DeFelsko Corp.    Ogdensburg, NY 13669
May 22, 2013 PosiTector® 200 Ultrasonic Coating Thickness Gage measures thickness of polyurea and other coatings on concrete, up to 300 mil. Unit accepts all coating thickness, surface profile, environmental, and wall thickness probes. Advanced models include Wi-Fi and graphics mode with screen capture for detailed analysis of coating system.

DeFelsko Corp.    Ogdensburg, NY 13669
May 22, 2013 With probe change, PosiTector can convert from coating thickness gauge to surface profile gauge, dew point meter, or ultrasonic wall thickness gauge. Each probe retains its own calibration information, allowing for full probe interchangeability. Available in Standard or Advanced models, gauge features built-in memory, onscreen statistics, and USB drive. Advanced models also include high-contrast reversible color LCD, onscreen batch annotation, real-time graphing, and picture prompting.

Adcole Corp.    Marlborough, MA 01752-3067
Apr 29, 2013 Featuring automatic programmable headstock with 100 mm travel, ADCOLE 1310 High-Speed Camshaft Gauge measures radius, profile, taper, crown, timing angle, diameter, velocity, acceleration, run-out, roundness, and concentricity. Unit provides 0.1 micron resolution per data point, or 3,600 data points per revolution. Capable of handling changeovers automatically, machine includes dual computers, Windows XP® software, GE Fanuc® motion controllers, and graphic display.

Olympus    Waltham, MA 02453
Dec 06, 2012 Utilizing magnetic method, Magna-Mike® 8600 makes thickness measurements on glass, composites, and non-ferrous metals such as aluminum, brass, copper, and titanium. Gauge offers straight and angled magnetic probes with replaceable wear caps, color LCD with full VGA resolution, and USB/RS-232/VGA outputs. Internal data logger stores more than 475,000 thickness readings in various file formats, while Micro SD card slot provides additional storage and data transfer.

Adcole Corp.    Marlborough, MA 01752-3067
Nov 27, 2012 Providing parts inspection with 1 minute cycle times, Model 1304 measures 3,600 data points/revolution, and can be loaded automatically by gantry or manually. Featuring 4 programmable moving heads and tailstock with 6 in. travel, gauge allows parts access from touchscreen and handles different length parts. Menu-driven unit has dual Windows 7® computers and can measure 20 parameters including roundness, diameter, profile, taper, crown, velocity, acceleration, runout, and concentricity.

Newport Corp.    Irvine, CA 92606
Oct 26, 2012 Portable CONEX-LDS offers 0.01 µrad angular measurement sensitivity and 2 kHz data refresh rate, enabling analysis of resonance modes of structures. Controller is integrated into optical head of autocollimator, occupying only 4 x 1.5 x 1.5 in., and other features include ±0.85° FOV eyepiece, PSD sensor, and RS-422 communications. Autocollimator is used for traditional metrology applications in production environments such as pitch, yaw, straightness, bearing eccentricity, and wobble.

Olympus    Waltham, MA 02453
Oct 03, 2012 Compatible with dual- and single-element transducers, handheld 45MG achieves instant readings from one side of material and delivers repeatable measurements. Functionality is enhanced via optional Thru-Coat® and Echo-to-Echo technology and time-based B-scan. When used with code-activated single element transducer option, unit can make accurate thickness measurements, with resolution of 0.0001 in., on diverse materials. Optional single-element High Penetration feature is also available.

Sunnen Products Co.    St. Louis, MO 63143
Jul 11, 2012 Designed for visibility, bore gauges with large-readout electronic indicators accommodate needs of shops honing production runs of parts that require SPC data at multiple points in bore by providing quick reference for operators. Precision indicators have 6-digit LCD readouts, 11 mm character height, and 3 buttons sized to facilitate operation. Capable of checking bores from .054-12 in. and bore lengths up to 24 in., instruments are accurate to ±0.00012 in. with 0.00005 in. resolution.

DeFelsko Corp.    Ogdensburg, NY 13669
Jun 15, 2012 By accepting fully interchangeable coating thickness, environmental, surface profile, and ultrasonic wall thickness probes that retain their calibration information, PosiTector gauge body facilitates conversion from coating thickness gauge to surface profile gauge, dew point meter, or ultrasonic wall thickness gauge. Standard and Advanced models feature built-in memory, onscreen statistics, and USB mass storage. Users can also upload stored measurements and generate customizable reports.

DeFelsko Corp.    Ogdensburg, NY 13669
Jun 15, 2012 Available with Standard or Advanced features, PosiTector SPG measures and records peak to valley surface profile height in accordance with ASTM D4417-B. Unit includes tungsten carbide probe tip and continuous accuracy. To conform to international standards, field replaceable probe tips are available with 60° or 30° tip angles. Advanced models include color LCD and SmartBatch(TM), which allows entry of user-defined parameters and criteria to comply with various standards and test methods.

