Mocon    Minneapolis, MN 55428
Feb 16, 2012 With optical sensor that gives off light directly related to amount of oxygen present, OpTech® - O₂ system enables non-invasive, non-destructive thermoformed blister package testing. System complies with ASTM F2714, is stable in ambient light, and can determine oxygen headspace, dissolved oxygen, ingress, and permeation rate in flexible and rigid packaging under real-life conditions. Values are read in 0.5 sec, and oxygen measurement range is 0.001%-25%.

Lumex Inc.    Palatine, IL 60067
Feb 01, 2012 Eliminating need for AC-to-DC power conversion, QuasarBrite 120 Vac LED comes in round configuration with 7 mm diameter, and can be customized with wire lengths from 6 in. to 6 ft. RoHS-compliant unit is available in blue, white, red, yellow, and green. Typical applications include green energy technology such as monitors on solar panels; industrial control, such as flow meters; commercial appliances; and communications equipment, including network routers and video servers.

G Instruments    San Diego, CA 92128
Jul 20, 2011 Offering 10 point curve for compensation throughout -20 to +120°C range, GCT20K and GCT20K-MB are fully programmable and have probe head constructed of Kynar PVDF. Curve is fully programmable at any time in field; GCT20K-MB also accommodates curve changes at any time over RS485 MODBUS RTU network. Platinum RTD promotes accurate temperature measurement and isolation, and proprietary circuits and algorithms make sure liquid is not polarized or changed.

Emerson Process Management, Rosemount Div.    Chanhassen, MN 55317
Jun 28, 2011 Suited for applications such as tall vessels and distillation towers, Rosemount® 3051S Electronic Remote Sensor (ERS(TM)) System replaces mechanical impulse piping with two 3051S pressure sensors linked together electronically. Differential pressure (DP) is calculated in one of 2 sensors and transmitted via 2-wire, 4-20 mA HART signal. In addition to DP calculation, system provides real-time access to readings from each pressure sensor and scaled output for tank level or volume measurement.

Safety Technology International    Waterford, MI 48327
May 11, 2011 Measuring 5¼ x 5¾ x 1¼ in., STI-34108 has 1,000 ft range and dual antennas for max signal strength. There are 8 zone LED indicators, and devices can be latching or momentary by zone. In Enroll Mode, unit lets users select 1-8 different zones that each representing device and enrolls it when appropriate wireless signals are detected. Receiver can monitor devices such as open/closed garage door, open exit door, and removed fire extinguisher, among others.

Eaton Hydraulics    Eden Prairie, MN 55344
Mar 30, 2011 Designed to continuously monitor health of hydraulic hose assemblies, LifeSense(TM) hose detects when hose is nearing end of its useful life rather than estimating or predicting when hose will fail. Alert is then sent to user so assembly can be replaced to prevent downtime. Single monitoring unit can handle input from multiple hose assemblies. Unlike maintenance programs that replace assemblies at regular intervals, LifeSense allows virtually all of useful life to be utilized.

Mahr Federal Inc.    Providence, RI 02905
Mar 18, 2011 Featuring gasketed case, crystal, and stem assemblies, µMaxum II Series resists fluid contamination. Resolution is selectable in increments down to 0.00001 in. to accommodate application requirements. Two point difference measurement allows comparison of different readings or calculation of measured values. Multiple Factor for ratio measurements allows chordal-type measurements, useful for making ID/OD measurements using V plate, or for gauge fixtures using lever-type non-direct contacts.

Cardinal Scale Co.    Webb City, MO 64870
Mar 16, 2011 Housed in IP69K-rated, watertight polycarbonate enclosure, 190 STORM withstands temperatures up to 176°F and high-pressure wash downs to 1,450 psi. Unit features capacitive touch keys, 1 in. high LCD digits, and built-in RS232 communications port. As pre-assigned target weights are reached, unit's display changes color automatically. Impact-resistant indicator is suited for food processing, chemical industry, and pharmaceutical applications.

Mahr Federal Inc.    Providence, RI 02905
Mar 14, 2011 Based on transducer technology with 10 µin. resolution, µMaxµm® II offers selectable resolution in increments from 0.001-0.00001 in. to accommodate diverse applications. Multiple Factors for ratio measurements allows chordal-type measurements, and 2 point difference measurement allows comparison of different readings or calculation of measured values. Other features include Dynamic Max, Min, TIR; indicator serial number identification; and selectable continuous output.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Feb 07, 2011 Utilizing electrochemical carbon monoxide sensor, Model 450A-1 measures ambient concentration of carbon monoxide in environment and displays measurement on 2-line digital LCD screen. Unit also displays maximum recorded CO value since last reset and has audible alarm that warns of CO levels above 25 ppm. Operating on three AAA batteries, Model 450A-1 offers response time of less than 60 sec and includes built-in backlight for viewing in poorly lit environments.

