Lyndex-Nikken Inc.
Mundelein, IL 60060
Aug 03, 2007 Used in tool measurement and inspection, E123 Presetter features solid ground granite column and base construction for rigid and accurate performance. Hand wheels are incorporated for final framing of profile in screen, and fixed rotating spindle uses 6 mini-bearings with radial concentricity error compensation. Offering resolution from 1-5 µm, measurement over 130 mm X-Axis and 360 mm Z-Axis is fully automatic and includes radii as well as angle values.

Sensor Products Inc.
Madison, NJ 07940
Aug 01, 2007 P-Nip® provides operators of rollers, laminators, coaters, and printers, with rolls under 39 in. long, means to get instant spot readings of nip width. Accurate to ±2%, portable electronic device captures nip readings at multiple discrete locations across roller sets' face length. Solution consists of LCD display and replaceable sensor finger that extends from top. Designed for nips that are 1/16-½ in., unit records reading within seconds and includes memory for reading storage.

Webster Instruments
Milwaukee, WI 53235
Jul 27, 2007 Model HPM110 monitors oil, gas, water, hydraulic, pneumatic, and other pressure media in mobile, industrial, and process control equipment. Handheld unit can be installed when required using standard test point or left permanently connected in system. Measuring 3 in. dia, battery powered device simultaneously displays actual pressure, peak pressure, battery level, and engineering units selected, and is available in 1,500 and 8,700 psi versions.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Jul 12, 2007 Featuring stainless steel case and ring, SGA Series is suited for applications where corrosion and vibration are of concern. Gages offer ranges from 15-1,500 psi and are available with lower or back mount connections. Suitable for all media compatible copper alloys, 1.5 and 2 in. units come dry but can be filled in field. Optional U-clamp bracket is available for 1.5 in. dial size model to facilitate panel mounting.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Jun 22, 2007 Suited for pressure and vacuum applications, Series LPG4 gages come with 2.5 in. dial and offer ±1.5% FS accuracy. Units feature beryllium-copper diaphragm attached to brass plate and withstand ambient temperatures up to 140°F as well as process temperatures to 160°F. With dual English and metric scales in inches of water column and kilopascals, gages are available with ranges in vacuum, compound, and positive pressures to 160 in. wc.

Ashcroft Inc.
Stratford, CT 06614
Jun 06, 2007 Ashcroft® 1200 series (ASME grade 2A) pressure gauges provide distinct capabilities needed to monitor pressures in any type of process. While Type 1259 suits basic applications, Type 1279 Duragauge® pressure gauge is designed for use in presence of harsh pressure media, fire hazard, or extreme cycle volumes. Type 1279 Duragauge® PLUS! offers technology that dampens pointer flutter without need for liquid fill, making it suited for environments with pulsation and vibration.

Crystal Engineering
San Luis Obispo, CA 93403
Jun 06, 2007 Model M1 Digital Pressure Gauge provides 0.2% of reading accuracy over entire operating temperature range. Gauge is tested and calibrated inside environmental test chamber using computer controlled pressure controllers and can be used to measure vacuum. Available with protective thermo plastic boot, CE certified product can survive being dropped and subjected to large over-pressure events with no change in calibration.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
May 31, 2007 Along with 0.25% FS accuracy sensor, Series DPG-200 features 4-20 mA process signal and 2 form C SPDT switch outputs that have programmable dead bands. Wetted parts are of 316 and 316L stainless steel, making unit suited for various applications - including control of pressures or fluid levels in tanks. Each 12-24 Vac/dc powered unit comes in NEMA 4X housing with backlit, 4-digit LCD. Ranges from full vacuum, compound to 5,000 psig are available.

Sensocon, Inc.
Lakeland, FL 33801
May 30, 2007 Featuring digital push-button calibration and optional 4-20 mA output, Series A1 and A2 gauges can be used to measure positive, negative, and differential pressure. Both accept universal power from 24-240 Vac/dc and incorporate 4-digit LED display with 5 user-selectable engineering units. Full-scale pressure ranges of 0.5-50 in. wc are available, with accuracies of 1%, 0.5%, and 0.25%. Series A2 also includes process arch that mimics movement of indicating needle.

Sensocon, Inc.
Lakeland, FL 33801
May 24, 2007 Featuring optional and digitally scaleable 4-20 mA output, Series A4 can be used to measure positive, negative, and differential pressure as well as air velocity and flow. Products offer digital setpoint control of 2 SPDT relays and other variables, and programming can be done on OLED display, which also shows units of measure, setpoints, or other users-defined variables. Full scale pressure ranges of 0.5-50 in. wc are available with accuracies of 1%, 0.5%, and 0.25%.