Sunnen Products Co.    St. Louis, MO 63143
Jun 12, 2012 Capable of checking bore sizes from .054-12 in. and bore lengths up to 24 in., Electronic Dial Bore Gauges feature precision indicators with 6-digit LCD readouts, 11 mm character height, and 3 large buttons. Users can set upper and lower tolerance limits for GO/±NG judgments, which are then displayed in full-size characters. Accurate to ±0.00012 in. with 0.00005 in. resolution, gauges let users perform scaling calculations, judge tolerance, hold data, and perform general comparison measurements.

Alignment Supplies, Inc.    Maumee, OH 43537
Jun 08, 2012 Supported with dedicated App, ALiSENSOR(TM) LEVEL data collector contains MEMS gyros, accelerometers, and microprocessor. Data of angular and translational movements are delivered via Bluetooth® to iOS unit, which provides environment for operator to analyze data. ALiSENSOR(TM) LEVEL offers ability to select from wide range of measurement units, self-calibration for measurement with new or special fixtures, and instant reports with all data from measurements that can be shared via email or MMS.

CorDEX Instruments Ltd.    Scarborough YO139QD  United Kingdom
May 09, 2012 Used for non-destructive testing to establish extent of corrosion, intrinsically safe UT5000 uses Echo-Echo technology to read metal thickness levels even through painted surface. Intelligent measuring technology can record multiple readings at specific locations, and total of 9 multi-point readings can be saved against each RFID tag on asset or pipeline. Dual-element, 4 MHz transducer is adjustable up to 10 Hz and offers accuracy of ±0.05 mm.

Macro Sensors    Pennsauken, NJ 08110 1334
Feb 28, 2012 Available in 3 standard ranges of +0.020, +0.100, and +0.200 in., BB Series LVDT dimensional gaging probes combine AC-LVDT with linear ball bearing assembly to reduce radial play and core skewing, resulting in repeatability of 0.000006 in. Spring-loaded LVDTs feature rubber bellows covering probe shaft to prevent contaminants from entering into bearing. Probes are available in 4 models including full bridge, half bridge, pneumatic and soft touch.

Adcole Corp.    Marlborough, MA 01752-3067
Nov 04, 2011 Capable of high-speed production monitoring of up to 200 parts/hr, ADCOLE 1310 measures 10 or more parameters, including radius, profile, taper, crown, timing angle, diameter, velocity, acceleration, run-out, roundness, and concentricity. End-of-line gauge provides 0.1 micron resolution per data point. Incorporating Eurocard PCB format with diagnostic test points in front, gauge comes equipped with dual computers, Windows XP® embedded software, and GE Fanuc® motion controllers.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 12, 2011 Along with backlit display and 1 m sensor cable, battery-operated MiniTest 650 features one-pole sensor made of wear-resistant carbide material. Ram- and impact-protection is provided through rubber rimmed casing, and USB interface enables connection to PC. Unit comes in 3 models: with magnetic-induction sensor for measurements on steel substrates; with eddy currents sensor for measurements on non-ferrous metals; and with dual sensor for measuring on both steel or non-ferrous metals.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Jul 21, 2011 Featuring backlit display and 1 m sensor cable, MiniTest 650 is available with magnetic-induction sensor for measurements on steel substrates, eddy current sensor for measurements on non-ferrous metals, or dual sensor for measuring on both steel and non-ferrous metals. One-pole sensor is made of wear-resistant carbide material to ensure virtually unlimited life cycle under normal conditions. Via USB interface, gauge can be connected to PC for online measurements or display of statistics.

Nowlin, Inc.    Columbus, OH 43219
Jul 14, 2011 Resistant to breaks, cracks, and warping, Mite-R-Gage consists of two 10 in. arms that rotate 360° relative to each other, 3½ in. diameter scale recessed into bottom arm, and 2 angle indicator pointer lines located on top arm. Angle between any 2 surfaces can be read from outside scale, while inner scale indicates half-angle value of angle indicated on outside scale. In addition, second pointer on upper arm/leg of protractor indicates complement of half-angle and supplement of measured angle.

DeFelsko Corp.    Ogdensburg, NY 13669
Jun 21, 2011 Standard and Advanced PosiTector® 6000 models feature built-in memory, onscreen statistics, USB mass storage, and Fast mode. Additionally, Advanced models include reversible color LCD, scan mode, onscreen help, real-time graphing, and picture prompting. Instruments can upload stored measurements, generate customizable reports, and share results via secure internet connection. Alternatively, stored readings and graphs can be accessed using universal PC/Mac Web browsers or file explorers.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Jun 01, 2011 Supplied with glass calibration plate and leather pouch, Model SP1560 TQC Surface Profile and Coating Thickness Gage uses 2 different tips, one for surface roughness and another for coating thickness. Unit has 0.3 in. stem diameter and M2.5 x 0.45 thread. Precision-machined gauge provides measurement range of 0-0.13 in. with 0.04 mil resolution and 0.2 mil accuracy.