Totaling Counters

Sensors, Monitors & Transducers, Test & Measuring Instruments

Totalizing Water Meters meet material safety, lead-free standards.

February 25, 2016

Available for pipe sizes from 5/8&ndash;2 in. and suitable for sub-metering applications with respective flow ranges of .22&ndash;22 gpm and .25&ndash;160 gpm, CLXC-P (single-jet) and MJ-SDC (multi-jet) meet ANSI/NSF 61 for materials safety and ANSI/NSF 372 for lead free compliance. CLXC-P meters are rated for cold water to 122°F and hot water applications to +140°F, while MJ-SDC meters are rated for cold water to 122°F. Both meters have 150 psi max operating pressure and 1.5% nominal accuracy.<br /> <br /> Read More

Material Handling & Storage, Non-Industrial Products, Test & Measuring Instruments

Cash Management Devices validate and secure deposits.

September 14, 2015

Targeting retailers, Ascent platform includes note validating as well as coin and note dispensing models. Capabilities for validating and securing cash deposits are complemented by expandability to meet all bill and coin cash handling needs. If multiple types of devices at one location are linked, all connected devices are controlled, captured, and reported as one accounting unit. Icon-driven touch pad interface provides device-level control of deposit transactions and reporting. Read More

Test & Measuring Instruments, Timers & Clocks

Multi-Range Industrial Timer/Counter offers 10-in-1 functionality.

March 6, 2015

Offering 10 operating modes in one unit, Model 385AR series works with proximity switches, solid state devices, and potential-free contact encoders. Respective input speeds of 3 Hz, 30 Hz, and 5 kHz are standard, and unit incorporates 12 Vdc 30 mA sensor power supply with short circuit protection and options for front panel or remote reset. Supplied in 48 x 48 mm housing featuring 2 SPST (NO) 5 A @ 230 Vac contacts, unit offers dual setpoints, programmable input scaling, and batch counting. Read More

Test & Measuring Instruments

Combination Time/Pulse Meter has DIN rail mount design.

September 24, 2014

Used for field testing and recording of elapsed time and on/off cycles as well as maintenance schedule periods, D9454M1 consists of hour meter and event counter. These two meters are connected in parallel (common connections) in standard version to simultaneously keep track of number of occurrences and time, but meters can also act independently of each other. With IP52 rated front side and resistant to shock, product features 0.16 x 0.067 in. digits and operates from 5 to 122°F. Read More

Test & Measuring Instruments

Large Display Electronic Counter features 6 LED digits.

September 15, 2014

Able to be directly connected to input signal source with up to 1 kHz count speed, G90 Series features 6 LED digits up to 4 in. high x 2.36 in. wide. Counting mode is add/subtract and quadrature with reset accomplished remotely. Operating from 100&ndash;240 Vac, counter has built-in memory for count value retention in case of power loss. External 12 Vdc power supply is available for sensors, and other features include decimal point position, free write, and input inhibition. Read More

Test & Measuring Instruments

Electronic Counter transmits totals via Ethernet, 4-20 mA outputs.

July 28, 2014

Available in Basic and Extended versions, ETL-rated L60007FR can output totals digitally via Ethernet I/O as well as scaled, isolated 4&ndash;20 mA analog signal. Dual channels A and B can be independently scaled to count up from zero (or other value) to preset limit or down from preset value to zero (or other limit). Input flexibility is provided by universal dual-channel signal conditioner, and counter also has built-in isolated 5, 10, or 24 Vdc excitation supply. Read More

Software, Test & Measuring Instruments

Precision Digital Announces MeterView EX Programming Software for PD6730 and PD6830 Pulse Input Flow Rate / Totalizers

March 28, 2014

Precision Digital Corporation, global leader in digital panel meters and control instrumentation, today announced MeterView EX Programming Software for the Vantageview PD6730 and ProtEX PD6830 Pulse MeterView EX Programming Software Input Flow Rate / Totalizers. MeterView EX provides plant operators with full control of the meter configuration process using an intuitive layout and an... Read More

Electronic Components & Devices, Test & Measuring Instruments

Electrodes Sales Now Stocks Reliable Industrial Counters, Measuring Instruments and Sensors from Line Seiki

November 25, 2013

Electrotech Sales now stocks reliable industrial counters, measuring instruments and sensors from Line Seiki.  A global leader in the industry, the Line Seiki products include: • Electronic Totalizers/Hour meters • Electronic and Mechanical Counters • Length Measuring Counters • Pulse Generators • Digital Tachometers • Digital Thermometers Please call for price and... Read More

Electronic Components & Devices, Test & Measuring Instruments

Line Seiki Co Now has Inventory in North America

September 6, 2013

Electrotech Sales is happy to announce their partnership with Line Seiki, a Japanese manufacturer of reliable industrial counters, measuring instruments and sensors. A global Leader in the Industry, the Line Seiki products include: • Electronic Totalizers/Hour meters • Electronic and Mechanical Counters • Length Measuring Counters • Pulse Generators • Digital Tachometers •... Read More

Test & Measuring Instruments

Flow Rate/Totalizers feature dual analog or pulse inputs.

August 6, 2013

Featuring independent programming of inputs, including separate selection of input type and scaling, ProVu® PD6262 supports dual analog inputs of 0&ndash;20 mA, 4&ndash;20 mA, 0&ndash;5 V, 1&ndash;5 V, or ±10 V, while ProVu® PD6363 supports dual pulse inputs, including square wave, open collector, NPN, PNP, TTL, or switch contact signals. Both 1/8 DIN meters provide integrated math functions for rate or total flow calculations. For hazardous areas, meters are available as explosion-proof, IP68/NEMA 4X ProtEX®-MAX models. Read More

Test & Measuring Instruments

Flow Rate Meter/Totalizer has explosion-proof design.