American Sensor Technologies, Inc.
Mt. Olive, NJ 07828
May 18, 2007 AccuGauge AG200 displays psi, bar, kg/cm, ATM, inches H2O, and inches Hg on LCD and incorporates test button to evaluate loop current and adjust it in 2 mA increments. Gauge offers 4-20 mA output signal, is supplied with 7.5-32 Vdc power, and operates in temperatures from 14-158°F and can be stored in -40° to 150°F. Loop current update rate is 32 times/sec, with display update rate of 3 times/sec, and units are available in pressure ranges from 0-50 to 1,000 psi.

DeFelsko Corp.
Ogdensburg, NY 13669
Apr 18, 2007 In addition to built-in wrist strap for secure use, PosiTest® DFT features FLIP Display that enables right-side-up viewing in any position. Unit is available in Ferrous model for steel or Combo model for all metals. Both versions of this inspection instrument offer repeatable measurements and do not require calibration for most applications. Product is suited for use by paint applicators and inspectors.

PCB Piezotronics Inc.
Depew, NY 14043 2495
Apr 17, 2007 Intended for process monitoring/control applications, In-Process Force Measurement system consists of Series M240 ICP® Strain Sensor and Model 410A01 ICP® signal conditioner. System features Peak Hold that allows older PLC systems to stay in synch with high-speed production cycles, while signal conditioner captures/holds peak reading until PLC can scan for value. Solid-state relay resets peak hold value, ensuring high reliability force measurement for fast machine cycles.

Oil-Rite Corporation
Manitowoc, WI 54221 1207
Apr 11, 2007 Mounted flush to tank, Broad View Level Gauge features nylon viewing area of 1¾ in. across in lengths from 3-36 in., allowing unobstructed view from 3 visible surfaces. Upper and lower entry points of tank equalize atmospheric conditions within internal chambers of gauge, ensuring level of liquid in gauge is at exact height of liquid in tank. Gauge is suited for monitoring liquid levels from distance, in dark or confined spaces, or with clear/colorless fluids.

Mahr Federal Inc.
Providence, RI 02905
Mar 29, 2007 Utilizing inductive probe, portable Pocket Surf® PS1 provides measuring range up to 350 µm with measuring force down to 0.7 mN. Unit can measure upside down, mounted on surface plate or measuring stand, or perpendicular to contact surface with optional end face vee-block. Most frequently used parameters, Ra and Rz, are directly selectable with more than 22 others accessible using scrolling function keys. Gauge includes memory, USB connectivity, and optional PC software.

American Block Co.
Houston, TX 77086
Mar 27, 2007 Model 12 differential pressure gauge offers ranges from 0-5 psid through 0-100 psid, and features 6,000 psig working pressure with ±2% accuracy. Available in variety of materials, elastomers, and panel-mountable dials, gauge is used to monitor pressure drop across filters, valves, strainers, separators, and pumps, as well as to monitor local flow indication and control.

D-M-E Company
Madison Heights, MI 48071-2383
Mar 21, 2007 Available as pre-engineered systems, Helical-Gear Stack-Mold Centering Systems include off-the-shelf housings for shafts and nuts, simplifying task of designing, building, and maintaining stack molds. Packages also facilitate entry into multi-parting-line molds for mold builders looking to upgrade capabilities.

Cliplight Manufacturing Company
Toronto M3J2J1  Canada
Mar 19, 2007 Featuring mechanical analog display, TIGAR Mic(TM) connects directly to refrigeration system's low-side pressure valve, eliminating hoses that can skew measurement accuracy. Isolation ball valve prevents gauge damage in event of recovering refrigerant accidentally before obtaining vacuum. Measuring 2½ in. diameter, gauge features 30,000 micron dial with 200 micron increments. Vacuum readings are displayed progressively and cannot be skewed by moisture/oil contamination.

Mahr Federal Inc.
Providence, RI 02905
Feb 27, 2007 Utilizing inductive probe, portable Pocket Surf® PS1 provides measuring range up to 350 µm with low measuring force of 0.7 mN. Drive unit can be rotated as well as moved longitudinally; and PS1 can measure upside down, mounted on surface plate or measuring stand, or perpendicular to contact surface with optional end face V-block. Using USB interface, gage connects to PC for transfer and storage of data without requiring installation of software or drivers.

Mid-West Instrument
Sterling Heights, MI 48314
Feb 23, 2007 Featuring 2½, 3½, or 4½ in. dial, Model 124 is available with 316/316L SS body, 316 SS springs and internals parts, as well as variety of elastomers. Gauge provides differential pressure ranges of 0-5 psid through 0-400 psid and is over-range protected in either direction up to 5,000 psid. Hermetically sealed, SPST or SPDT magnetically actuated reed switches are available as options and provide high and/or low alarm control.