Curtis Instruments, Inc.    Mount Kisco, NY 10549
Jan 07, 2009 Offering 9 multi-purpose I/O pins in IP65-sealed enclosure, Model 1352 eXM Hydraulic I/O Expansion Module provides 3 analog inputs and allows configurable control of 6 proportional hydraulic valves. All I/O pins can also be used as basic digital I/O. Utilizing CANbus interface, module allows connection to any centralized or distributed vehicle control system that uses CANopen protocol. Additional features include short circuit protection, watchdog circuits, and LEDs for fault identification.

Mercury Computer Systems, Inc.    Chelmsford, MA 01824
Jan 07, 2009 Echotek® Series DCM-V5-XMC incorporates A/D and D/A technology for high-speed and high-resolution data conversion while preserving quality of original signal. It implements Virtex(TM)-5 SX95T or LX155T FPGA, which can be programmed by end-user for specific application requirements. Each FPGA is accompanied by DDR-II-SDRAM and QDR-II-SRAM memory chips, available for buffering input data streams and supporting computationally intense applications.

Sena Technologies, Inc.    Seoul 137-130  Korea (south)
Jan 07, 2009 Model LTC100 lets users take advantage of RS422/RS485 on systems only equipped with RS232, without changing hardware/software or installing software drivers. Selected via slide switch, RS422 and RS485 modes respectively support up to 10 and 32 devices connected together. Converter, fully compatible with PC serial COM port, supports 1.2 km max communication distance and 921.6 Kbps max serial speed. It operates without external power supply and also supports RTS auto toggling.

SWP, Inc.    Ontario   Canada
Jan 07, 2009 Available in 5 x 5 x 1.0 mm body, 32-pad, lead pitch 0.50 mm Micro Lead Frame package, CMOS ICs of Universal Frequency-to-Digital Converters UFDC-1 and UFDC-1M-16 can work with any sensors from frequency-time signal domain group and convert frequency, period, duty-cycle, duty-off factor, and rotation speed to digital. Model UFDC-1 and UFDC-1M-16 have programmable accuracy from 1 to 0.001% upto frequency range of 7.5 MHz, and scalable resolution from to 2.5 x 10-7 Hz to 45 Hz.

Azima DLI    Woburn, MA 01801
Jan 06, 2009 Enabling timely corrective maintenance, DCX(TM) empowers vibration analysts to record, collect, and analyze vibration information directly from DRS Tactical Systems' military-grade Tablet PC. This 4-channel diagnostic data collector and real-time analyzer, capable of wireless networking, comes with software suite for remotely recording and analyzing vibration data. Also, automated data analysis tools can compare recordings to historical information and relay findings in plain language.

Red Lion Controls    York, PA 17406 9428
Jan 05, 2009 Featuring detachable LCD display/programming module, DIN rail mounted IAMS Series provides complete isolation and conversion capability to satisfy most applications. Universal input can accept RTD, TC, Ohm, potentiometer, mA, Vdc, and process input signals. With universal power supply that accepts 21.6-253 Vac or 19.2-300 Vdc, signal conditioners offer over 100 possible input-to-output combinations and are available in setpoint, analog, and analog output and relay control models.

Ethernet Direct    Newburyport, MA 01950
Jan 05, 2009 Featuring MPEG-4/Motion-JPEG format video compression, 4-channel Model OVS-400 of OWL series converts analog video signals into IP video streams. Product supports 12 Vdc power input, video output in all type of resolutions including full D1/CIF/QCIF, two-way audio, 2 sets of alarm input/output via terminal block connection, and offers manually bit rate control from 28 Kbps up to 3 Mbps. Built-in hardware motion detection allows to setup 3 detection areas.

Linear Technology Corp.    Milpitas, CA 95035
Jan 05, 2009 Operating from 1.8 V analog supply, LTC2261 14-bit 125 Msps ADC offers SNR performance of 73.4 dB and SFDR of 85 dB at baseband. Low jitter of 0.17 psRMS allows undersampling of IF frequencies with noise performance, while digital outputs can be set to full rate CMOS, double data rate CMOS, or double data rate LVDS. Offered in 6 x 6 mm QFN package, unit randomizes digital output before it is transmitted, and can reduce residual tones caused by digital feedback by 10-15dB.

WAGO Corp.    Germantown, WI 53022
Jan 02, 2009 Based on 10816-3 mechanical vibration standard, 750-645 2-Channel Vibration and Roller Bearing Monitoring Module analyzes vibration severity and shock pulse feedback utilizing 750-925 Tandem-Piezo® acceleration sensor. Mechanical shock pulse process data is transmitted via fieldbus to control systems and resulting analysis helps determine machine maintenance needs. Programmable system allows configuration of good, warning, and fault limits via WAGO-I/O-CHECK software.

HBM, Inc.    Marlborough, MA 01752 3014
Dec 26, 2008 Enabling connection to fieldbus interfaces such as CANopen and ProfibusDP, TIM 40 Module makes T40 torque flange suitable for wide range of applications. Module integrates into Ethernet networks, allowing outputs of about 40,000 values/sec. In addition to data output, TIM 40 offers scaling and filtering of measured values and zeroing of torque signal. Mounted on DIN rails, module also upgrades T40 torque flange with additional analog and digital interfaces.