February 19, 2013

Designed for display of local or remote flow information in hazardous areas or harsh safe area applications, PD6830 ProtEx®-RTP Pulse Input Rate/Totalizer comes in NEMA 4X, cast aluminum enclosure and carries FM, ATEX, CSA, IECEx, and CE approvals. SafeTouch® through-glass buttons allow operation without removing cover, and flowmeter k-factor units are automatically converted to desired display units. Pulse input accepts range of flow transmitter signals as well as high frequency signals. Read More

Test & Measuring Instruments, Timers & Clocks

Multifunction Devices operate as timers, counters, tachometers.

April 19, 2012

Available in standard 1/16 DIN size, CTT series accepts voltage and non-voltage inputs from NPN, PNP, or dry contact sensors and can operate as digital counter, timer, combination timer/counter, or tachometer. Counting speeds are selectable to 10,000 cycles/sec, and double-line, 6-digit, 2-color LCDs present values and facilitate setup. While Output 1 is SPST relay and NPN transistor that operate concurrently, Output 2 is available as SPDT relay or NPN transistor. Read More

Controls & Controllers, Sensors, Monitors & Transducers, Test & Measuring Instruments

Flow Totalizer can be used as monitor or controller.

February 28, 2012

Aalborg®'s TIO totalizer can be used as monitor for GFM and AFM flow meters or as controller with GFCs and AFCs. It converts analog mass flow meters and controllers into precision digital units via RS 232 or RS 485 interfaces (multi-drop capacity up to 64 devices). Two fully independent programmable totalizers allow up to 9 digit total readings and are updated every 100 msec. Totalizer can be used with third party devices with 0-5 Vdc / 4-20 mA inputs and outputs. Read More

Test & Measuring Instruments

Counters and Tachometers : Crouzet Doubles the Size of Its Counter and Tachometer Range

February 8, 2011

Crouzet, which specialises in electromechanical, electronic and software engineering technology, is launching a thoroughly revised range of 120 counters and tachometers. This range has been devised not only to meet the needs of industrial sectors but also to satisfy the requirements of the building sector. The offer draws on numerous innovations. Objective: To facilitate the processes of... Read More

Test & Measuring Instruments

Multifunction Counter Module has USB-powered design.

April 2, 2010

Available with on board terminal block (screw type) connections or Molex KK series 2 pc pluggable connectors, USB 2.0-controlled JSB542 series DAQ module provides 4 channels of 24-bit counters. Each can be configured as 1 of 5 types of counters: Frequency, Period, Time between pulses, Quadrature, and Event. While Period and time counters have selectable time base of 1-100 MHz, frequency counter has selectable gate times from 1 msec to 2 sec. Read More

Test & Measuring Instruments

Event Data Logger can store 50,000 events on internal memory.

December 21, 2009

Working with dry contact closure or 0-3 and 0-5 Vdc logic levels, Simple Logger® II Model L404 is suited for determining machinery run/down times and event sequencing, counting events, and recording event duration. It offers user programmable event measurement scaling and comes with DataView® software, which provides real-time viewing of measurement data. Battery operation and compact size facilitate installation in tight spaces, while front panel LEDs indicate logger's status. Read More

Test & Measuring Instruments

Mold Counter monitors mold operation and validates data.

June 12, 2009

Using non-resettable, mechanical, 7-digit counter, CounterView records accurate number of mold cycles, and relies on sensor that detects when mold has closed. Each mold cycle triggers display to increase or decrease counting mechanism based on user preference. CounterView also validates process monitoring data and assists mold maintenance procedures. Operating to 250°F, product is available in inch and metric standards and features glass-filled nylon housing. Read More

Test & Measuring Instruments

Totalizer calculates and displays flow rates/totals.

March 2, 2009

Model RT20 calculates and displays flow rates and totals from flowmeters with pulse, sine wave, or frequency outputs. Available as battery operated or externally powered device, it features 6 digit LCD total, 8 digit cumulative, and 5 digit rate display. Housed in IP66/67 rated aluminum field- and panel-mountable housing, product also includes scaleable universal pulse or frequency inputs, scaled pulse output, non-volatile memory and reverse polarity protection. Read More

Computer Hardware & Peripherals, Test & Measuring Instruments

Time-to-Digital Converter offers 5 picosec timing resolution.

December 3, 2008

Model U1050A-002 of U1050A line of Acqiris time-to-digital converters has measurement range of up to 20 sec and ratio of 1:4.109. Module can operate in either single-start or multi-start acquisition modes with timing information on all 13 independent channels encoded relative to common channel. Time measurement on unit can be based on either internal low jitter of less than 3 ps rms, high stability of ±2 ppm clock source, or external 10 MHz reference input. Read More

Services, Test & Measuring Instruments

Foundation verifies field device using HART 7 test spec.

November 10, 2008

Verified by Foundation to meet HART 7 Protocol standard, Hoffer Flow Controls HRT1 Rate Indicator/Totalizer now carries HART Registered mark and provides upgrade and migration path to WirelessHART(TM) communication. Using HART Protocol test tools, suppliers test their device to verify conformance and then submit test data, documentation, and device to Foundation. HCF conducts independent testing to verify compliance to HART Protocol Specification. Read More