Mahr Federal Inc.
Providence, RI 02905
Dec 24, 2007 With measuring range of 0.5 in. and resolution to 0.00005 in., MarCator 1081 provides IP51 class protection against dust and falling water according to IEC 529. USB connectivity allows multiple indicators to be linked to PCs through USB hub without multiplexer. It features operating temperature range of 10-40°C, measuring speed of 60 ips, and button lock function that prevents unintentional activation of one or more operating buttons.

Safety Flag Co. of America
Pawtucket, RI 02862-1088
Dec 13, 2007 At more than 12 ft long, 146 in. windsocks (WS36) are double-stitch sewn in reinforced vinyl coated fluorescent fabric for optimal visibility. Products are suited for use in open areas where wind can be strong and capricious. They are available with heavy-duty hardware for new installations and have 36 in. throats that enable them to serve as replacements for worn or faded windsocks.

LGInternational
Portland, OR 97224
Nov 27, 2007 Designed for steam autoclaves, gamma radiation, and EtO gas sterilization, Sterilization Indicating Labels use specialty inks that change color when exposed to specific sterilization procedures. Labels withstand moisture, chemical exposure, and extreme temperatures without smearing, cracking, or fading while maintaining adhesion throughout sterilization process. They can be customized for pre and post sterilization as well as sample track and trace.

Mahr Federal Inc.
Providence, RI 02905
Nov 15, 2007 Providing at-a-glance tolerance monitoring, MarCator 1088 features large LCD display that appears green or red to reflect in- or out-of-tolerance conditions. Unit includes USB connectivity and allows multiple indicators to be linked to PCs through USB hub without mutliplexer. Offered in measuring ranges of 0.4, 1, and 2 in., indicator includes MAX-MIN memory function for checking concentricity or flatness, as well as searching for reversal points when measuring bores.

AMETEK Solartron Metrology
Gastonia, NC 19301
Nov 01, 2007 Designed to work with gauging transducers operating on Solartron's Orbit® Network, SI 3500 features menu-driven display that can be programmed to set limits and record other parameters. Powered by 24 Vdc, plug-and-play instrument can display single or multiple transducer readings or computed results, such as A, B, A+B, (A+B)/2, or (A-B)/2, as well as computations with constants. Device features discrete I/O and selection of analog outputs in form of 4-20 mA or dc voltage.

Rieker Instrument Co., Inc.
Folcroft, PA 19032
Sep 07, 2007 H4 Series inclinometers provide single axis inclination sensing in environmentally protected zinc metal housing. Available with 0-5 V analog or digital serial (RS232) outputs, it includes liquid capacitive sensing element for vibration damping with integrated temperature compensation. Angle ranges are ±30º, ±45º, and ±70º. Serial output transmits angle, in decimal format, in continuous stream of readings, 250 msec per reading, 9,600 baud, 8 data bits, no parity, 1 stop bit.

CLARE INSTRUMENTS US INC
Tampa, FL 33634
Aug 16, 2007 Featuring portable design with built-in rechargeable batteries, Cropico 3000 has inputs for Pt25 and Pt100 platinum resistance thermometers, while 3001 offers same flexibility, but without Pt25 input option, and 3002 is suited for use with Pt100 platinum resistance thermometers only. Units can eliminate thermal EMF and self-heating errors. They include internal data memory that can store up to 4,000 readings for display or direct transmission to PC or printer.

Industrial Scientific Corp.
Oakdale, PA 15071 1500
Jul 30, 2007 Model BM25 Multiguard multi-gas area monitor detects 1-5 gases simultaneously through diffusion/sample draw. When BM25 detects hazardous level of toxic or combustible gas, top-mounted beacon sends flashing signal in all directions while emitting 103 dB siren alarm. It can be used as stand-alone monitor or wired so that alarm signals transfer from one unit to another. Featuring 17 interchangeable smart sensor options, adaptable unit comes with NiMH battery offering 100 hr of run time.

Cooper Bussmann
Ellisville, MO 63021
Jun 22, 2007 InVision(TM) System uses Intelligent Fuse Monitors, Intelligent Circuit Monitors, wireless mesh router, and software to identify and relay open-circuit events caused by short circuits and overloads. When circuit opens, maintenance staff is notified by phone, e-mail, or fax detailing circuit location, correct replacement fuse to bring, and appropriate level of personal protective equipment. System offers 99.999% event transmission reliability.

HD Electric Co.
Waukegan, IL 60085
May 30, 2007 Featuring 2.5 in. tall LED display that can be read on end of long hotstick, DVI-100T reads voltage on conductor up to 99 kV line-to-ground. Direct contact, compact instrument is used on overhead lines or in underground applications by contacting conductor and reading display. It can also measure Elbow Test Points when in Capacitive Test Point Mode. Unit gives audible indication of voltage detected, allowing user to distinguish between nominal and induced voltages.

