Surface Gages

Portable Tools, Test & Measuring Instruments

Economics 101

October 7, 2015

ASSEMBLY LINE HEADACHES??? QUICK, CALL THE DOCTORS OF MUTILATION PREVENTION! Does your assembly plant have a busy paint repair area? Do you get frustrated when the paint mutilations increase and draws the attention of the plant manager? Well the "MUTILATION PREVENTION DOCTORS" at Assembly Tool Specialists, Inc. can provide you and your associates with cues and solutions that will get the boss... Read More

Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments, Vision Systems

Mahr Federal QUALITY Show 2015 Highlights to Include New MarShaft(TM) SCOPE 250 plus and MarVision QM 300 Video One-Shot Measuring Microscope with Image Processing

October 2, 2015

PROVIDENCE, RI - Mahr Federal will feature the MarShaft™ SCOPE 250 plus, a new addition to their growing family of optical shaft measurement systems, and the MarVision QM 300 video measuring microscope with image processing capability, at The Quality Show, October 27-29, 2015, Donald E. Stephens Convention Center, Rosemont, IL, Booth #1108. Competitively priced and designed to provide fast,... Read More

Electronic Components & Devices, Optics & Photonics, Test & Measuring Instruments

Mahr Federal to Feature New MarShaft(TM) SCOPE 250 plus and MarVision QM 300 Video One-Shot Measuring Microscope with Image Processing at The Quality Show 2015

September 21, 2015

PROVIDENCE, RI – Mahr Federal will feature the MarShaft™ SCOPE 250 plus, a new addition to their growing family of optical shaft measurement systems, and the MarVision QM 300 video measuring microscope with image processing capability, at The Quality Show, October 27-29, 2015, Donald E. Stephens Convention Center, Rosemont, IL, Booth #1108. Competitively priced and designed to provide... Read More

Electronic Components & Devices, Optics & Photonics, Sensors, Monitors & Transducers, Test & Measuring Instruments, Vision Systems

Mahr Federal to Feature New MarShaft(TM) SCOPE 250 Plus and MarVision QM 300 Video One-Shot Measuring Microscope with Image Processing at WESTEC 2015

August 13, 2015

PROVIDENCE, RI – Mahr Federal will feature the MarShaft™ SCOPE 250 plus, a new addition to their growing family of optical shaft measurement systems, and the MarVision QM 300 video measuring microscope with image processing capability, at WESTEC, September 15-17, 2015, Los Angeles Convention Center, Los Angeles, CA, Booth #1835. Competitively priced and designed to provide fast, accurate,... Read More

Test & Measuring Instruments

Portable Surface Finish Gauge offers one-button operation.

February 19, 2015

Available with 10 or 5 µm radius tip on provided general-purpose probe, Pocket Surf® IV displays Ra, Rz, or Rmax with one measurement stroke. MarConnect universal interface allows USB, RS-232, or Digimatic output of data by choosing appropriate cable, and LCD shows measured roughness value in microinches or micrometers within 0.5 sec after surface is traversed. Gauge offers 4 switchable probe positions — axial (folded) or at 90°, 180°, or 270° — and selectable traverse lengths. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

ZTK Drying Gauge

June 18, 2014

ZTK Drying Gauge drying properties, shrinking, mud-crack, cracking and porosity are important characteristics which should be tested during the manufacture of coating materials and fillers. By using drying gauges, reliable product data can be determined by which disagreeable surprises at the users side will be spared. Features •   Gauge for testing coating materials and fillers for... Read More

Test & Measuring Instruments

Camshaft Measuring Machine features Siemens motion control.

March 20, 2014

Designed for use on factory floor, Model 1000 Surface Finish Gauge enables users to press one button and have all surface measurements such as Ra, Rp, Tp, and Rsk performed in one sequence on main and rod journals and thrust faces. System is built on rugged platform of structural steel and granite, and uses 3 stylus tips which are capable of scanning 2,000 points/nm. Users can perform gauge repeatability and reproducibility tests, prove machine capability, and qualify production equipment. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Positector RTR - Replica Tape Reader

December 18, 2013

All Gages Features: Simple • One-handed menu navigation • RESET feature instantly restores factory settings • Automatically subtracts the 50.8 µm (2 mil) incompressible substrate from all readings • Minimizes inspector workload by reducing the number of replicas needed to ensure accuracy Durable • Solvent, acid, oil, water and dust resistant—weatherproof •... Read More

Optics & Photonics, Test & Measuring Instruments

NOVO-GLOSS(TM) 20/60/75° Gloss Meter

November 21, 2013

Which Angle Should I Use for My Application? ASTM D 523 describes three measurement angles to measure gloss across all surfaces. Gloss is measured in gloss units (GU) and is traceable to reference standards held at BAM (Germany), NRC (Canada) or NPL (UK). Universal Measurement Angle: 60° All gloss levels can be measured using the standard measurement angle of 60°. This is used as the... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Mahr Federal to Feature New Micro-Dimensionair® II at MD&M East 2013

May 29, 2013

PROVIDENCE, RI – Mahr Federal will be featuring the new Micro-Dimensionair® II, the next generation of its well-established Micro-Dimensionair line of portable air gages, at MDM East, June 18-20, 2013, Pennsylvania Convention Center, Philadelphia, PA, Booth #2533. The new Micro-Dimensionair II incorporates the enhanced Micro-Maxum® II Digital Indicator and an interchangeable handle to... Read More

Communication Systems & Equipment, Sensors, Monitors & Transducers, Test & Measuring Instruments

Mahr Federal to Feature New Micro-Dimensionair® II at EASTEC 2013

March 28, 2013

PROVIDENCE, RI – Mahr Federal will be featuring the new Micro-Dimensionair® II, the next generation of its well-established Micro-Dimensionair line of portable air gages, at EASTEC, May 14-16, 2013, Eastern States Exposition, West Springfield, MA, Booth #3019. The new Micro-Dimensionair II incorporates the enhanced Micro-Maxum® II Digital Indicator and an interchangeable handle to provide... Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Multipurpose Gauge accepts interchangeable probes.