Saelig Co., Inc.    Pittsford, NY 14534
Dec 26, 2008 Compatible with USB 1.1/2.0 HID, PoKeys55T(TM) provides 55 digital I/O lines which are 5 V tolerant, 5 x 10 bit analog inputs, and 10 bit analog output. It emulates keyboard or joystick without needing drivers to be loaded, and can be used for industrial or CNC control, as custom joystick or keyboard, or as data acquisition board. With encoder support on any of it's inputs, product can be connected with 25 incremental encoders, and up to 255 board devices can be connected to one PC.

Saelig Co., Inc.    Pittsford, NY 14534
Dec 26, 2008 Designed for mobile and embedded solutions, PL-2303HX high-performance USB-to-Serial Bridge Controller is available in 5 mm square footprint that can fit inside connectors or handheld devices. It can connect directly to 3.3-1.8 V devices and while its flexible baud rate generator can be programmed to generate any rate between 75 bps to 12 Mbps. Fully USB 2.0 compliant product supports full handshaking for RS232 and RS422/RS485 2-wire interfaces.

NEC Electronics    Santa Clara, CA 95050
Dec 26, 2008 Designed for tuners that enable viewing of digital terrestrial broadcasts on analog televisions, EMMA(TM)2TS system-on-chip incorporates Full SegNote OFDM channel decoder compliant with Japanese Integrated Services Digital Broadcasting-Terrestrial (ISDB-T)standard. It also includes MPEG2 decoder, image display, video/audio D/A converter, and smartcard interface. SOC suppresses power consumption to approximately 1 W.

STMicroelectronics    Lexington, MA 02421
Dec 24, 2008 Occupying 0.89 x 1.26 mm footprint on PCB, EMIF02-SPK02F2 provides noise filtering for handset's built-in speaker or stereo headset output. One EMIF02-SPK02F2 can also be connected to microphone input to isolate handset from external noise sources. Product has double-clamping structure, able to clamp ESD spike to 12 V, and is suited for use in cellular handsets with MP3 capability as well as notebook/desktop PCs, car audio systems, and MP3 players.

Strategic Test Corporation    Woburn, MA 01801-1915
Dec 19, 2008 Respectively featuring 4 and 2 analog input channels, UF2e-4032 and UF2e-4031 are 50 MS/sec, 14-bit digitizer cards for PCIe that come standard with 256 MB signal memory. They also provide options for dual-timebase sampling, synchronous digital inputs, asynchronous digital I/O, and synchronization for hundreds of channels. Capable of continuous streaming to host PC at over 120 MS/sec, cards enable each channel to be individually configured for signal source.

Validyne Engineering Corp.    Northridge, CA 91324-4438
Dec 19, 2008 USB2250 PCI Sensor Interface enables real-world data acquisition on PC via USB port. Interface features 16-bit resolution, 100 kHz conversion rate, 16 input channels, sensor excitation, auto-zero capability, and accepts any combination of single-ended or differential input types. Unit allows user to set sensor type, gain range, channel, and all other input parameters, which can be saved to non-volatile memory. DAQ software is also included.

GE Intelligent Platforms    Charlottesville, VA 22911
Dec 15, 2008 Providing interface between Profibus-DP master and up to thirty-two Series 8000 Process I/O modules, Profibus-DP Bus Interface Module is designed to Profibus DPv1 standard, which supports both cyclic and acyclic communications. Device supports pass through of HART variable and status data with 8-channel HART AI or AO modules. Communications to instrument management software, including AMS- and FDT-based packages, is over Ethernet.

Renishaw, Inc.    Hoffman Estates, IL 60192
Dec 12, 2008 Available in linear and rotary versions, TONiC works at speeds to 10 m/s and temperatures up to 70°C while providing resolution to 5 nm. High signal-to-noise ratio combined with dynamic signal processing ensure sub-divisional-error of less than ±30 nm. In addition to reading linear and rotary scales, TONiC reads gold scale featuring auto-phase IN-TRAC(TM) optical reference mark, which provides bi-directionally repeatable index over entire speed and temperature range.

Rockwell Automation    Milwaukee, WI 53204
Dec 10, 2008 Designed for original equipment manufacturers (OEMs), MicroLogix 1400 controller can support up to 7 additional I/O modules for maximum of 144 discrete I/O points. It features online editing, EtherNet/IP and embedded LCD, as well as 6 embedded 100 kHz counters and removable terminal blocks. Controller supports up to 10,000 program words and 10,000 words for data, memory module for program backup and transport, and data log or recipe-storing.

Avalue Technology Inc.    Chung Ho City, Taipei   Taiwan
Dec 09, 2008 Powered by Intel® dual-core GM45 technology, Model ACP-GM45 supports FSB up to 1,066 MHz and 2 sets of 4 GB DDR2/DDR3 memory controllers. Security chipset helps defend against software-based attacks, while EEPROM 64 KB read-only encoding function and hardware random number generator protects data from being false or stolen. Board provides JAMMA interface, dual independent display support, 2 sets of RTCs, and 32-bit digital I/O interface.