|
|
|
|
Test & Measuring Instruments ->
Indicators
Indicators
(Showing headlines 221 - 240) << 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 ...
|
 Power Detectors target emitter-type light sources.Gigahertz-Optik Inc.
Newburyport, MA 01950 4009
Dec 30, 2009
Measuring 43.5 x 25 x 17.5 mm, ISD-1.6-Si-1 and ISD-1.6-Si-FC-1 with FC connector for spectrometer feature 16 mm dia sphere for light sources such as laser diode dyes and optical fibers. Silicon photodiode detectors measure beam power through 3 mm measurement port. They offer spectral range from 400-1,100 nm and typical absolute sensitivity of 200 µA/W at 630 nm (500 mW max power). Detector heads are traceably calibrated and certified to international standards.
|
Inline Power Meter gathers intelligence from basic PDUs.Raritan Computer, Inc.
Somerset, NJ 08873
Dec 18, 2009
With built-in monitoring, security, and networking, Dominion® PX-3000 Series lets data centers add power, energy, and rack environment data collection capabilities to stand-alone IT equipment or racks containing basic rack PDUs. Series provides strip-level metering and environmental monitoring and is also intended to power stand-alone equipment with dedicated circuits. Real-time information can be seen with local display at rack as well as from remote GUI via Web browser.
|
 Fluid Level Sight Glasses suit explosion risk environments.J. W. Winco, Inc.
New Berlin, WI 53151
Dec 09, 2009
Compliant to European 94/9/EG guidelines, Series GN 743.6 metric sized ATEX explosive protective fluid level sight glasses feature body of turned aluminum, ESG scratch-proof glass sight glass, stainless steel retaining ring, and seal made of FPM rubber (Viton®). Sealed with o-ring on periphery and not on face edge of glass makes leak tightness unaffected by axial pressures. Seal is also housed in groove and cannot be lost. Cold/heat resistance range is -4° to 300°F.
|
Portable Optical Multimeter also provides laser source.GAO FiberOptics Inc.
Toronto Canada
Dec 08, 2009
Designed to carry out absolute and relative power tests as well as optical loss tests, Model 801 is suited for use in optical telecommunication, CATV, and labs. Unit supports multi-wavelength precision measurement and automatic bi-directional tests. It includes backlit display, low voltage warning, automatic power off, and memory capacity of 50 data items. Laser source operates at dual wavelengths of 1,310 and 1,550 nm, while optical power meter module works at wavelengths from 800-1,600 nm.
|
Acoustic Volume Indicator finds liquid/gas levels in metal tanks.Young Engineering Mfg., Inc.
San Dimas, CA 91773
Dec 03, 2009
Acoustic Volume Indicator Technology is non-intrusive means to determine liquid or gas volume in pressurized or non-pressurized metal tanks. Components include transducer, impactor, and waveform analyzer software that calculates peak frequency from input signal. Able to work in range of temperatures, pressures, installation connections, and fluid specific gravities, 3 versions are available: AVI Automated which includes alarms and remote signals, AVI Laptop, and AVI Handheld.
|
 Explosion-Proof DP Switches meet global standards.Mid-West Instrument
Sterling Heights, MI 48314
Nov 06, 2009
Certified to CSA, UL, and ATEX standards, 220/240 differential indicating switches feature aluminum or 316/316L construction; weather-resistant, 4˝ in. gage front; and ˝ in. FNPT Cable or conduit entry. Model 220-Piston Style switch, rated for working pressures to 4,000 psi, comes in 0-5 to 0-100 psid ranges. Featuring total separation between high and low side, Model 240-Diaphragm Style switch has 1,500 psi working pressure rating and comes in ranges from 0-20 in. H20 to 0-100 psid.
|
 Sequencers/Monitors simplify power management.Maxim Integrated Products
Sunnyvale, CA 94086
Nov 05, 2009
Respectively capable of simultaneously managing up to 12 and 8 supply voltages, MAX16065 and MAX16066 are flash-configurable sequencers/monitors that integrate ±2.5% accurate current monitoring/group sequencing as well as ±1% accurate voltage monitoring/sequencing. Internal ADC and nonvolatile fault registers store and read back fault data. Also provided, graphical configuration tool helps generate data to analyze fault data or test different configurations.
|
Rudder Position Meter has backlit design.Yokogawa Corp. Of America, Meter & Instrument Div.
Newnan, GA 30265
Nov 05, 2009
Based on input signal from position transducer, RM3 Rudder Position Meter provides continuous analog indication of rudder position of boat/ship with ±2.5° accuracy. Construction includes anodized aluminum can, brass hardware, and 3.1 in. dia indicator face with white pointer. Waterproof from front of panel and dust proof from back of panel, meter offers ±125° element/pointer movement, span adjustment for voltage input, as well as span and zero adjustment for resistance bridge input.
|
Wireless Monitoring System helps data centers save energy.Arch Rock Corporation
San Francisco, CA 94105-4120
Nov 04, 2009
Utilizing PhyNet(TM) non-disruptive IP-based wireless sensor network technology, Arch Rock Energy Optimizer-Data Center Edition measures both power and cooling system efficiency in data centers. Managers can baseline data center against ASHRAE benchmarks; identify factors that cause energy waste, hot spots, or other harmful conditions; and optimize available capacity for new servers based on actual electrical/cooling consumption of equipment.
|
 Tension Indicators feature compact, general-purpose design.Dover Flexo Electronics, Inc.