June 15, 2012

By accepting fully interchangeable coating thickness, environmental, surface profile, and ultrasonic wall thickness probes that retain their calibration information, PosiTector gauge body facilitates conversion from coating thickness gauge to surface profile gauge, dew point meter, or ultrasonic wall thickness gauge. Standard and Advanced models feature built-in memory, onscreen statistics, and USB mass storage. Users can also upload stored measurements and generate customizable reports. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

PosiTector® SPG Surface Profile Gage

March 22, 2012

Simple<4444>Fast measurement rate of over 50 readings per minute - ideal for quickly and accurately measuring large surface areas. Large, easy-to-read, graphics LCD Enhanced one-handed menu navigation RESET feature instantly restores factory settings<4444>Durable<4444>Solvent, acid, oil, water and dust resistant - weatherproof 60° angle tungsten carbide tip for long life and continuous... Read More

Laboratory and Research Supplies & Equipment, Test & Measuring Instruments

Mahr Federal to Feature MarSurf® M 400 Skidless Surface Gage at WESTEC 2012

February 21, 2012

PROVIDENCE, RI - Mahr Federal will be featuring the addition of an economical and powerful new skidless surface evaluation system to its MarSurf® line of mobile surface metrology systems at WESTEC 2012, March 27-29, 2012, at the Los Angeles Convention Center, Los Angeles, CA. Mahr Federal will occupy booth #3132.<4444>The new MarSurf M 400 features proprietary motorized probe height adjustment... Read More

Laboratory and Research Supplies & Equipment, Test & Measuring Instruments

Mobile Skidless Surface Gauge evaluates complex parameters.

December 2, 2011

MarSurf® M 400 features motorized probe height adjustment that automatically zeros probe in seconds. Magnetic breakaway probe mounting system protects probes from accidental damage and facilitates changes. System measures all common international parameters and features Bluetooth connectivity between measuring system and evaluation unit with integrated thermal printer. Skidless tracing of surface characteristics allows capture of primary, waviness, and roughness profiles. Read More

Test & Measuring Instruments

Skidless Surface Gauge offers auto-probe zeroing.

September 2, 2011

Designed to measure all common international parameters, MarSurf M 400 features motorized probe height adjustment, which automatically zeros probe in seconds. Magnetic breakaway probe mounting system protects sensitive probes from accidental damage and facilitates probe changes. Compatible with all appropriate DIN, ISO, JIS, ASME and MOTIF standards, MarSurf M 400 features Bluetooth connectivity between measuring system and evaluation unit with integrated thermal printer. Read More

Sensors, Monitors & Transducers, Test & Measuring Instruments

Coating Thickness Gage also measures surface roughness.

June 1, 2011

Supplied with glass calibration plate and leather pouch, Model SP1560 TQC Surface Profile and Coating Thickness Gage uses 2 different tips, one for surface roughness and another for coating thickness. Unit has 0.3 in. stem diameter and M2.5 x 0.45 thread. Precision-machined gauge provides measurement range of 0-0.13 in. with 0.04 mil resolution and 0.2 mil accuracy. Read More

Test & Measuring Instruments

Form Measuring Machine also performs surface finish measurements.

July 28, 2010

MMQ 200 Surface Finish option, available for MarForm MMQ 200 Formtester, measures surface finish parameters according to ISO, ASME, and JIS standards. Able to sample data with spacing down to 0.5 microns, option uses skidded diamond tipped PHT stylus and MarWin-based surface finish software. Stylus is mounted opposite ruby-tipped form probe on motorized T7W probe head. MMQ 200 automatically swivels probe to apply diamond stylus, and changes from horizontal to vertical measurement as needed. Read More

Test & Measuring Instruments

Surface Finish Gage features Bluetooth wireless drive unit.

September 30, 2009

Capable of taking surface finish measurements up to 4 m from evaluation unit, portable MarSurf® M 300 can take measurements in any position, and has measuring range of up to 350 µm. It offers measurement cut-off length selections of 0.08-2.5 mm, surface parameters conforming to ISO, ASME, JIS, and other standards, and can store up to 40,000 measurement results and 30 profiles. Unit includes PHT 6-350 probe, height adjustment bracket, and power supply with 3 plugs for 90-264 V input. Read More

Test & Measuring Instruments

Five-Axis CMMs offer automated surface finish measurement.

September 29, 2009

REVO® 5-axis machines are available with SFP1 surface finish probe option, which allows surface finish inspection to be fully integrated within CMM measurement routines. With measurement capability of 6.3-0.05 Ra, probe lets CMM users automatically switch between part scanning and surface finish measurement; analysis is contained in one report. Probe incorporates C axis that allows probe tip to be automatically orientated to any angle to suit part. Read More