PureAire Monitoring Systems Inc.
Lake Zurich, IL 60047 6711
Apr 04, 2007 Used indoors or outdoors, PureAire Air Check O2 Deficiency Monitor displays oxygen concentrations from 0.1-25% on local readout and may be linked to dedicated companion controller or PLC. Stand-alone unit operates on 24 Vdc power and performs continuous monitoring via zirconium type sensor, which offers 15 sec response time and provides accurate measurements over -4 to +122°F and 0-99% RH ranges. Low-maintenance sensor features 3-5 year operational life.

Duncan Instruments Canada, Ltd.
Toronto, ON M9L1Z8  Canada
Apr 04, 2007 Model PSI 8031FC Safety-Fused Open-Phase/Phase Sequence Indicator features red, white, and blue fused test leads/crocodile clip assemblies, each rated at 600 V, ½ A, for connecting to ac power lines. Device has 110-600 V operating voltage, with dielectric strength of 5,550 Vac for 1 min and time limit of ac voltage above 500 Vac of 5 min. At 106 x 75 x 40 mm, dual function tester/indicator is housed in fire-retardant plastic and weighs 350 g.

Ingen Technologies, Inc.
Calimesa, CA 92320
Nov 07, 2006 Suited for use in hospitals, outpatient therapy, nursing homes, and emergency response facilities, OxyView(TM) pneumatic flow meter delivers confirmation of actual continuous flow and volume of oxygen. Lightweight, pneumatic gauge is attached to oxygen tubing just below neck and can be engaged between nose or mouth-mounted cannula where compressed oxygen supply is delivered to cannula through flexible conduit.

Federal Signal Corp., Signal Div./Electrical Products
University Park, IL 60466
Nov 06, 2006 USIX UniStat® Indicators offer 4 different flash patterns, enabling TC tri-color models to produce 12 flash/color combinations and QC quad-color models to produce 16 flash/color combinations. Units feature T6 temperature rating, except for Class 1, Div 2 Groups A, B, C, and D models, which have T5 rating. Operating temperature is -40 to 66°C.

Lumex Inc.
Palatine, IL 60067
Oct 20, 2006 Through-hole SSF-LXH103xx Series contains right-angle mounted T3 LED with center raised 0.20 in. off PCB. Blue and white versions offer light intensities and viewing angles of 80 mcd/60° and 500 mcd/30°, respectively. SMT SSF-LXH305xx Series includes 2-piece indicators with right-angle mounted T3 LED that positions centerline of LED 0.14 in. above PCB. Blue version has same ratings as above, while 2 white versions offer respective ratings/angles of 800 mcd/30° and 400 mcd/60°.

Mahr Federal Inc.
Providence, RI 02905
Sep 19, 2006 MarCator Digital Indicators feature USB connectivity that allows multiple indicators to be linked to PCs through USB hub, without multiplexer. With large LCD displays, MarCator 1086 and 1087 include integral tolerance function that can display measured values within tolerance zone, or indicate in- or out-of-tolerance conditions without measured values. Indicators also come with button lock function, in./mm selection, ABS feature, and adjustable factor.

Rieker Instrument Co., Inc.
Folcroft, PA 19032
Aug 04, 2006 Housed in environmentally protected, Zinc metal package, H4 Series provides single-axis inclination sensing with angle ranges of ±30, ±45, and ±70°. Units are available with 0-5 V analog outputs, or digital serial outputs, which transmit angle, in decimal format, in continuous stream of readings. They incorporate liquid capacitive sensing element for vibration damping with 2 levels of integrated temperature compensation, depending on required accuracy.

Industrial Scientific Corp.
Oakdale, PA 15071 1500
Aug 01, 2006 Operated via 4-button interface, dockable GasBadge® Pro with HCN sensor option is suited for use in precious mining, gold plating, food and beverage, and hazardous materials industries. It can be adapted with interchangeable smart sensors to monitor unsafe levels of oxygen or any one of 9 other toxic gases. Audible, vibrating, and visual alarms indicate when set ranges are exceeded, and backlit LCD displays gas and concentration level. Product logs up to one year of survey data.

Cardinal Scale Co.
Webb City, MO 64870
Jun 16, 2006 With NEMA 4X/IP66 stainless steel washdown enclosure and 1 in. high LCD display, Model 215 Digital Weight Indicator features dual serial ports, 10-key numeric keypad, and multiple print formats. Utilizing 10 AA rechargeable batteries, it powers 8 load cells. Functions include axle weigher operation mode, 3 preset weight comparators, time and date with selectable 12 or 24 hr operation, count feature with accumulator, push button tare, and gross and net conversion.

H2scan Corp.
Valencia, CA 91355
Jun 15, 2006 Providing real-time measurements in extreme conditions, HY-OPTIMA handheld model 500 and HY-ALERTA in-line model 700 include membrane and coating over sensor die that allows hydrogen to penetrate but prevents penetration of moisture, CO, Sulfur, and other gases. Sensing element of both models utilizes palladium nickel capacitor and palladium nickel resistor for threshold measurements from 15-5,000 ppm. In-line model can operate in process streams up to 125°C.