Rochester, NH 03867
Oct 29, 2009
Powered by 24 Vdc, EasyView tension indicators amplify web tension signal from transducers installed in machine's web path. Web tension amplifier displays tension reading on analog or digital meter, while supplying isolated 0-to-10 Vdc tension signal output to PLC, drive, or controller. Zero and calibration settings are stored digitally, allowing stable and drift-free output over time and temperature variations. Full enclosure and open panel mount versions are available.
|
Power Meter/Sensor facilitates fluorescence microscopy.EXFO
Quebec G1M 2K2 Canada
Oct 29, 2009
With X-Cite® XR2100 Power Meter and XP750 Objective Plane Power Sensor, researchers can measure optical power at specimen level. XP750 fits on microscope stage and measures output from X-Cite® illuminator or any other epi-fluorescence light source with power sensitivity from 5 µW to 500 mW at wavelengths from 320-750 nm. Featuring control keypad interface, XR2100 allows power measurements to be stored to unit or downloaded into exportable data files via computer.
|
 Tilt Controller allows adjustment of solar panel angles.Fredericks Company, The
Huntingdon Valley, PA 19006-6232
Oct 20, 2009
Available in +10° high gain, +25° standard, and +50° wide angle versions, IRIS Tilt Controller enables measurement and command of tilt movement in any direction with reference to unchanging gravity vector. Unit detects angular position using onboard electrolytic tilt sensor with no mechanical moving parts to break or wear out. IRIS can be used to adjust solar panel angles to achieve maximum light intensity and power levels and to detect misaligned panels.
|
 Test Stand facilitates torque measurement.Mark-10 Corp.
Copiague, NY 11726
Oct 13, 2009
Offering all mechanical specifications of TSTM test stand, TST-DC/TSTMH-DC Motorized Torque Test Stand provides 100 lb-in. torque capacity. Modular unit includes fixture mounting plate and enables quick engagement and disengagement of samples. Stepper motor design prevents speed variation with load. Stand works with variety of force gauges offering capacities from 50 g full scale to 1,000 lb and capturing peak force in both tension and compression.
|
 Fiber Optic Power Meter operates between 780-1,700 nm.GAO RFID Inc.
Toronto Canada
Oct 06, 2009
With input range between -43 dBm to 27 dBm, portable fiber power meter, model 3023 is designed for engineers working on single mode optical cable network installation, debugging and maintenance in telecommunications networks, CATV networks, and local network projects. It has backlit LCD screen to display data, and comes with both FC and SC connector. Basic accuracy of instrument is ±1% and meter can work continuously for 20 hr on full charge.
|
 Multi-function Power Meter includes 100BaseT Ethernet.Electro Industries
Westbury, NY 11590
Sep 15, 2009
Utilizing Modbus TCP as standard protocol, Shark100 is 0.2% accurate and certified to meet IEC and ANSI class standards. Users can equip instrument with either RS485 or 100BaseT Ethernet communication. Applications include switchboard panel metering, campus metering, utility billing, sub-metering, and substation metering.
|
 Measurement System records spot weld force.Sensor Developments, Inc.
Orion, MI 48359
Sep 11, 2009
Storing all information in Tablet PC or laptop for each recording, Bluetooth-enabled weld probe lets technicians follow schedule of maintenance for each welder via GUI. Sensor links up with PC upon power-up, and each clamping force measurement is stored automatically, along with date, time, and designation of welder. Upon completion of each measurement, technician is directed to next welder on list. When audit rounds are complete, technician may print/save audit data for QC.
|
 Wireless Alarm serves as burglary and audible alert device.DMP
Springfield, MO 65803
Sep 03, 2009
Compatible with all DMP burglary panels and 1100 Series receivers, Model 1119 Wireless Sounder provides audible tone while sending signal to panel, and can be used as alternative to crash bars in retail/commercial applications. Single-zone module is equipped with long-life battery-powered sounder. Unit can also be used to augment keypad chime with additional annunciation that can provide notification of side or back door openings.
|
Supply Monitor integrates adjustable watchdog, reset timers.Linear Technology Corp.
Milpitas, CA 95035
Sep 01, 2009
Supplied in 4 x 3 mm, 16-lead MSOP, LTC2939 six-channel supply monitor with processor supervisory functions can be configured for low-voltage applications down to 1.2 V. One of 16 preset or adjustable voltage threshold combinations can be selected, all of which maintain ±1.5% accuracy from -40 to +125°C. Along with power supply glitch immunity, features include 3-state watchdog input as well as reset and watchdog timeout periods that are adjusted using single external capacitor.
|
 Handheld Power Meter is suitale for field use.GAO Instruments Inc.,
Toronto Canada
Aug 27, 2009
Designed for measurement of absolute optical power and relative optical loss, model A0670008 can be utilized in telecom and CATV maintenance and fiber optic test labs. Dust and water resistant unit tests optical power within wavelength range from 800-1,650 nm, and displays test results on high resolution LCD screen in mW, dB, and dBm. It offers calibrated wavelengths of 850, 980, 1,300, 1,310, 1,490,and 1,550 nm, and also offers auto-off function.
|
 Sight Glass is designed for biogas digester tanks.L.J. Star, Inc.
Twinsburg, OH 44087
Aug 25, 2009
Made of soda-lime glass, RD300 sight window has outside ring diameter of 295 mm and viewing area diameter of 220 mm. Expanding tubular rubber gasket around perimeter, sandwiched between rings, conforms to irregularities in cement walls and ports to create gas-tight seal. Several options - motorized wiper, manual wiper, washer assembly, Lumiglas® light, Lumiglas VISULEX video camera - are available and facilitate remote operation.
|
(Showing headlines 221 - 240) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
|
|
|