Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
May 23, 2012 Offered in 3 types, CUI Corrosion Monitoring Sensors may be customized to meet requirements. Continuous Insulated Braid Wire Sensor, using insulated carbon steel wire as corrosion fuse, detects corrosion over large area. Inserted Probe Array Sensor acts as corrosion fuse detector that provides indication of corrosion occurring at pipe surface. Consisting of individual electrical resistance probe, CUI Corrosometer® Probe measures corrosion rate near pipe surface and helps determine underlying cause.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Nov 22, 2011 Constructed of corrosion-resistant 17-4 PH SS, DCMS(TM) uses Corrosometer® electrical resistance corrosion probe element to determine rate of metal loss within downhole tubing. Tubular electronic instrument automatically reads and records corrosion probe at regular user-defined intervals. Upon retrieval of Downhole tool, corrosion rate history is downloaded to PC via Corrdata® II Software. Designed to withstand temperatures to 302°F and pressures to 10,000 psi, unit offers 90-day battery life.

Olympus    Waltham, MA 02453
Jul 13, 2010 Comprised of OmniScan MX PA flaw detector, OmniScan MXU software with corrosion mapping, and HydroFORM Phased Array Probe Carrier with Mini-Wheel encoder, HydroFORM System provides non-destructive testing of metal plates, pipes, and welded components for detection of internal corrosion, mid-wall anomalies, and environmentally damage mechanisms. Phased array probes cover area up to 2.36 in. wide at speed of 3.93 ips with data increment size of .039 x .039 in. in scan and index direction.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Jun 18, 2010 CorrTran® AQUA monitors water and wastewater processes for general and localized corrosion, enabling users to determine effectiveness of corrosion inhibitors. It also enables users to detect and correct corrosion issues for preventative maintenance. When measurement cycle is complete, corrosion rate and pitting value are calculated and relayed to plant personnel as 4-20 mA HART signal. System includes main unit, 100 psi working pressure probe, 10 ft cable, and steel or copper electrodes.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Mar 12, 2010 Supplied in weatherproof case, CORI-GPS utilizes GPS technology with user-programmable, 100 ms increment interruptions for corrosion monitoring. Each portable current interrupter obtains synchronization signal via GPS satellite, and interruption can be performed with ±5 msec accuracy. This results in corrosion monitoring data with close-interval surveys along pipeline without obtaining Instant OFF readings. Also included, 60 A solid state relay avoids polarity or orientation problems.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Jul 06, 2009 Ensuring piping assets are monitored against underprotection from corrosion damage, Cosasco® Side-Stream Assembly monitors parameters such as metal loss, corrosion rate, erosion rate, pressure, temperature, flow, and bacterial activity. Multiple 1 in. tees are included, which can be configured with Microcor® corrosion/erosion rate measuring, Corrater® LPR and galvanic measuring, Bio-probes, and process parameter measuring systems. Corrosion/process data is provided within minutes.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Jun 03, 2009 Configured to meet specific requirements, Side-Stream Assembly can measure metal loss, corrosion/erosion rates, pressure, temperature, flow, and bacterial activity in pipelines. It includes multiple 1 in. tees, each configured with choice of monitoring technologies, and provides data within minutes. Flexible and adaptable configuration does not require plant shutdown for installation, and design enables system to be moved to other test locations.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Apr 27, 2009 Available with Hazardous Area Certification, Microcor® Wireless Transmitter provides corrosion rates in any process media at speeds approaching real time. Unit uses high-resolution metal loss measurement, providing 18-bit resolution and operating from -40 to 70°C. Transmitter works as node in self-organizing network to ensure consistent delivery of data. In event temporary obstruction blocks direct connection, network automatically reroutes signal to adjacent device.

Koslow Scientific Co.    Englewood, NJ 07631
Nov 19, 2008 With no size limitation to test piece, Model 2026 Passivation Tester measures corrosion tendency of stainless steel surfaces. Unit detects surface free iron through galvanic process, which is measured as voltage. Measurement can be repeated over surface of test part and at sensitive spots, such as seams and welds. In addition to all chromium containing stainless steels, Model 2026 is suited for use with precipitation-hardened steels such as 17-4, 15-5, and 17-7.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Nov 13, 2008 Suited for small scale systems or as building block to full ICMS3 Corrosion Management System, Intelligent Interface Unit provides real-time corrosion rates, erosion rates, and pitting tendency in water systems. System integrates RCS digital Microcor, Quicksand, and Corrater corrosion monitoring transmitters to or through SCADA or DCS system. With Symantec PC Anywhere or Microsoft remote desktop, users can access data systems for configuration and graphical interface remotely.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Oct 20, 2008 Using Soil Corrosion Rate Monitor, pipeline operators can quantitatively determine soil corrosivity for External Corrosion Direct Assessment pre-assessment process at time of pipe excavation or inspection. Unit consists of soil corrosion rate probe with replaceable cone shaped tip, and electrochemical Corrater® Aquamate LPR instrument, which includes Solution Resistance Compensation to extend range of soils in which measurements can be made.

GE Sensing    Billerica, MA 01821
Sep 18, 2008 Featuring TFT color screen, 1 Gb memory, and 80 Gb hard disk, Pulsec uses pulsed eddy current (PEC) to deliver diagnostic imaging and depth resolution needed when inspecting multi-layer aircraft structures. Non-destructive tester has 6 hr battery life, weighs 13 lb, and is suited for inspecting difficult to reach places on aircraft. It can also detect cracks and offers on-board, real-time analysis and data recording/storage as well as export capabilities.

Rohrback Cosasco Systems    Santa Fe Springs, CA 90670
Aug 23, 2005 Providing constant surveillance of atmospheric environment, Model ECM(TM) allows rapid detection of humidity, temperature, and differential pressure, permitting corrective action before damage to sensitive equipment occurs. Utilizing 2 thin-film sensors, unit displays corrosion rate using indicator lights that correspond to ISA classifications of environments for copper and silver. Analog and/or digital outputs provide remote alarming, display, and recording.

Atlas Material Testing Technology LLC    Chicago, IL 60613 1831
Jan 20, 2004 Model CCX Advanced Cyclic Corrosion Cabinet with 90°C option features temperature-resistant materials for dispersion towers and connectors, temperature-resistant fiberglass shell and gel coat, fiberglass cover with tempered-glass viewing window, and insulation around exposure zone. Unit replicates stresses that result in degradation including salt-saturated air and salt spray, high humidity, condensation, sunlight, and temperature variations.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 31, 2003 Corrosion Detection Transmitters allow user to monitor, online, effectiveness of corrosion inhibitors, and to detect and correct corrosion issues through preventive maintenance. They feature 2-wire, loop-powered, 4-20 mA signal with HART protocol. Suited for direct or remote mounting, transmitters can be located in general-purpose and hazardous locations. Probes are available in various styles and materials so they satisfy most applications.