Indicators

Sensors, Monitors & Transducers, Test & Measuring Instruments

Hirschmann (PAT) Names Stevenson Crane Service, Inc. as New Premier Dealer

August 4, 2016

Hirschmann Automation and Control (PAT), Chambersburg, PA has named Stevenson Crane Service, Inc. as the new premier dealer for Illinois, Indiana, and Wisconsin. Stevenson Crane Service, Inc. offers Hirschmann’s entire line of Hirschmann, PAT, and Krueger branded crane operator aids. These systems include load moment indicators (LMI), wireless and hard-wired indicators, anti-two block systems... Read More

Test & Measuring Instruments

Piezo Transducer Buzzers withstand high-moisture environments.

August 4, 2016

With 30 V and 4.25 kHz ratings, externally driven and IP67-rated CPT 1495C 300 (wire lead mounted) and CPT 1495CI 300 (wave solder compatible) feature  sound pressure level (SPL) of 84 dB at 10 cm and 30 to 85°C operating range. For applications where design for continuous immersion below 1 meter is needed, IP68-rated and externally driven CPT 2521C 500 operates from 30 to 85°C and features wire leads and SPL of 95 dB at 30 cm. Max operating voltage is 50 V, and rated frequency is 3.7 kHz. Read More

Display & Presentation Equipment, Test & Measuring Instruments

Half-Inch LED Panel Mount Indicator has IP67 watertight design.

August 3, 2016

Rated for 100,000 hr (min), 656 Series comes in tamperproof, shock- and vibration-resistant, metal housing suited for indoor and outdoor applications. Polycarbonate lens with integrated UV-stabilizer is available in flat and wide-angle domed design for up to 180° visibility. All standard color options – red, yellow, green, blue, and white – offer high-intensity illumination and are daylight viewable. Installation can be made using 6 in. wire lead or with Faston quick-connect blade terminals.
Read More

Test & Measuring Instruments

Wood Moisture Meter provides audible alert.

August 2, 2016

Operating on 9 V battery, Moisture Meter takes moisture level reference measurements on wood and building materials such as wallboard, sheet rock, cardboard, plaster, concrete, and mortar. Icons display low, medium, and high levels of moisture content, while audible alert beeps faster as moisture level increases. Equipped with Data Hold function and Auto Power Off, meter is suited for building restoration projects and applications where moisture detection on floors and under carpets is critical. Read More

Controls & Controllers, Sensors, Monitors & Transducers, Test & Measuring Instruments

Pull Cable Tension Monitor helps prevent errors for contractors.

July 19, 2016

Preventing cable overstretch that can lead to faulty cable installation, touchscreen-operated G-Series Smart Pull produces physical, visual, and audible alerts to let contractors know when pulling force of cable exceeds 80% of manufacturer recommendations. Second alert is given when pulling force has met 100% of tension limit (10,000 lb max). Stored directly in 128 MB onboard memory, information obtained during pull can be exported via onboard USB port or emailed via PullCalc app. Read More

Test & Measuring Instruments

SMT Micro Buzzers suit portable equipment applications.

July 14, 2016

Featuring 4 x 4 mm and 5 x 5 mm footprints, respectively, Models CMT 4023S SMT and CMT 5023S SMT are magnetic transducer buzzers with 2 mm profile, 3 V rating, and frequency of 4 kHz. CMT 4023S SMT carries SPL of 70 dB, while CMT 5023S SMT features SPL of 80 dB. For applications where electrical noise is a concern, 9 x 9 mm Model CPT 9019S SMT features piezoelectric technology and 1.9 mm profile. Device delivers max peak-to-peak voltage of 25 V, rated frequency of 4 kHz, and SPL of 65 dB. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Online Process Meters measure pH, ORP, or conductivity.

July 11, 2016

Providing reliable data and control of process fluids, TX10 pH/ORP and CX10 Conductivity transmitters offer simple monitoring, while TX20 pH/ORP and CX20 Conductivity controllers can also be programmed. TX10 measures pH or ORP and temperature, and CX10 measures conductivity, resistivity, and temperature. TX20 and CX20 models additionally include temperature compensation. Powered by 100–240 Vac, all 4 models have pushbutton interface, clear LCD, and 1/8 DIN enclosure. Read More

HVAC, Sensors, Monitors & Transducers, Test & Measuring Instruments

Portable Temperature Monitoring for Grain

June 27, 2016

Portable Temperature Monitoring for Grain in piles, warehouses, railcars, wagons, trucks, or ships Lincoln, Nebraska - Digital temperature sensor lances and portable handheld readers make it easy and affordable to monitor the temperature of grain, hay, or silage. Detect hot spots and spoilage in grain where cables are either impossible to install, cost prohibitive, or are just needed on a... Read More

Communication Systems & Equipment, Test & Measuring Instruments

High-Accuracy Meter comes in NEMA 1 type enclosure assembly.

June 23, 2016

Serving critical metering applications, Nexus® 1500+ revenue and Class A power quality meter employs Constant Calibration™ technology that self-calibrates meter every 10 sec for optimal accuracy and stability. Product expands switchgear capability and lets user meter critical circuits without switchboard panel redesign. Meter is pre-wired in enclosure, which has shorting blocks and fuses for error-free and accelerated installation. Locking mechanism, also standard, prevents tampering. Read More

Electrical Equipment & Systems, Sensors, Monitors & Transducers, Test & Measuring Instruments

New Yorker Electronics and Mallory Sonalert Partner to Deliver 'Sound' Options with Two New Audio/LED Indicator Series

June 17, 2016

New Audio Alarm and Stack Light Industrial Control Indicators Combine LED Lighting with State-of-the-Art Audio Capabilities NORTHVALE, NEW JERSEY – Mallory Sonalert and franchise distributor New Yorker Electronics are delivering two innovative, new indicator series with both sound and LED light capabilities. The first is Mallory Sonalert’s ZT Series, the first to combine a loud audio... Read More

Test & Measuring Instruments

Rate Indicator/Totalizer offers flexibility via design options.