Packnet Ltd.    Eagan, MN 55121
Nov 11, 2010 Suitable for customers shipping large, heavy crates or containers, ShockWatch DropSpot provides indisputable evidence of mishandling during transportation and shipping. Unit is not activated until adhesive backing is removed and it is applied to product or shipping container. Available in 3 different G-level sensitivity options, sensor can be shipped worldwide to customers without accidental activation and has unique serial number for documentation on bill of lading.

Impress Sensors & Systems Ltd    Berkshire RG7 8PN  United Kingdom
Nov 02, 2010 Measuring 72 x 36 x 77 mm, SWE-73-L digital panel meter features installation depth of 78 mm and has single 4-20 mA current input that also powers device, allowing it to be installed in line with current sensor. Results are displayed on 4-digit, red LED display with 13 mm high digits. Offering peak value detection, unit can display maximum value of sensor output over given time period. It is available with optional IR remote control unit for configuration and programming of display.

BinMaster    Lincoln, NE 68507
Aug 16, 2010 Integrating multiple point measurement data from two 3DLevelScanners, MVL Multiple Scanner System displays visual representation of material surface, which shows high and low points in bin such as cone up, cone down, sidewall buildup, or bridging. Reports generated by 3D software provide data such as volume as percentage, in bushels, or cu ft or meters; max, min, and average levels or distances to product; weight in U.S. tons, lb, or metric tons; and historical logs of bin measurements.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jul 29, 2010 Housed in aluminum die-cast enclosure, Series VPI has NEMA 6/IP67 rating, ensuring protection against ingress of liquids and debris. Units feature spring-loaded splined cams, which require no tools for precise adjustment. Offering 60-360° rotation, mechanical models are designed with 2 SPDT limit switches, while proximity models feature 2 solid-state inductive limit switches, eliminating need for cams to make contact with switches.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jul 20, 2010 Powered by single CR2032 Lithium 3 V battery, Model WTI-100 uses 3 ½ digit LCD to indicate temperatures from -58 to 230°F with accuracy of ±1.5°F and 0.1°F resolution. Stainless steel wall plate allows Model WTI-100 to monitor temperatures in walk-in freezers, indoor swimming pool areas, or general office environments.

Devar, Inc.    Bridgeport, CT 06605
Jul 20, 2010 Supplied in polycarbonate housing with acrylic window, Model PB-LPI 2-wire digital indicator monitors 4-20 mA process signal and provides local indication on LCD with 4 active digits featuring ½ in.-high characters displayed with/without backlight. Digital readout is directly proportional to milliamp input, and configuration is done via 3 buttons at rear of display. Configured to display any combination of numbers between -1999 and +9999, display can be forward or reverse acting.

Weigh-Tronix, Inc.    Fairmont, MN 56031
Jul 09, 2010 Featuring rugged enclosures, XLR Series Remote Displays include model XLR-8 with eight 3.5 in. red LED characters on 26.75 in. long display and XLR-12 with 12-char, 39.00 in. display. Below alphanumeric message, visual confirmation of loading status is indicated via bar graph spanning length of display. Products connect to agriculture scale indicators and other serial devices, automatically detect device's baud rate and broadcast string, and dim to accommodate changing lighting conditions.

LMI Corporation (Linear Measurement Instruments Corp.)    Fenton, MI 48430
Jun 29, 2010 Featuring aluminum housing and hardened stainless steel stem and spindle, LMI Diamondback Digital Indicator is available with ½ or 1 in. travel and either 3/8 in. or 8.0 mm dia stems. It includes protective boot, reference shoulder built into stem for 31.0 and 50.0 mm nominal positions, and 2-piece tip that won't break off in spindle. Absolute mode, tolerance judgment, and button lock secure user settings and unit supports USB, Digimatic, and Serial communication.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 27, 2010 Including rotating vane and thermo-anemometer sensor, Model 89088 measures wind speed, temperature, and wind chill. Constructed of lightweight, sturdy ABS plastic, unit's ABS impeller spins on high-precision jewel bearing for maximum performance. All data can be viewed on LCD in user selectable units of degrees Fahrenheit or Celsius, feet/minute, knots, miles/hour, kilometers/hour, and Beauforts. Unit also features data hold button and 5 min automatic shut-off to conserve battery life.

GAO Instruments Inc.,    Toronto   Canada
May 25, 2010 Using TDR technology, model A0680005 can test line breaks and short circuit faults in twisted-pair, data, high-frequency, and coaxial cables. Standard features include HD backlit LCD screen, test blind zone of less than 2 m, and comparison test function. Able to test 25, 50, 75, and 100 ohm impedance cables, instrument also provides electronic map relevant to time domain and respectively supports minimum test distances of 2,000 and 8,000 m in line short and line break testing.