x 2.45 x 0.85 in. ABS case, products are available in 16 models with 0-70°C rated performance, but operate from -25 to +85°C.
PC/104 Boards feature 4, 6, or 8-channels of encoder inputs.
ACCES I/O Products, Inc.
San Diego, CA 92121 1506
Nov 21, 2008
Available with 3 differential channels per encoder, including dual axis and index, 104-QUAD-8 Series of PC/104 boards suit applications in embedded motion control and instrumentation. Features included are resettable fused +5 Vdc available per channel, input ranges between ±25 V and ±7 V common mode, clock rate of 4.3 MHz with digital filtering, and 24-bit dual axis quadrature counter LS7266R1. Boards are programmable for counting, speed, and direction.
I/O Module allows multichannel, chip-level analysis.
Audio Precision, Inc.
Beaverton, OR 97075
Nov 20, 2008
Designed for APx audio analyzers, APx Digital Serial I/O option allows engineers to test audio devices at IC level rather than being limited to evaluating only external inputs and outputs of device. Module also allows all normal audio measurements to be carried out on A/D and D/A converters, codecs, DSPs, and sample rate converters. Unit supports variety of serial interface formats, and can generate and measure up to 8 audio channels simultaneously using TDM or multiple data lines.
Wireless Services RF Scanner covers range of technologies.
Comarco Wireless Technologies, Inc.
Lake Forest, CA 92630-8870
Nov 19, 2008
Fully programmable, scanning receiver solution supports simultaneous measurements of multiple technologies in Advanced Wireless Services (AWS) bands from 2,110-2,170 MHz as well as 850 and 1,900 MHz bands. It supports simultaneous scanning of multiple technologies and includes algorithmic features that enhance W-CDMA and CPICH scan rates in all bands. Respectively, scan rates for 16 CPICH, GSM, CDMA, and RSSI are 10 ms, 728 channels/sec, 33.3 ms/512 PNs, and 300 channels/sec.
Host Controller supports SATA, IDE, and PCI interfaces.
Fremont, CA 94538
Nov 17, 2008
Supplied in 128-pin LQFP package, AHCI-compliant EXstor(TM) XRS10L620 can work with all SATA port multipliers targeting range of data storage environments. It connects up to 4 systems simultaneously - 2 SATA devices and 2 IDE/ATAPI devices - and achieves peak performance when driving SATA HDDs supporting NCQ. IDE channel supports 133 MB/s max transfer rate, while PCI-X-compliant 32-bit bus interface complies with 33, 66, and 100 MHz clocking rates.
Servers feature digital I/O extension.
Perle Systems Inc.
Nashville, TN 37210
Nov 17, 2008
IOLAN Ethernet I/O device servers with I/O tunnelling can transmit digital input signals to remote output over IP/Ethernet network. Ethernet I/O technology (IOLAN DS I/O device servers) enables comprehensive access and control of remote digital I/O, analog I/O, pulse I/O, relays and temperature sensors, as well as connections of remote serial equipment on any IP network.
Magnetic Rotary Encoder resists shock, vibration, and cold.
Advanced Micro Controls, Inc.
Terryville, CT 06786
Nov 14, 2008
Available in SSI and analog output versions, ME15 series size 15 rotary shaft encoder has dia less than 1.5 in. and is designed for heavy-duty operation. IP67 rating protects against dust and moisture and sturdy machined housing is resistant to shock and vibration. Operating over -40 to +85°C range, encoders utilize diametrically polarized magnet and custom ASIC that contains array of Hall sensors. Series is capable of operating in areas with high external magnetic fields.
Signal Path Solution suits DAQ systems, STBs, and radar.
National Semiconductor Corp.
Santa Clara, CA 95051-0695
Nov 14, 2008
At 248 MHz, ADC10D1000 provides spurious-free dynamic range(SFDR) performance of 66 dBc and 9.1 effective number of bits. This 2 GSPS single/1 GSPS dual ADC runs off single supply voltage and consumes 2.8 W. At 2.5 GHz, LMH6554 wideband fully differential amplifier drives 10-bit ADC10D1000 and provides 0.1 dB gain flatness up to 800 MHz, SFDR of 72 dBc at 250 MHz, and input voltage noise performance of 0.9 nV/sqrt Hz.
Managed Ethernet I/O Module provides 16-bit resolution.
Taipei 231 Taiwan
Nov 13, 2008
Along with 14 channels of digital input and 8 channels of digital output, JetI/O 6550 supports event counter for DI mode and pulse output for DO mode. Modbus/TCP protocol and OPC Server driver are provided for integrating with existing HMI/SCADA, and flexible IF-Then rules help users define intelligent logic rule for remote I/O control. Supplied in DIN rail-mounted, IP31-rated aluminum case, block I/O module is suited for status monitoring and control applications.
(Showing headlines 1201 - 1220) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160