June 15, 2016

Supplied in NEMA 4X or explosionproof enclosure, HIT-4U is available flow meter mounted or remote mounted on 2 in. or smaller pipe. NEMA 4X enclosure offers options for local Modbus access ports via USB port or hardwired access through strain relief, and readability-optimized display allows viewing of flow rate, total, and grand total along with data logs. Along with 12-point linearization, features include dual set point alarm output, and battery or loop-power with lithium battery backup. Read More

Test & Measuring Instruments

Sight Glasses with FDA-Food Grade Sealant are Released for Production

June 9, 2016

Encole has developed sight glasses with a quartz-to-metal bonding adhesive approved by the FDA for the food processing industry. Specifically, the bonding material used in the Encole sight glasses meets FDA CFR 175.300 Food Grade Testing Requirements. Sight glasses made from 316 stainless steel, GE-124 Quartz and the FDA-approved adhesive can be used in food and foodstuffs processing... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Inductive Proximity Sensors have miniature, IP67 design.

May 23, 2016

Offered as NPN or PNP models and with NO or NC outputs, 4–8 mm inductive proximity sensors have stainless steel, shielded housings with IP67 rating. Standard sensing distances are 0.8 or 1.5 mm, and extended-distance models have 1.5 or 2 mm ranges. Along with 360°-visible yellow output LED, features include built-in overload protection and attached 2 m axial cable or M8 connector. Axial and right angle zinc-plated mounting brackets are also available. Read More

Optics & Photonics, Test & Measuring Instruments, Green & Clean

Capstone Power Development Employing Cutting Edge Technology by Pentalum for Upcoming Wind Power Projects

May 20, 2016

TORONTO - Capstone Power Development will be relying on Pentalum Technologies' SpiDAR wind LiDAR to provide real-time wind speed measurements at four Ontario wind farms reaching commercial operation in 2016. Meteorological information gathered from the SpiDARs will be reported to the Independent Electricity System Operator for its centralized forecasting program. Meteorological... Read More

Electrical Equipment & Systems, Test & Measuring Instruments, Transportation Industry Products

LED Panel Mount Indicators support frequent on/off cycling.

May 19, 2016

Featuring round protruding LED position that offers 25–50° viewing angle, L63 Series 3 mm Diffused LED Indicators achieve full brightness in microseconds and are suited for applications subject to frequent on/off cycling including aircraft instrumentation, industrial control panels, and transportation dashboards. Units offer front panel snap-in mounting and fit into 0.244 in. hole without additional hardware. Available in red, green, and yellow, 2–3.2 Vdc devices are designed with straight leads. Read More

Test & Measuring Instruments

Portable Drum/Barrel Scale has wall/desk mount weighing indicator.

May 19, 2016

Used to weigh drums, barrels, and other industrial containers, Alliance/CAS R-Series constructed of steel, has anti-skid diamond plate deck, and is available with 500 x 0.2 lb and 1,000  x 0.5 lb capacities. This heavy-duty, 42.75 x 39.5 x 3.5 in. platform scale, featuring live side rails, 2 handles, and 2 rubber wheels, also provides CI-200 Series weighing indicator with 10 numeric keys, 2 function keys, and 6-segment, 1 in. LED display; internal resolution is 1/520,000 A/D. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Time-Temperature Indicator monitors seafood products.

May 18, 2016

With FlashLink Mini Electronic TTI, seafood shippers and receivers can monitor temperature of fresh refrigerated and vacuum packed products during transport and storage. Single-use device has pre-configured threshold of 41°F and is set to trigger alarm if accumulative temperature abuse occurs above this threshold for 4 hours or more. Providing immediate pass or fail indication from flashing green or red LED, indicator helps ensure FSMA, FDA, and HACCP compliance. Read More

Non-Industrial Products, Test & Measuring Instruments

Small Business Braves the Exclusive World of Military Timing and Counting Instrumentation

May 17, 2016

A small business located in Peekskill, NY is now bucking the trend and is the only small business manufacturing Elapse Timer Indicators (ETI) and their close cousins, Event Counters and Pulse Counters based on MIL-DTL-7793. Until now the niche market for these devices has been dominated by big business and defense conglomerates. Solid State ETI’s are widely used on aircraft with Auxiliary... Read More

Controls & Controllers, Portable Tools, Sensors, Monitors & Transducers, Test & Measuring Instruments

Automation Torque Control System increases productivity.

May 9, 2016

With digital adjustable torque setting, variable torque and speed control, and multiple I/O options for integration with PLC, SH-Series helps manufacturers optimize assembly area, reduce labor, and increase productivity. Windows®-based software allows customization for each fastening application, and multiple fastening strategies can be implemented for sensitive or difficult to assemble joints. Robotic fastening system also features built-in error proofing and screw counter. Read More

Test & Measuring Instruments

Digital Calipers and Indicators offer wireless communication.

May 9, 2016

Equipped with low-power transmitters, MarCal Digital Calipers and MarCator Digital Indicators send data to MarConnect i-stick wireless receiver, which supports up to 8 instruments with range up to 12 m. Users can take measurement and transmit data directly into MS Excel or via keyboard code into Windows program without external transmitters. MarConnect wireless interface is active as soon as i-stick is plugged in, and each caliper/indicator is identified by signal coding in MarCom software. Read More